1 / 30

Recent R&D at Nagoya univ.

Recent R&D at Nagoya univ. Prototype development & Beam test results Photon detector R&D Simulation study. K. Inami (Nagoya university). TOP counter. Position+Time. Linear array PMT (~5mm) Time resolution s ~40ps. Simulation 2GeV/c, q =90 deg. ~2m. ~200ps. K p.

manthey
Download Presentation

Recent R&D at Nagoya univ.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Recent R&D at Nagoya univ. • Prototype development & • Beam test results • Photon detector R&D • Simulation study K. Inami (Nagoya university)

  2. TOP counter • Position+Time Linear array PMT (~5mm) Time resolution s~40ps Simulation 2GeV/c, q=90 deg. ~2m ~200ps K p Different opening angle for the same momentum  Different propagation length(= propagation time) + TOF from IP works additively. 2009/3/17-19

  3. TOP counter • Quartz: 255cmL x 40cmW x 2cmT • Focus mirror at 47.8deg. to reduce chromatic dispersion • Multi-anode MCP-PMT • Linear array (5mm pitch), Good time resolution (<~40ps) •  Measure Cherenkov ring image with timing information MCP-PMT 2009/3/17-19

  4. Prototype development • Demonstration of the performance Glued Glued 915mm 915mm PMT 400mm 400mm 400mm quartz quartz 20mm 20mm 20mm Prototype overview Photon detector 　・Time resolution 　・Efficiency Quartz radiator (Fused silica) 　・Flatness:<1.2mm/m 　・Roughness:0.5nm Filter (l>400nm) 　・Suppression of chromatic dispersion 2009/3/17-19

  5. AMP+CFD amp comparator to TDC to ADC input low voltage supply PMT module • MCP-PMT + readout • HV divider + AMP + Discriminator • Small size (28mmW) • Prototype • Fast AMP (MMIC, 1GHz, x20) • Fast comparator (180ps propagation) • CFD with pattern delay • Performance • Test pulse • ~5ps resolution • MCP-PMT • s<40ps • Working well 2009/3/17-19

  6. MCP-PMT Line 1 Line 2 Line 3 Quartz s<40ps Time resolution [ps] Propagation length [mm] Quartz radiator • Check the quality for time resolution • Single photon pulse laser • l=407nm • MCP-PMT • Several incident position •  No degradation of time resolution • Enough quartz quality MCP-PMT 47.2 deg. 2009/3/17-19

  7. Range of detectable wavelength of Cherenkov photons  Time fluctuation of the Cherenkov ring image  Depends on the propagation length. Light propagation velocity inside quartz QE [%] Wavelength [nm] Chromatic dispersion effect Variation of propagation velocity depending on the wavelength of Cherenkov photons 2009/3/17-19

  8. TOP counter Quartz bar (1850×400×20mm) Timing counter 10mmf quartz + MCP-PMT st0 < 15ps MWPC 1 MWPC 2 Trigger counter MCP-PMT (56ch) Lead glass + Finemesh PMT Quartz + support jig Beam test • At Fuji beam line in June and Dec. • Using real size quartz and MCP-PMT • MCP-PMT: Multi-alkali p.c., C.E.=60% • Check • Ring image • Number of photons • Time resolution 2009/3/17-19

  9. quartz (4) Beam 915mm (2) (1) 358mm Data Simulation (4) (3) (2) TDC [1count/25ps] TDC [1count/25ps] (1) ch ch Ring image • Proper ring image • Same time interval with simulation 2009/3/17-19

  10. Number of detected photons • Normal incidence (90 deg.) • Obtained number of photons as expected •  We can expect ~22 photons/event, if we use 14 PMTs. • Normalized by active area (1014 PMTs) Ave. num. of photons:15.7 Num. of photons 2009/3/17-19

  11. Focus mirror quartz Beam (875mm) ch29 1850mm [1count/25ps] [1count/25ps] 3rd 2nd 875mm 1st MCP-PMT(ch29) Time resolution • TDC distribution of ch.29 • Compare with the distribution expected by a simulation including PMT resolution and chromatic dispersion effect 1st 3rd 3rd 1st 2nd 2nd Simulation Data 2009/3/17-19

  12. Simulation Time resolution [ps] Propagation length [mm] Time resol. vs. propagation length • Check time resolution • For several incidence condition and channel • Data agrees well with simulation expectation.  Confirmed the level of chromatic dispersion effect 2009/3/17-19

