1 / 14

PHENIX Silicon Vertex Tracker

PHENIX Silicon Vertex Tracker. PHENIX Silicon Vertex Tracker. Mechanical Requirements Stability requirement, short and long 25 µm Low radiation length <0.5% Low CTE High stiffness-to-weight ratio Room temperature operation -- desirable Cooling – H2O desirable

lilac
Download Presentation

PHENIX Silicon Vertex Tracker

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PHENIX Silicon Vertex Tracker

  2. PHENIX Silicon Vertex Tracker Mechanical Requirements Stability requirement, short and long 25 µm Low radiation length <0.5% Low CTE High stiffness-to-weight ratio Room temperature operation -- desirable Cooling – H2O desirable Kinematically mounted off Central Magnet

  3. PHENIX Silicon Vertex Tracker Mechanical Specifications Central Barrel layer radius 2.5,6,8,10 cm layer length 30 cm pixel size 50 μm x 425 μm strips 80 μm x 3cm pixels( 1st layer) ~1.9M strips(2,3,4 layer) ~165k azimuthal coverage 320 deg End caps(each) inner radius 2.5 cm outer radius 18cm disk z position(at z= 2.5cm) 20,26,32,38 cm pixel size 50 μm x 4 mm total pixels ~2.0M azimuthal coverage 360 deg

  4. PHENIX Silicon Vertex Tracker Simulated Performance Barrel occupancy 1st layer 1% 2nd layer 11.5% 3rd layer 7.2% 4th layer 4.8% resolution DCA <100 µm Endcaps occupancy all disks <3% resolution <100 µm

  5. PHENIX Silicon Vertex Tracker Integration Designed to coexist with TPC < 20 cm radius. Clam shell design to fit around beam pipe. Radiation length ~ 1% per layer goal Barrel and end cap sections are separate units ( i.e. ATLAS type) Staging Option 1 Phase One --year 1 Design for barrel with strips first – no pixels or end caps Phase Two - after year 1 Second design for complete barrel and end caps Option 2 Design for barrel with option to add pixels, add end caps later

  6. u u x x Silicon Strip Sensor N-type single-sided strip sensor developed by BNL (Z. Li) • Thickness : 400um (0.43 % X0), 250um (0.26% X0) for mass prod. • Size : 3cm*6cm, Pitch : 80um, 2-dim readout : x- and u-direction • #ch per sensor : 384 ch/dir * 4 dir =1536 ch Drawn by Yuji Goto

  7. Prototype Sensor Module Prototype module development is on going. • Performance of the sensor will be tested w/ cosmic ray and beam at KEK. • Readout chip : VA2 (Viking 128 ch CMOS, analog multiplexer, 1us peaking time) Only this Draft

  8. Toward Ladder Structurein Vertex Tracker • Barrel layer length: ~30cm • #chip : 12 readout chip/sensor • #sensor : 4 or 5 sensor/ladder • Cooling : dependent on readout chip Ex. SVX3D : 3.5mW/ch * 128ch/chip * 60sensor/ladder = 27 W/ladder Liquid cooling will be required. • Cabling : Cu(Al) / Polyimide hybrid for low material budget • Ladder material : ex. CFRP (Carbon Reinforced Polymer) • Total material budget goal : 1% X0 per layer

  9. Mock-up of Barrel Support StructureMaterial : CFRP (Carbon-Fiber Reinforced Polymer) Precision, strength, deformation and material budget will be measured. Pictures and drawings : http://rarfaxp.riken.go.jp/~tojo/20020729/mockup20020729.htm

  10. 0 cm 50 ATLAS Vertex Detector • Support and cooling structures for ATLAS vertex detectors • Thermo-mechanical design • dimensional stability, low Z, high stiffness, heat removal capacity disks (10) center frame section end section (2) interior barrel layers internal end-cone (2) B-layer services

  11. Prototype Frame During Fabrication Finished Prototype ATLAS: Support Frame • Support Frame End Section • All GFRP Construction • XN80/CE Facings • XN50/CE Honeycomb • High dimensional accuracy (<.001”) Load Test (Prism)

  12. all carbon-carbon tube ~3.2 mm ID 0.25 mm wall thickness 10 cm 0 ATLAS: Silicon Detector Backplanes • Pixel detector support & cooling • Extreme stability ( < 10 µm @ -15ºC) • High heat flux (10,000 W/m2), active cooling circuit • Low mass ( < 2 kg/m2) • High stiffness ( > 100 Hz) tube extensions mounting points facing overhang

  13. PHENIX Silicon Vertex Tracker

  14. PHENIX Silicon Vertex Tracker

More Related