1 / 28

Lecture 2: Using Mutants to study Biological processes

This lecture explores the use of mutants in studying biological processes. It covers the importance of mutants, how mutants are isolated, and the genetic analyses that should be done after a genetic screen for mutants. References are provided for further reading.

mgilchrist
Download Presentation

Lecture 2: Using Mutants to study Biological processes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 2: Using Mutants to study Biological processes • Objectives: • 1. Why use mutants? • 2.How are mutants isolated? • 3. What important genetic analyses must be done immediately after a genetic screen for mutants?

  2. Reading • References: • Cove. 1993.  Mutant analysis, a key tool for the study of metabolism and development.  Plant Journal 3: 303-308. • Westhoff et. al.  Molecular Plant Development: from gene to plant. Chapter 3: 39-65.

  3. Arabidopsis Genome Annotated Gene FunctionYear 2018- 33,602 genes Annotation = assignment of gene function based on sequence alone. # of genes investigated in detail (phenotype, biochemistry, cell biology, molecular biology) is only a few thousand.

  4. Why use mutants? Pick the best answer! ***iClicker! A mutant phenotype is valuable because: • it can be used to identify genes involved in specific • biological processes. • B. it can be used to associate a gene sequence with a • specific biological process. • it can be used to find the DNA sequence of a gene • defined by a phenotype. • D. it may be useful commercially. • E. All of the above.

  5. Why use mutants? Researchers need both phenotypic and biochemical (protein function) information about their gene to understand its role. The identification of a gene by mutant phenotype = forward genetics -use phenotype to find associated DNA sequence The identification of a gene by DNA sequence = reverse genetics -use sequence to find a mutant with a defect in that gene

  6. Forward genetics Goal: Identify genes with a role in a specific biological process by finding mutants defective in that process. Mutant phenotypes provide -- information concerning the role of the gene in vivo. -- method by which to clone the gene that is mutated.

  7. Mutagenesis • Mutants are generated by exposing a population of organisms to a mutagen and allowing the individuals in the population to reproduce. mutagens = irradiation (UV, Xray, fast neutron, etc.), chemicals (ethyl methane sulfonate, nitrosoguanidine etc.), insertional elements (transposons, TDNA) • The mutagen induces multiple mutations in the genome of the cells exposed (M1 generation)

  8. Mutagenesis in Arabidopsis Mutagenized cells are heterozygous in diploids Westhoff Fig. 3.1

  9. Mutagenesis: generation for screening **iClicker!! A mutagen induces multiple mutations in the genome of the cells exposed (In Arabidopsis = M1 generation). Arabidopsis is a diploid organism that reproduces by self-fertilization. What generation would you normally screen to identify homozygous recessive mutants? • M0 • M1 • M2 • M3 • M4

  10. Mutagenesis • Mutants are generated by exposing a population of organisms to a mutagen and allowing the individuals in the population to reproduce. mutagens = irradiation (UV, Xray, fast neutron, etc.), chemicals (ethyl methane sulfonate, nitrosoguanidine etc.), insertional elements (transposons, TDNA) • The mutagen induces multiple mutations in the genome of the cells exposed (M1 generation) The M1 plants are not typically screened for mutant phenotypes-Why?

  11. Mutagenesis in Arabidopsis Westhoff Fig. 3.1

  12. Mutagenesis • Mutants are generated by exposing a population of organisms to a mutagen and allowing the individuals in the population to reproduce. mutagens = irradiation (UV, Xray, fast neutron, etc.), chemicals (ethyl methane sulfonate, nitrosoguanidine etc.), insertional elements (transposons, TDNA) • The mutagen induces multiple mutations in the genome of the cells exposed (M1 generation; mutations are heterozygous in diploids). --Those mutations in germline cells are passed on to the next generation (M2 generation). --In plant species that self fertilize (eg. Arabidopsis) the M2 population will include some plants homozygous for mutations. Therefore: The M2 generation is typically screened for mutant phenotypes

  13. Genetic Nomenclature (Arabidopsis, yeast) A gene is typically named after the mutant phenotype or the biological function with which it was identified. Mutant phenotype=George or george (italics) Gene name=GEORGE(uppercase, italics) (abbreviation)=GEO mutant alleles=geo-1(lowercase italics) geo-2 geo-3 dominance/recessiveness is not indicated protein=GEO(uppercase, no italics)

  14. Basic Genetic Analysis of Mutants(what you should know genetically about any mutant you find) You screened a large mutagenized (M2) population and found three plants with curled leaves, sepals and petals . Hypothesis: Each plant is homozygous for a recessive allele of a single nuclear gene that is needed for the leafy organs of the plant to develop normally. Phenotype = Curly Leaf (Crl) Gene = CRL alleles = crl-1, crl-2, crl-3 What are the competing hypotheses? How do you test your hypothesis?

  15. Genetic analysis **iClicker!! You screened a large mutagenized (M2) population and found three plants with curled leaves, sepals and petal (Crl plants). One mutant you cross to wild type. The F1 progeny appears wild type. In the F2 you find 9/16 wild type, 3/16 curly leaves(normal petals and sepals), 3/16 curly sepals and petals (normal leaves), 1/16 curly leaves, petals, sepals You can conclude that the phenotype is: • due to a recessive mutation in a single nuclear gene. • due to a dominant mutation in a single nuclear gene. • due to a recessive mutation in each of two nuclear genes. • due to a dominant mutation in each of two nuclear genes. • due to a dominant mutation in one nuclear gene and a recessive mutation in a second nuclear gene.

