1 / 37

Grader: Sensors Calibration and Hydraulic Valve Calibration

Grader: Sensors Calibration and Hydraulic Valve Calibration. Sensor Calibration. Depending on the machine configuration, the following options are available under Configuration / Calibrate Sensors Mainfall, blade slope and rotation sensors Calibrate sensors together or individually

mcleanp
Download Presentation

Grader: Sensors Calibration and Hydraulic Valve Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Grader: Sensors Calibration and Hydraulic Valve Calibration

  2. Sensor Calibration • Depending on the machine configuration, the following options are available under Configuration / Calibrate Sensors • Mainfall, blade slope and rotation sensors • Calibrate sensors together or individually • Electric mast

  3. Mainfall, Blade Slope and Rotation Sensors • All sensors are calibrated together in this option • Performed when the machine is first installed or when the accuracy of the system does not meet spec. • Follow the instructions on the “wizard”

  4. Mainfall, Blade Slope and Rotation Sensors

  5. Mainfall, Blade Slope and Rotation Sensors

  6. Mainfall, Blade Slope and Rotation Sensors

  7. Mainfall, Blade Slope and Rotation Sensors

  8. Sensor Calibration - Blade Slope • Perform a blade slope calibration when only the blade slope calibration is suspect • E.g. Blade is badly worn or cutting edge has been replaced since the last sensor calibration.

  9. Sensor Calibration - Blade Slope

  10. Sensor Calibration – Rotation Sensor

  11. Sensor Calibration – Rotation Sensor

  12. Sensor Calibration – Mainfall Sensor • Perform a mainfall sensor calibration when only the mainfall sensor reading is suspect • Make sure the machine is parked on flat level ground and press “Calibrate” • This function zeros the sensor

  13. Sensor Calibration – Mainfall Sensor

  14. Sensor Calibration – Mainfall Sensor

  15. Sensor Calibration – Electric Mast • EM400 is a mechanical device • EM400 calibration allows us to reset zero point • Maintains integrity of dimensions against EM400 extension

  16. Sensor Calibration – Electric Mast

  17. Valve Calibration - Basics • Allows smooth automatic control • GCS900 monitors the valve movement and computes a response curve. • Before starting the valve calibration you need to ensure that the machine measurements are entered into the CB430 • The valve calibration should be done with warm oil and at normal operating revs. • Valve calibration can only be done using the AS400 (and not a LR410 or GPS) • May need to temporarily mag mount AS400 on blade

  18. Valve Calibration • Must be in Manager mode • Setup / Installation Menu / Valve Calibration • Select “Left” or “Right” valve

  19. Left Valve Calibration • A set of screens follow – perform the instructions

  20. Left Valve Calibration

  21. Left Valve Calibration

  22. Left Valve Calibration

  23. Left Valve Calibration

  24. Left Valve Calibration • Place in Auto • Press the Auto/Manual switch • System will then automatically move the blade and monitor the movement against the valve command

  25. Left Valve Calibration

  26. Left Valve Calibration

  27. Left Valve Calibration

  28. Right Valve Calibration • Process is similar to the “Left” calibration

  29. Right Valve Calibration

  30. Right Valve Calibration

  31. Right Valve Calibration

  32. Right Valve Calibration

  33. Right Valve Calibration

  34. Right Valve Calibration

  35. Right Valve Calibration

  36. Right Valve Calibration

  37. Questions?

More Related