1 / 7

Self study lesson 2 assignment 1

Self study lesson 2 assignment 1. Prepare a presentation for 5-10 minutes about the subject I/O port. Explain in detail how to use a typical I/O port works in digital mode. What you need to study?. At least:

lucky
Download Presentation

Self study lesson 2 assignment 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Self study lesson 2assignment 1 Prepare a presentation for 5-10 minutes about the subject I/O port. Explain in detail how to use a typical I/O port works in digital mode.

  2. What you need to study? At least: • The general architecture of the PCI controller.See also lesson 1 and the Microchip tutorial. • Reference Manuals for the mid-range MCU FamilySection 9=> study 9.1, 9.2, 9.10, 9.11, 9.12 • Data sheet PIC16F684=>study 4.0, 4.1You are using the C-language, so it is not necessary to understand the macro instruction in detail.

  3. Include in your presentation at least the next subjects • Roll of the Data bus. • Roll of WR PORT (PORTA register) • Roll of WR TRIS (TRISA register) • Roll of RD PORT (PORTA register) • Explain the timing

  4. From Reference Manuals for the mid-range MCU Family(document 33023a)

  5. Self study lesson 2assignment 2 Prepare a presentation for 5 minutes about the subject PICkit board LED’s. Explain in detail how to control these LED’s.

  6. Include in your presentation at least the next subjects • A pin can be in: • Low impedance high (5V) • Low impedance low (5V) • Tri state • Discuss the conditions under which the LED’s are burning and with what intensity. Remarks: • D8-D11 not mounted

More Related