  16. Basic Genetic Analysis of Mutants • Is the mutant phenotype heritable? Allow the plant to self fertilize. Does the phenotype show up in the next generation? Yesheritable Nophenotype is probably not due to mutation.

  17. Basic Genetic Analysis of Mutants • Is the mutant phenotype due to a recessive, codominant or dominant mutant allele? Cross the mutant plant to wild type. If the F1 progeny phenotype is: i) wild type then the mutant allele is recessive (most common) ii) mutant then the mutant allele is dominant iii) intermediate between wild type and mutant then the mutant allele is co-dominant.

  18. Basic Genetic Analysis of Mutants • Is the phenotype of a each mutant due to mutation of one or more than one nuclear genes? Self fertilize the F1 plants and determine the number and type of mutant phenotypes among the F2 progeny. ¾ wild type, ¼ curly leaves,petals,sepals (mutant allele recessive) or ¾ curly leaves,petals,sepals , ¼ wild type (mutant allele dominant) =single nuclear mutation 9/16 wild type, 3/16 curly leaves(normal petals and sepals), 3/16 curly sepals and petals (normal leaves), 1/16 curly leaves, petals, sepals = two nuclear genes, one required for normal leaf development and another required for normal floral organ development.

  19. Make a prediction based on the data ***iClicker! You have a crl phenotype that segregates like a single recessive nuclear mutation. In the crl mutant you discover a homozygous missense mutation in the DNA sequence of a gene (X) and want to know if the missense mutation causes the phenotype. You cross the crl mutant to wild type and self the F1 and select four crl mutants from the F2 progeny. You sequence gene X in each of the mutants and find that two of the mutants are homozygous for the mutation and two are heterozygous for the mutation? You can conclude that the mutation: • A. is the cause of the crlphenotype. • B. is not the cause of the crlphenotype. • may be the cause of the phenotype but there is • uncertainty.

  20. Basic Genetic Analysis of Mutants (Co)Segregation analysis: If two aspects of a phenotype (eg. Curly leaves, curly petals) segregate together (if all plants with curly leaves also have curly petals and vice versa) an F2 population then the mutation(s) causing the phenotypes are closely linked and may be caused by a single mutation. If two aspects of a phenotype can be observed separately in an F2 population (plants with only curly or white leaves) then they are not caused by the same mutation and are due to mutations in at least two different genes (a single recombinant would indicate that two traits are not due to the same mutation).

  21. Basic Genetic Analysis of Mutants Three Crl mutants were found. Do they represent mutations in three different genes or three alleles of the same gene? If the mutants are recessive to wild type and the phenotype segregate as a single nuclear gene then the question can be answered by a: Complementation test

  22. Make a prediction based on the data ***iClicker! If you cross two mutants with the same phenotype that are homozygous for different recessive mutations in the same crl gene, what phenotype do you expect? • Wild type • crl • Phenotype intermediate between wild type and crl • Impossible to tell • I forgot my iclicker today

  23. Make a prediction based on the data ***iClicker! If you cross two crl mutants with the same phenotype that are homozygous for recessive mutations in different genes what phenotype do you expect? • Wild type • crl • Phenotype intermediate between wild type and crl • Impossible to tell • I forgot my iclicker today

  24. Complementation test Mutant 1Mutant 2Mutant 3 Phenotype crlcrlcrl All mutants are recessive to wild type. All segregate as single nuclear genes. Cross every mutant to every other mutant. The following table shows the phenotypes of the F1 progeny of crossing two of the three unc mutants. Parent 2 Parent 1 How many new genes have been identified? Possibilities: 1, 2, 3

  25. Make a prediction based on the data ***iClicker! How many crl genes have been identified by the complementation test data in the previous slide? • 0 • 1 • 2 • 3

  26. Complementation test The idea of a complementation test is that for a mutant that is homozygous for a recessive (loss-of function) mutation that results in a phenotype, the phenotype can be rescued (complemented) if at least one normal (wild type) copy of the gene is introduced. A normal copy of the gene can be introduced by crossing the mutant to a wild type plant (classical complementation) or introducing a copy by transformation.

  27. Complementation test Mutant 1Mutant 2Mutant 3 CrlCrlCrl All mutants are recessive to wild type. All segregate as single nuclear genes. How many genes have been identified? Possibilities: 1, 2, 3 TestDeduction Mutant1 xMutant 2Mutant1 xMutant 2 CrlCrlcrl1-1/ crl1-1 crl1-2/ crl1-2 Result F1F1 Crl crl1-1/ crl1-2 Conclusion: Mutants 1 and 2 fail to complement and must be homozygous for mutations in the same gene

  28. Complementation test TestDeduction Mutant 1 xMutant 3Mutant1 x Mutant 3 CrlCrlcrl1-1/ crl 1-1CRL 1/ CRL 1 CRL 2/ CRL 2crl 2-1/ crl 2-1 Result F1F1 Normal leaves, sepals,petalscrl-1/ CRL1 CRL2/ crl2-1 Conclusion: Mutants 1 and 3 are in different To have a wild type phenotype the F1 complementation groups. Mutants must be heterozygous for mutant Are homozygous for mutant alleles alleles of two different genes. of different genes. Conclusion: The three Crl mutants identify two different genes required for normal leafy organs. CRL1 and CRL2

More Related