1 / 59

Troubleshooting for the Non-technician

Troubleshooting for the Non-technician. Module Objectives. Identify common symptoms and problems associated with computer malfunctions. Isolate the source of problem through basic troubleshooting techniques. Identify care and service techniques and common problems with primary printer types.

marijke
Download Presentation

Troubleshooting for the Non-technician

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Troubleshootingfor theNon-technician

  2. Module Objectives • Identify common symptoms and problems associated with computer malfunctions. • Isolate the source of problem through basic troubleshooting techniques. • Identify care and service techniques and common problems with primary printer types. • Develop a preventive maintenance schedule for the computers in your classroom.

  3. Essential Questions • How have technical problems in the classroom limited your ability to teach with technology? • Is it appropriate to troubleshoot technical problems during class time? • Have you established a maintenance schedule for the computers in your classroom? • Are your students involved?

  4. Basic Troubleshooting Methodology • Zero in on an area. • Build a foundation. • Work up to the problem. • Repair/Replace. Zero In Build Foundation Work up to Problem Repair/ Replace

  5. The Dirty Dozen • Power • Connectivity • Boot Firmware • Memory Chips • Storage • I/O

  6. The Dirty Dozen (cont’d) • Operating System • Device Drivers/TSRs • Memory Management • Application Specific • Configure/Setup • Viruses

  7. Power The aspects that get electrical service to the devices that need them.

  8. What is under Power? • Electric company • Fuse box • Wiring • Plugs/Cords • Power supply • Connections to devices

  9. The Clues • Dead PC • Intermittent errors • Intermittent lockups • Device not working/ not found

  10. Connectivity The aspects that physically connects internal components and peripheral devices and allows for communication within a computer system.

  11. What is under Connectivity? • External cables • Internal cables • Properly seated cards • Properly seated memory chips and boards

  12. Connectivity • Electronic signals are sent from devices installed on a computer through internal and external cables . • External cables connect peripheral devices via a PORT.

  13. Connectivity Both the keyboard and mouse are connected directly to a computer system’s motherboard.

  14. Connectivity Ports • A PORT is similar to a telephone jack. It allows for two communication between a peripheral device and computer system. • Different types of PORTS are used to connect various peripheral devices: • Parallel ports transfers data over eight data lines simultaneously at speeds of 12,000 Kbps. • Primarily used to connect printers, scanners, and external drives, such as a Zip drive.

  15. Connectivity Ports (cont’d) • Serial Ports send data one bit at a time with maximum data transfer rate of 56 Kbps. • Primarily used to connect dial-up modems or a serial mouse. See the Resources more about serial ports and modems.

  16. Connectivity Ports (cont’d) Monitors connect to a graphics card via a video or VGA port. Check out the side-by-side graphic of a variety of different ports.

  17. Connectivity Ports (cont’d) Networked computers require an expansion card called a network interface card or NIC. Check the Resources for more on networking components.

  18. ConnectivityInternal Cables There are a variety of connections inside the box that are just as important! Great, look at the internal components of a computer system.

  19. ConnectivityInternal Cables The power supply inside the computer system box provides connections and power to all of the internal devices and components, i.e., motherboard, hard drive, and floppy drive.

  20. ConnectivityInternal Cables Different types of power supply connectors are used to connect different devices.

  21. The Clues • Device not working • Device not found • Intermittent errors on device

  22. Dust: Enemy #1 • Cleaning your mouse or track ball on a regular basis is important to maintain proper functioning. • The ball inside the mouse can be cleaned with soap and water. Find out more about cleaning your mouse and other components.

  23. Dust: Enemy #1 Found out more about how the mouse works and the different types available.

  24. More Mouse Tips • Click on Start button. • Point to Settings. • Click on Control Panel. • Double click on Mouse.

  25. Mouse Properties

  26. Boot Firmware The POST, BIOS routines, and CMOS settings and the chips that store them.

  27. What is underBoot Firmware? • Boot ROM • CMOS and CMOS settings • CMOS battery • Flash ROM

  28. Boot Firmware • POST – Power on Self Test. • Routine is run by computer system every time it boots up to test its ability to access internal components and devices. • Feedback is given to user through a series of beeps.

  29. The Clues • Dead PC • Consistent errors on POST • Beep errors • CMOS error • Core devices: error on boot • RAM • Hard drive • Floppy drive • Video

  30. Memory Chips The DRAM and SRAM chips as well as the jumper and CMOS settings that support memory.

  31. What is underMemory Chips? • Proper type of RAM • Proper setup of RAM • RAM CMOS settings • Motherboard jumpers

  32. The Clues • Dead PC • Parity errors • Page Faults with consistent memory addresses • HIMEM.SYS errors

  33. Memory Management Organizing and optimizing the use of memory.

  34. What is underMemory Management? • Himem.sys • EMM386.exe • MSDOS.sys option (Win95 only) • SYSTEM.INI / WIN.INI • Virtual memory • Window’s resource usage • UMB management

  35. The Clues • Errors with “Not enough memory? • Missing XMS, EMS memory • Device lockups • GPFs at KRNL386.EXE • GPFs at USER.EXE or GDI.EXE

  36. Device Drivers • Device drivers and their configuration. • Device drivers are software that enable an operating system to control a peripheral device.

  37. What is underDevice Drivers? • All device drivers must be referenced in config.sys, system.ini or the registry. • Proper versions. • Driver must correspond to correct peripheral device and correct operating system. • New drivers are usually available on support or download page from manufacturer’s website. • Proper configuration.

  38. The Clues • Device locks up on access • Intermittent lockups • Consistent lockup at CONFIG.SYS or AUTOEXEC.BAT • Safe Mode

  39. Input / Output The aspects which allow devices to speak to each other.

  40. What is under Input/Output? • IRQ settings • I/O address settings • DMA settings • Serial port settings • Parallel port settings • Any card jumpers/ switches

  41. Printer Output • Is your printer turned on? • Is the correct version of the device driver installed? • Common problem if you move printer between different computers. • Check manufacturer’s website for Frequently Asked Questions or FAQ’s for help in troubleshooting specific models.

  42. Printer Output • Problems inherent to inkjet or bubble jet printers. • Dried up ink cartridges. • One color used up in tri-color cartridge. • When shades of one color will not print • Large capacity cartridges available

  43. Printer Output More problems with inkjet printers • Head alignment. • Printer should come with software that can fix some alignment problems. Try this first! • Next stop - the printer technician.

  44. Printer Output Laser Printers • Many mechanisms for printing with a laser printer are housed within the print cartridge. • Try changing the cartridge first! • Laser printers are rated by how many pages each cartridge will print.

  45. The Clues • System lockups • Device not responding • Bizarre behavior from devices

  46. Maintenance • System tools for Windows based PCs. • ScanDisk • Disk Defragmenter • Disk Cleanup • These tools should be used as part of a regular maintenance program to keep your system running at optimum levels.

  47. Maintenance • All of these utilities can be opened from the Start menu. • Click on START. • Point to Programs. • Point to Accessories. • Point to System Tools.

  48. Maintenance 18:20.0

  49. Maintenance ScanDisk • A utility program that will check the hard disk drive for errors. • Tries to fix “bad sector” problems on hard drive. • May fix corrupted files. • May fix file linking errors.

  50. Maintenance Disk Defragmenter • As you create and store files or install programs to a drive, the data is written to the next available cluster on the storage device. • Clusters are rarely contiguous resulting in file fragments being stored in various clusters. An article with examples of a fragmented disk is in Resources.

More Related