1 / 32

Electricity

Electricity. Related Work Activities. Using power tools Digging, excavating and boring Exposure to overhead power lines Falling branches Utility line tree trimming services. Hazardous Conditions & Unsafe Acts. Wet skin or damp ground Defective tools, cords, and electrical installations

marsonj
Download Presentation

Electricity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electricity

  2. Related Work Activities • Using power tools • Digging, excavating and boring • Exposure to overhead power lines • Falling branches • Utility line tree trimming services

  3. Hazardous Conditions & Unsafe Acts • Wet skin or damp ground • Defective tools, cords, and electrical installations • Working near overhead lines • Digging near underground utilities • Taking electrical related risks • Not respecting the ability of electricity to kill

  4. Unsafe Work Practices can be Deadly!

  5. Potential Outcomes • What happens to you depends on how much, how long, and what part of your body the electricity goes through. • People have survived shocks of several thousand volts. • Others have been killed by voltages as low as 12 volts. • Prevention means not becoming part of the electrical flow.

  6. Non-Fatal Shocks can Result in Severe Burns

  7. OSHA Fatal Fact No. 57 • He received an electric shock that killed him. • Worker was climbing a metal ladder to hand an electric drill to a worker above him. • The extension cord had a missing grounding prong and that a conductor on the green grounding wire was making intermittent contact with the energizing black wire thereby energizing the entire length of the grounding wire and the drill's frame. • The drill was not double insulated.

  8. Electrical Shock • Helping An Electrical Shock Victim • Call for immediate help. • Disconnect or de-energize the circuit. • Do not try to remove the victim from the current source! • Touching the victim could cause you to be shocked as well.

  9. Path of Least Resistance • Grounding Electricity • If your body becomes part of the path, electricity will flow through it. • If that path is through vital organs like your heart and lungs you can die. • Grounding Electricity means creating an easy path for current that doesn’t include your body. Electricity always follows through the path of least resistance.

  10. For Your Safety • Grounding Electricity • Electrical power tools should have a true ground or be double insulated. • Never cut off the third ground prong or use equipment with one of the three prongs broken. • If you feel a tingling sensation while you are using a tool, stop using the tool immediately. Take it out of service!

  11. Danger! Missing Ground Prong

  12. No Third Prong Here Either, Due to an Unauthorized Repair. Do Not Use!

  13. For Your Safety-Continued • Grounding Electricity • Inspect wires and plugs on power tools before each use. • Replace damaged wires or plugs before using equipment. Do not splice wires or tape gashes. • Extension cords should be rated for outdoor commercial use. • Never leave a plug in a puddle or other collection of water.

  14. Danger! This Cord is Beyond Repair!

  15. Circuit Breakers • Protecting Equipment • Circuit breakers protect the wiring system from overloads. • If you become part of the circuit you may trip the breaker but it may be after a fatal amount of current flows through your body. • Circuit breakers do not protect people!

  16. Ground-Fault Circuit Interrupters (GFCI) • Protecting People • Are designed to keep workers from being electrocuted. • If there is a short, the GFCI will quickly shut down the circuit. • A GFCI can be hard wired into an electrical box. • A portable GFCI can be plugged into any electrical outlet to protect you.

  17. GFCIs • Portable GFCIs are common in landscaping • All extension cords must have a GFCI connected to them, including those running off of a generator.

  18. Additional Information • http://www.osha.gov/OshDoc/data_Hurricane_Facts/elect_safety.pdf • OSH Answers: Electrical Safety - Basic Information • OSH Answers: Electric Tools - Basic Safety

  19. Call Before You Dig • Failure to contact and locate utilities can lead to catastrophic events and large repair bills.

  20. Planning-Prior to Digging • CALL BEFORE YOU DIG • Use your local one call system. • All underground utilities should be located. • Once located, utilities must be protectedfrom damage.

  21. Overhead Electrical Hazards • Long, tall, or large equipment can come in contact with overhead power lines: • Ladders • Long-handled trim saws • Augers • Heavy equipment • Long poles or pipes

  22. Power Line Clearance Distance from Power Lines 10 feet 15 feet 20 feet 25 feet 30 feet 35 feet Voltages < 50 kV 200 kV 350 kV 500 kV 650 kV 800 kV

  23. Minimum Working Distances from Energized Conductors for Line-Clearance Tree-Trimmers

  24. OSHA Fatal Fact • Workers were constructing a chain link fence in front of a house and directly below a 7200-volt energized power line. • They were installing 21-foot sections of metal top rail on the fence. • One employee picked up a 21-foot section of top rail and held it up vertically. • The top rail contacted the 7200-volt line, and the employee was electrocuted.

  25. NIOSH Fatal Fact A landscaping crew felled a 65-foot oak tree, one of the branches caught onto the 69,000 volt power line. A landscaper was electrocuted and two workers seriously Injured

  26. Additional Information • http://www.osha.gov/OshDoc/data_General_Facts/downed_electrical_wires.pdf • http://www.osha.gov/OshDoc/data_Hurricane_Facts/electrical_safety.pdf • OSHA Construction eTool: Electrical Incidents • Face report - http://www.cdc.gov/niosh/face/stateface/ca/93ca006.html

  27. Material Handling and Storage Avoid Storing Materials Under Power Lines

  28. For Your Safety • A knowledgeable person should assess each work site for safety hazards and design a work plan that addresses those hazards. • The employer should conduct a job briefing, based on the work plan, before starting work. • The employer should establish a written safety and health policy. • Safe tree removal techniques should be used. • Employers should notify the utility company when work is planned in an area near overhead power lines. • Employers and employees should become familiar with available resources on safety standards and safe work practices.

  29. Remember These Important Points • Assume overhead power lines have no protective insulation and contact may be fatal. • Work as a team-One worker on the ground spots for the worker on raised equipment. • Electricity always seeks one or more paths of least resistance. • Never touch fallen overhead wires. • Notify the power company right away.

  30. Remember These Important Points • Check for overhead power lines before doing any work. • Plan your route of travel to avoid power lines. • Make sure equipment does not contact power lines.

  31. Most Important ! You, your equipment, and the materials you work with must stay at least 10 feet from power lines ! Note: Qualified line clearance tree-trimmers may follow rules which allow closer proximities.

More Related