1 / 14

Electrical System Design and Basic Control with Simulink

Electrical System Design and Basic Control with Simulink. IEEE student board – IEEE PELS/IAS joint chapter Author: Elisabeth Vandeventer. Outline. Introduction to the project Development of a simple wind turbine model Presentation of the load and grid models

letham
Download Presentation

Electrical System Design and Basic Control with Simulink

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electrical System Design and Basic Control with Simulink IEEE student board – IEEE PELS/IAS joint chapter Author: Elisabeth Vandeventer

  2. Outline • Introduction to the project • Development of a simple wind turbine model • Presentation of the load and grid models • Interconnection of the network elements • Implementation of secondary source and storage • Assignment

  3. Introduction to the project • Experimental network for isolated village • 100 households, cold climate; • Windy area, river nearby Your goal: Design a control system to regulate the power flow in the network and make it stand-alone Your power sources: • Primary: 60kW wind turbine • Secondary: hydropower turbine located on the river • Storage: battery bank

  4. Simple wind turbine model • 60kW wind turbine • Power curve from provider • Steady-state values  need to make it dynamic • Addition of inertia time constant: • Final model http://www.icrepq.com/icrepq07/361-gonzalez.pdf

  5. Load model • Dynamic three-phase load • Input: PQ • Connect to the three phase grid

  6. Infinite grid representation • Three phase, 230Vrms line-to-line • Ideal representation:

  7. Interconnection of the blocks • Use of an idealistic converter: use source output power as input and transforms it into 3 phase current waveforms

  8. Power flow • Primary source uncontrollable • Infinite grid needs to provide power • System is not stand-alone! • Need addition of: • Controllable secondary source: hydropower turbine • Electricity storage: battery bank

  9. Hydropower turbine • Mathematical model: • Addition of inertia time constant , maximum power output (saturation) and valve control • Output power sent to ideal converter for connection to the grid • Controlled through the use of the valve

  10. Battery bank • Available in SimPowerSystems library • Charged/discharged with CCS • Monitoring State Of Charge for control • Use to send to converter and connect to the grid

  11. Assignment – goal • Your goal: (close to) no exchanged power with the grid • How to achieve that: • Resize the secondary source and battery bank • Write a clever control scheme that will handle the power flow

  12. Assignment – input and outputs • Inputs to the model: • Load profile • Wind profile • Constant water flow • Quantities to visualize: • Wind power • Hydro power • Load consumption • Battery SOC • Power exchange with the grid

  13. Assignment – control signals • Wind power  uncontrollable • Hydropower turbine • Monitor: output power • Control with: valve opening • Battery: • Monitor: state of charge • Control with: power to inject/draw • Infinite grid: power exchange occurs automatically to ensure power balance (nothing to do)

  14. Assignment – sources parameters • Wind turbine: • Spec sheet: NPS 60-24 • Inertia time constant: • Hydropower turbine: • Battery bank • Type: lead-acid • Initial SOC: 50% • Min/max SOC: 15-95% • Response time: 1s • Discharge currents:[6.5 13 32.5] • Rated capacity: 16kAh • Warning: parameters in red might need to change GOOD LUCK!

More Related