1 / 52

Techno-economic aspects of power systems

1. Techno-economic aspects of power systems. Ronnie Belmans Dirk Van Hertem Stijn Cole. Lesson 1: Liberalization Lesson 2: Players, Functions and Tasks Lesson 3: Markets Lesson 4: Present generation park Lesson 5: Future generation park Lesson 6: Introduction to power systems

Download Presentation

Techno-economic aspects of power systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TITRE PRESENTATION 1

  2. Techno-economic aspects of power systems Ronnie Belmans Dirk Van Hertem Stijn Cole

  3. Lesson 1: Liberalization • Lesson 2: Players, Functions and Tasks • Lesson 3: Markets • Lesson 4: Present generation park • Lesson 5: Future generation park • Lesson 6: Introduction to power systems • Lesson 7: Power system analysis and control • Lesson 8: Power system dynamics and security • Lesson 9: Future grid technologies: FACTS and HVDC • Lesson 10: Distributed generation

  4. Overview • Power system control • Why? • How? • FACTS • Voltage control • Angle control • Impedance control • Combination • HVDC • Classic • Voltage source converter based

  5. Power transfer through a lineHow? • Active power transfer: • Phase angle • Problems with long distance transport • Phase angle differences have to be limited • Power transfer ==> power losses • Reactive power transfer • Voltage amplitude • Problems: • Voltage has to remain within limits • Only locally controlled By changing voltage, impedance or phase angle, the power flow can be altered ==> FACTS

  6. Power transfer through a lineTheory Power transfer through a line:

  7. NL UK 34 % B 34 % D 35 % 20 % 11 % 8 % 18 % F CH A 13 % 10 % 3 % I E European power flowstransport France ==> Germany

  8. Overview • Power system control • Why? • How? • FACTS • Voltage control • Angle control • Impedance control • Combination • HVDC • Classic • Voltage source converter based

  9. Application • Voltage magnitude control • Phase angle control • Impedance • Combination of the above Divisions within FACTS • Implementation • Series • Shunt • Combined • HVDC • Energy storage • Yes or no • Switching technology • Mechanical • Thyristor • IGBT/GTO: Voltage Source Converter

  10. Application domain FACTS Transmission level • Power flow control • Regulation of slow power flow variations • Voltage regulation • Local control of voltage profile • Power system stability improvement • Angle stability • Caused by large and/or small perturbations • Voltage stability • Short and long term

  11. Application domain FACTS Distribution level • Quality improvement of the delivered voltage to sensitive loads • Voltage drops • Overvoltages • Harmonic disturbances • Unbalanced 3-phase voltages • Reduction of power quality interferences • Current harmonics • Unbalanced current flows • High reactive power usage • Flicker caused by power usage fluctuations • Improvement of distribution system functioning • Power factor improvement, voltage control, soft start,...

  12. Voltage magnitude adjustment

  13. Different configurations: • Thyristor Controlled Reactor (TCR) • Thyristor Switched Capacitor (TSC) • Thyristor Switched Reactor (TSR) • Mechanical Switched Capacitor (MSC) • Mechanical Switched Reactor (MSR) • Often a combination Static Var Compensation - SVC • Variable thyristor controlled shunt impedance • Variable reactive power source • Provides ancillary services • Maintains a smooth voltage profile • Increases transfer capability • Reduces losses • Mitigates active power oscillations • Controls dynamic voltage swings under various system conditions

  14. STATic COMpensatorSTATCOM • Shunt voltage injection • Voltage Source Convertor (VSC) • Low harmonic content • Very fast switching • More expensive than SVC • Energy storage? (SMES, supercap)

  15. Price comparison voltage regulation • Cost of voltage regulation capabilities dependent on: • Speed • Continuous or discrete regulation • Control application • 300 MVAr – 150 kV • Capacitor banks: 6 M€ (min) • SVC: 9 à 17 M€ (# periods) • Statcom: 31 M€ (ms)

  16. Phase shifting transformer Voltage angle adjustment.

  17. Phase shifting transformer • Allows for some control over active power flows • Mechanically switched ==> minutes

  18. D U 25 ° ==> 10 % voltage rise ==> 40 kV @ 400 kV Phase shifting transformer (II)Principles • Injection of a voltage in quadrature of the phase voltage • One active part or two active parts Asymmetric Symmetric

  19. 3' 1' 2' 3 3' 1 2 1 2 3 Phase shifting transformer (III) One active part • Series voltage injection • In quadrature to the phase voltage • One active part: low power/low voltage (high shortcircuit currents at low angle) Voltages over coils on the same transformer leg are in phase

  20. Phase shifting transformerRegulating • Changing injected voltage: • Tap changing transformer • Slow changing of tap position: ½ min • Control of the injected voltage: • Centrally controlled calculations • Updates every 15 minutes • Often remote controlled • Can be integrated in WAMS/WACS system

  21. 1018 MW 500 MW A B G G G G G G G G 1000 MW 500 MW Slack bus 344.3 MW 173.5 MW 170.4 MW Flow of A to B gets distributed according to the impedances C G G G 800 MW 800 MW losses: 18 MW Phase shifter influenceBase case

  22. 1024.6 MW 500 MW A B G G G G G G G G 1000 MW 500 MW 491.8 MW 15 ° 32.8 MW 33 MW Flow of A to B is taken mostly by line A-B C G G G 800 MW 800 MW losses: 24.6 MW Phase shifter influence1 phase shifter placed

