1 / 24

Advection-Dispersion Equation (ADE)

Advection-Dispersion Equation (ADE). Assumptions. Equivalent porous medium (epm) (i.e., a medium with connected pore space or a densely fractured medium with a single network of connected fractures). Miscible flow (i.e., solutes dissolve in water; DNAPL’s and

margie
Download Presentation

Advection-Dispersion Equation (ADE)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Advection-Dispersion Equation (ADE) Assumptions • Equivalent porous medium (epm) • (i.e., a medium with connected pore space • or a densely fractured medium with a single • network of connected fractures) • Miscible flow • (i.e., solutes dissolve in water; DNAPL’s and • LNAPL’s require a different governing equation. • See p. 472, note 15.5, in Zheng and Bennett.) 3. No density effects (density dependent flow requires a different governing equation, Z&B, Ch. 15)

  2. Dual Domain Models Fractured Rock Heterogeneous porous media Note the presence of “mobile” domains (fractures/high K units) and “immobile” domains (matrix/low K units) Each domain has a different porosity such that:  = m + im Z&B Fig. 3.25

  3. mass transfer rate between the 2 domains Governing Equations – no sorption Immobile domain Note: model allows for a different porosity for each domain  = m + im

  4. (MT3DMS manual, p. 2-14)

  5. Sensitivity to the mass transfer rate Sensitivity to the porosity ratio Z&B, Fig. 3.26

  6. Sensitivity to Dispersivity Dual domain model Advection-dispersion model

  7. Governing Equations – with linear sorption

  8. Dual Domain/Dual Porosity Models Summary Mass transfer rate Porosities “New” Parameters Porosities in each domain: m ; im ( = m + im) Mass transfer rate:  Fraction of sorption sites: f = m /  (hard-wired into MT3DMS) Treated as calibration parameters

  9. Shapiro (2001) WRR Tracer results in fractured rock at Mirror Lake, NH

  10. MADE-2 Tracer Test Injection Site

  11. Advection-dispersion model (One porosity value for entire model) kriged hydraulic conductivity field stochastic hydraulic conductivity field Observed

  12. Dual domain model with a kriged hydraulic conductivity field Observed

  13. Dual domain model with a stochastic hydraulic conductivity field Observed

  14. Feehley & Zheng, 2000, WRR Results with a stochastic K field

  15. Feehley & Zheng (2000) WRR

  16. Statistical model of geologic facies with dispersivity values representative of micro scale dispersion Ways to handle unmodeled heterogeneity • Large dispersivity values • Stochastic hydraulic conductivity field and “small” • macro dispersivity values • Stochastic hydraulic conductivity field with even • smaller macro dispersivity values & dual domain porosity • and mass exchange between domains Alternatively, you can model all the relevant heterogeneity

  17. Stochastic GWV

  18. Stochastic GWV

More Related