1 / 1

molten slag application bucket lip 2 x24 x156

liam
Download Presentation

molten slag application bucket lip 2 x24 x156

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Molten Slag ApplicationBucket lip 2”X24”X156” Tube City-IMS Cayce, SC uses a modified Cat 972 loader to dig molten (plastic) slag from the furnace pit at CMC Steel. Bucket lip weight is 2,100 # Previous materials used for lips include: Carbon and AR400 plate last about 1 month Tribraze with tungsten carbide crystal strips (TiCo) last about 3 months (900 hours) and cost $4,486. AST8000 with two 1” strips of tungsten carbide crystals has lasted 6 months + COST $3,637. Lip was changed at approximately 9 months

More Related