1 / 13

Lecture Objectives:

Lecture Objectives:. Learn about Chiller modeling Water energy storage models. Modeling of Water Cooled Chiller. (COP=Q cooling /P electric ). Chiller model:. COP= f(T CWS , T CTS , Q cooling , chiller properties). Modeling of Water Cooled Chiller. Chiller model:.

mahsa
Download Presentation

Lecture Objectives:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture Objectives: • Learn about • Chiller modeling • Water energy storage models

  2. Modeling of Water Cooled Chiller (COP=Qcooling/Pelectric) Chiller model: COP= f(TCWS , TCTS , Qcooling , chiller properties)

  3. Modeling of Water Cooled Chiller Chiller model: Chiller data: QNOMINAL nominal cooling power, PNOMINAL electric consumption forQNOMINAL Available capacity as function of evaporator and condenser temperature Cooling tower supply Cooling water supply Full load efficiency as function of condenser and evaporator temperature Efficiency as function of percentage of load Part load: The consumed electric power [KW] under any condition of load The coefiecnt of performance under any condition Reading: http://apps1.eere.energy.gov/buildings/energyplus/pdfs/engineeringreference.pdf page 597.

  4. Combining Chiller and Cooling Tower Models Function of TCTS 3 equations from previous slide Add your equation for TCTS → 4 equation with 4 unknowns (you will need to calculate R based on water flow in the cooling tower loop)

  5. Merging Two Models Temperature difference: R= TCTR -TCTS Model: Link between the chiller and tower models is the Q released on the condenser: Q condenser = Qcooling + Pcompressor ) - First law of Thermodynamics Q condenser = (mcp)water form tower (TCTR-TCTS) m cooling tower is given - property of a tower TCTR= TCTS - Q condenser / (mcp)water Finally: Find P() or The only fixed variable is TCWS = 5C (38F) and Pnominal and Qnominal for a chiller (defined in nominal operation condition: TCST and TCSW); Based on Q() and WBT you can find P() and COP().

  6. Low Order Building Modeling Measured data or Detailed modeling Find Q() = f (DBT)

  7. For HW3a (variable sped pump efficiency) you will need Q() 20 16 12 Q [ton] Yearly based analysis: You will need Q() for 365 days x 24 hours Use simple molded below and the Syracuse, NY TMY weather file posted in the course handout section 8 Q=--27.48+0.5152*t 4 Q=-0.45 +0.0448*t 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 t [F] TMY 3 for Syracuse, NY http://rredc.nrel.gov/solar/old_data/nsrdb/1991-2005/tmy3/by_state_and_city.html

  8. For Austin’s Office Building Model: (Area = 125,000sf) Hours in a year kW Used for component capacity analysis Model =0 when building is off Reading assignment: http://www.taylor-engineering.com/downloads/cooltools/EDR_DesignGuidelines_CoolToolsChilledWater.pdf Chapter: 2 Number of hours

  9. Modeling of chilled water tank(stratified vs. mixing) To chiller From building Stratification To building From chiller Mixing happens if the supply temperature vary Mixing model: mcpDT/D = Qin –  Qout

  10. Stratification Dr. Jing Song’s PhD results Flow time at 20 minutes CFD domain Flow time at 1 minute

  11. Stratified model(simplified) However even if the chiller supply constant T the return water from building is not constant! From building To chiller T1 T2 Building Building T3 Tn To building From chiller For a constant T supply it is a very simple model chiller chiller Model details in “Solar Engineering of Thermal Process”

  12. Tank model Flow indicator: Building Building Flow for each node: Energy balance: chiller chiller

  13. HW 4 Model a Chiller coupled with the Cooling Tower (from HW3) and plumbing and pump System from HW3 for the building in Syracuse (from HW3) Chiller model coefficients: ……… Provided in the Handout section of the course website

More Related