1 / 30

By: Other AuTHORS :

The Impact of The Input Energy on The SOA Gain with Non-uniform Biasing. By: Other AuTHORS :. Ahmed Abd El Aziz Shalaby. Dr. Wai Pang Ng Prof. Zabih Ghassemlooy Prof. Moustafa Hussien (Arab Academy for Science and Technology, Egypt) Dr. Razali Ngah

lyndon
Download Presentation

By: Other AuTHORS :

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Impact of The Input Energy on The SOA Gain with Non-uniform Biasing By: Other AuTHORS: Ahmed Abd El Aziz Shalaby Dr. Wai Pang Ng Prof. Zabih Ghassemlooy Prof. Moustafa Hussien (Arab Academy for Science and Technology, Egypt) Dr. RazaliNgah (UniversitiTeknologi, Malaysia)

  2. Presentation Outline • Introduction • All-optical packet switching • All-optical router • Mach-Zehnder Interformeter(MZI) • SOA structure • Problem • Proposed • Our proposal

  3. Presentation Outline • Segmentisation model • Uniform biasing • Non-uniform biasing • Triangular bias current • Sawtooth bias current • Comparison between uniform and non-uniform biasing techniques • Conclusions

  4. Introduction

  5. All-optical packet switching

  6. All-optical router

  7. Mach-Zehnder Interformeter (MZI)

  8. Mach-Zehnder Interformeter (MZI) Symmetric Mach-Zehnder (SMZ)

  9. Mach-Zehnder Interformeter (MZI) • Advantages of SMZ • Narrow and square switching window • Compact size • Thermal stability and low power operation • High integration potential • Strong nonlinearity characteristics

  10. Output signals Injection current (I) Output facet L Input facet of active region Input signals SOA structure w H

  11. SOA structure

  12. Problem • For high-speed applications, the SOA must have a fast gain recovery time to avoid system penalties arising from bit pattern dependencies. The gain recovery of the conventional SOAs is limited by the long carrier-recovery time.

  13. Proposed • The slow gain recovery can be improved by increasing the injected bias current, the device length or by changing the pulse width (input energy) of the input signal [5]. Several research groups have reported theoretical and experimental results on externally injected SOAs (assist light or holding beam ) [6,7].

  14. Our proposal • Novel non-uniform bias current techniques are injected to the SOA in order to achieve a linear output gain compared to the uniform biasing for ultra-high speed routers.

  15. Segmentisation Model

  16. Segmentisation model of the SOA t=0 t=l/vg t=L/vg Ni input signal output signal N(1) N(5)

  17. Uniform Biasing

  18. Uniform Biasing • Normalized SOA gain response to single (doted) and multiple (solid) input pulses.

  19. Uniform Biasing • Normalized output gain achieved by successive input pulses.

  20. Non-uniform Biasing

  21. Non-uniform Biasing • Sawtooth (doted) and triangular (solid) bias currents.

  22. Triangular bias current • Normalized SOA gain response to multiple of input pulses using triangular bias current.

  23. Triangular bias current • Normalized output gain achieved by successive input pulses using triangular bias current as a ratio of uniform bias current.

  24. Sawtooth bias current • Normalized SOA gain response to multiple of input pulses using sawtooth bias current.

  25. Sawtooth bias current • Normalized output gain achieved by successive input pulses using sawtooth bias current as a ratio of uniform bias current.

  26. Comparing uniform and non-uniform biasing • Gain standard deviation against the input signal energy for uniform (dot-dashed), sawtooth (doted) and triangular (solid) biasing for a range of data rates.

  27. Comparing uniform and non-uniform biasing • Improvement of the gain standard deviation upon uniform biasing • For sawtooth bias current: • at 10 Gbps 3.25 dB • at 20 Gbps 0.51 dB • at 40 Gbps min improvement • For triangular bias current: • at 10 Gbps 2.4 dB • at 20 Gbps 0.4 dB • at 40 Gbps min improvement

  28. Gain standard deviation against the average sawtooth bias current for 1 fJ input signal energy.

  29. Conclusions • We have proposed novel techniques to bias the SOA. • The total gain response of a segmentized SOA model is simulated. • We have investigated applying triangular and sawtooth biasing shapes in order to optimize the gain standard deviation for data rates of 10, 20 and 40 Gbps. • Results showed an enhancement to the gain uniformity achieved using non-uniform biasing, especially sawtooth biasing. • The impact of the input pulse energy on the gain standard deviation and the output gain for all biasing techniques are investigated. • The impact of the average bias current used on the gain uniformity is presented.

  30. Thank you

More Related