  13. Photon detector R&D • Square-shape multi-anode MCP-PMT • Multi-alkali photo-cathode • Gain=1.5x106 @B=1.5T • T.T.S.(single photon): ~35ps @B=1.5T • Position resolution: <5mm • Semi-mass-production (14 PMTs) QE [%] σ=34.2±0.4ps QE：24%@400nm TDC [1count/25ps] Wavelength [nm] TTS＜40ps for all channels Ave. QE：17%@400nm 2009/3/17-19

  14. QE before againg Lifetime issue • Lifetime test • Multi-alkali p.c. with Al protection • With square-shape MCP-PMT •  Short lifetime,position dependence • Difference with round-shape PMT • Enough lifetime (>10 super-B year) • Need to confirm the lifetime of round-shape MCP-PMT • Need to confirm the difference • Internal structure QE after againg 2009/3/17-19

  15. Lifetime with round shape • MCP with 10mm pore • Multi-alkali p.c. • Aluminum protection on 1st MCP • Initial Q.E.; 20% at 400nm • Initial Gain; 4x106 • TTS keeps <40ps. • Need to improve for initial Q.E. and initial aging • Slope seems to be manageable. • Can expect to improve during R&D in next year Relative QE ? Relative Gain ~3 super-B years Output charge (mC/cm2) 2009/3/17-19

  16. R&D status • Multi-alkali p.c. SL10 • Added ceramic shield • To protect gas feedback •  Improved lifetime • Obtained normal Gain and TTS • Still need to irradiate more photons and study detail • Need to improve correction efficiency (~35%  ~60%) • Put Al protection layer on 2nd MCP •  Deliver April and May • GaAsP p.c. SL10 • Change the process method • To improve yield rate • Will add ceramic shield Preliminary result from HPK New Old 2009/3/17-19

  17. Summary • Prototype development • PMT module with multi-anode MCP-PMT • Integrated module with amplifier and CFD • Quartz radiator • Enough quartz quality for single photon detection • Performance test with beam • Proper ring image, number of detected photons (15.7 photons) • Time resolution as expected by simulation Confirmed chromatic dispersion effect • MCP-PMT R&D • 14 prototype PMTs show enough performance • TTS < 40ps for single photon for all channels • Lifetime tests • Round shape MCP-PMT shows manageable lifetime. • Square shape MCP-PMT • Improved lifetime with additional ceramic protection • Still need production R&D • GaAsP p.c. / Multi-alkali p.c. + CE=60% 2009/3/17-19

  18. Design study 2009/3/17-19

  19. Performance • Full simulation with • GaAsP photo-cathode + Focusing mirror • >400nm filter, CE=35% 2009/3/17-19

  20. Performance • GaAsP, Focusing mirror, 10ps jitter for T0 • >400nm filter, CE=35% 2009/3/17-19

  21. Performance • GaAsP, CE=35%, l>400nm 10ps jitter 2009/3/17-19

  22. Performance With 10ps jitter • GaAsP, CE=35% • l>400nm • Multi-alkali, CE=60% • l>350nm 2009/3/17-19

  23. Design study summary • TOP performance for several condition • Two readout type • Multi-alkali p.c. 2~3% fake-rate for 3~4GeV/c • GaAsP p.c. <2% • Start time fluctuation (10ps) 5% for forward part • One readout type • GaAsP p.c. 3~4% • Multi-alkali p.c. 7~10% • Depends on the photon detector • GaAsP p.c.  Both type OK, (2 bar or 1 bar+block) • Multi-alkali p.c.  2 bar 2009/3/17-19

  24. Backup 2009/3/17-19

  25. Performance • Multi-alkali, Focusing mirror, 10ps jitter for T0 • >350nm filter, CE=60% 2009/3/17-19

  26. Performance • Single readout type • GaAsP, Focusing mirror (R=7m),10ps jitter for T0 • >400nm filter, CE=35%, 4x4 anode 2009/3/17-19

  27. Performance • Single readout type • GaAsP, Focusing mirror (R=7m),10ps jitter for T0 • >400nm filter, CE=35%, 1x4 anode 2009/3/17-19

  28. Performance • Single readout type • GaAsP, Focusing mirror (R=7m),10ps jitter for T0 • >400nm filter, CE=35%, 1x4 anode, block 2009/3/17-19

  29. Performance • Single readout type • Multi-alkali, Focusing mirror (R=7m), 10ps jitter for T0 • >400nm filter, CE=60%, 1x4 anode 2009/3/17-19

  30. Performance • Focusing • Multi-alkali photo-cathode + >350mm filter, CE=60% 2009/3/17-19

More Related