  23. 1034 MW 500 MW A B G G G G G G G G 1000 MW 500 MW 580 MW 30 ° 42.3 MW 41.4 MW Overcompensation causes a circulation current C G G G 800 MW 800 MW losses: 34 MW Phase shifter influence1 phase shifter placed: overcompensation

  24. 1052.3 MW 500 MW A B G G G G G G G G 1000 MW 500 MW 15 ° 313.9 MW 15 ° 221 MW 238.4 MW The phase shifting transformers can cancel their effects C G G G 800 MW 800 MW losses: 52.3 MW Phase shifter influence2 phase shifters: cancelling

  25. 1052.3 MW FLOWS relative to base case (no PS) 500 MW A B G G G G G G G G 1000 MW 500 MW -8.8 % 15 ° 313.9 MW 15 ° 221 MW +14.6 % 238.4 MW +18.8 % When badly controlled, little influence on flows, more on losses C G G G 800 MW Additional losses: + 34.4 MW 800 MW Phase shifter influence2 phase shifters: cancelling

  26. 1052.3 MW 1054 MW FLOWS relative to base case (no PS) 500 MW 500 MW A A B B G G G G G G G G G G G G G G G G 1000 MW 1000 MW 500 MW 500 MW -8.8 % 30 ° 15 ° 313.9 MW 259.7 MW 15 ° 15 ° 259.7 MW 221 MW +14.6 % 294.3 MW 238.4 MW +18.8 % When badly controlled, little influence on flows, more on losses The phase shifting transformers can `fight' C C G G G G G G 800 MW 800 MW Additional losses: + 34.4 MW 800 MW 800 MW losses: 54 MW Phase shifter influence2 phase shifters: fighting

  27. 1054 MW FLOWS relative to base case (no PS) 500 MW A B G G G G G G G G 1000 MW 500 MW -24.5 % 15 ° 259.7 MW 30 ° 259.7 MW 294.3 MW +28 % +35 % The phase shifting transformers can `fight' C G G G 800 MW 800 MW losses: 54 MW Phase shifter influence2 phase shifters: fighting

  28. Phase shifters in Belgium • Zandvliet – Zandvliet • Meerhout – Maasbracht (NL) • Gramme – Maasbracht (NL) • 400 kV • +/- 25 ° no load • 1400 MVA • 1.5 ° step (34 steps) • Chooz (F) – Monceau B • 220/150 kV • +10/-10 * 1.5% V (21 steps) • +10/-10 * 1,2° (21 steps) • 400 MVA

  29. Overview • Power system control • Why? • How? • FACTS • Voltage control • Angle control • Impedance control • Combination • HVDC • Classic • Voltage source converter based

  30. Series compensationLine impedance adjustment

  31. Series Compensation – SC and TCSC • Balances the reactance of a power line • Can be thyristor controlled • TCSC – Thyristor Controlled Series Compensation • Can be used for power oscillation damping

  32. Unified Power Flow Controller Ultimate flow control ΔU

  33. UPFC - Unified Power Flow Controller • Voltage source converter-based (no thyristors) • Superior performance • Versatility • Higher cost ~25% • Concurrent control of • Line power flows • Voltage magnitudes • Voltage phase angles • Benefits in steady state and emergency situations • Rapid redirection power flows and/or damping of power oscillations

  34. 2 1 Unified Power Flow Controller (II) Ultimate flow control • Two voltage source converters • Series flow control • Parallel voltage control • Very fast response time • Power oscillation damper

  35. 1 2 3 Interline Power Flow Controller IPFC • Two voltage source converters • 2 Series flow controllers in separate lines

  36. Overview • Power system control • Why? • How? • FACTS • Voltage control • Angle control • Impedance control • Combination • HVDC • Classic • Voltage source converter based

  37. High Voltage Direct CurrentHVDC • High voltage DC connection • No reactive losses • No stability distance limitation • No limit to underground cable length • Lower electrical losses • 2 cables instead of 3 • Synchronism is not needed • Connecting different frequencies • Asynchronous grids (UCTE – UK) • Black start capability? (New types, HVDC light) • Power flow (injection) can be fully controlled • Renewed attention of the power industry

  38. History of HVDC

  39. (Sea) + - HVDC Configurations:Transmission modes (I) • Monopolar • Back to back • Multiterminal • Bipolar

  40. HVDC Configurations:Transmission modes (II)

  41. LCC HVDC • Thyristor or mercury-arc valves • Reactive power source needed • Large harmonic filters needed

  42. VSC HVDC • IGBT valves • P and Q (or U) control • Can feed in passive networks • Smaller footprint • Less filters needed

  43. HVDC ExampleNorned cable

  44. HVDC ExampleNorned cable: schema

  45. HVDC ExampleNorned cable: sea cable

  46. HVDC ExampleGarabi back to back

  47. HVDC ExampleGarabi back to back (4x)

  48. VSC HVDCexample: Murray link • Commissioning year:2002 • Power rating: 220 MW AC • Voltage:132/220 kV • DC Voltage:+/- 150 kV • DC Current: 739 A • Length of DC cable:2 x 180 km

  49. VSC HVDCexample: Troll • Commissioning year: 2005 • Power rating: 2 x 42 MW AC Voltage:132 kV at Kollsnes, 56 kV at Troll • DC Voltage: +/- 60 kV • DC Current: 350 A • Length of DC cable:4 x 70 km

  50. HVDC: Current sizes

More Related