1 / 15

The physical mechanisms of short-pulse laser ablation

The physical mechanisms of short-pulse laser ablation. D. Von der Linde, K. Sokolowski-Tinten A summary report by Ryan Newson June 25, 2004. Laser Ablation. Important for materials processing Many permutations of beam parameters; many materials

mulan
Download Presentation

The physical mechanisms of short-pulse laser ablation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The physical mechanisms of short-pulse laser ablation D. Von der Linde, K. Sokolowski-Tinten A summary report by Ryan Newson June 25, 2004

  2. Laser Ablation • Important for materials processing • Many permutations of beam parameters; many materials • Ultrashort pulses (fs-ps) interact fundamentally different than longer pulses

  3. Importance in Our Machining Experiment • This discussion about one ultrashort pulse • Our experiment deals with a train of ultrashort pulses • Important to extend this knowledge to our regime

  4. Experiment Setup • Pump pulse angled so that “sweeping” action can be recorded • Probe pulse (weak w/ orthogonal polarization) provides time-resolved measurements

  5. Breakdown Threshold & Plasma • Previous experiments noticed there existed a threshold “breakdown” intensity of each material • Measured with similar setup, looking at reflectivity change of plasma • Ablation experiment made sure breakdown not reached (no plasma) [6] D. von der Linde, H. Schuler, J. Opt. Soc. Am. B 13 (1996) 216

  6. Physical Processes • Laser hits atoms – deposits energy to electronic states of valence & conduction bands • Energy state distribution – relaxation time tR • Energy transported macroscopically • Displacement of atoms – ablation time tA  Thermal processes dominant when tA >> tR

  7. Materials • Shown in detail is silicon, but many metals and semiconductors used • All show same results (to follow) • Hence results apply to our experiment, where aluminum is primarily used

  8. Time-Resolved Results liquid metallic Si start of ring structure surface resolidification boundary of ablated area amorphous Si

  9. Ring Pattern • Where does it occur? • Used interference microscopy (bottom) • Occurs only on ablation area

  10. Ring Pattern cont. • Physical structure or optical interference? • Varied probe pulse wavelengths • Ring spacing wavelength • Must be interference – Newton rings

  11. Hypothesis • Gas-filled bubble forming in molten material • Some problems… (not supposed to be possible)

  12. Unsteady Isentropic Expansion laser excitation & thermalization isentropic expansions hybrid gas-liquid state

  13. Ablation Layer • Speed of sound drastically lower in hybrid phase • Two steep density boundaries develop • Forms a kind of “gas bubble” hypothesized

  14. Optical Properties • Inhomogeneous phase in ablation layer difficult to model • Can approximate with Maxwell-Garnett model(right) • Calculate n=2 for Si… high enough to explain rings

  15. Summary & Application to Us • Ultrafast pulses ablate material in the fashion outlined in this paper • Ultrafast pulses eject surface material in volatile and sometimes unpredictable states • If the incident intensity is high enough, a plasma can form • If another pulse hit the material immediately after the first, it would interact with the ejected material

More Related