1 / 56

Wireless Lab

Wireless Lab. Presented by Will Hayden. Design. Wireless Control System Server – 192.168.2.8 Windows Wireless Control System Server – 192.168.2.9 Linux Laptop – 192.168.2.6 1130 LWAP – 192.168.2.3 1240 LWAP - 192.168.2.4 Wireless LAN Controller Management – 192.168.2.10

leatrix
Download Presentation

Wireless Lab

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wireless Lab Presented by Will Hayden

  2. Design • Wireless Control System Server – 192.168.2.8 • Windows • Wireless Control System Server – 192.168.2.9 • Linux • Laptop – 192.168.2.6 • 1130 LWAP – 192.168.2.3 • 1240 LWAP - 192.168.2.4 • Wireless LAN Controller • Management – 192.168.2.10 • AP Management – 192.168.2.11

  3. Objectives • Configure a Wireless LAN Controller • Join a LWAP to the Controller • Convert a AP to LWAP • WLAN Configuration • Public • Private • Code Upgrade • Install and Configure WCS

  4. Configure a Wireless LAN Controller • Initial Configuration • Console connection • WLC 2006

  5. Configure a Wireless LAN Controller • clear config • Removes configuration • reset system • Reboots WLC

  6. Configure a Wireless LAN Controller • System Name [Cisco_33:45:40]: wlc01 • host name • Enter Administrative User Name (24 characters max): cisco • Administrator account • Enter Administrative Password (24 characters max): ***** • Administrator password

  7. Configure a Wireless LAN Controller • Management Interface IP Address: 192.168.2.10 • Address for management • Management Interface Netmask: 255.255.255.0 • Management Interface Default Router: 192.168.2.1 • Management Interface VLAN Identifier (0 = untagged): • Management Interface Port Num [1 to 4]: 4

  8. Configure a Wireless LAN Controller • Management Interface DHCP Server IP Address: 192.168.2.1 • AP Manager Interface IP Address: 192.168.2.11 • Address that AP communicate with • AP-Manager is on Management subnet, using same values • AP Manager Interface DHCP Server (192.168.2.1): • Virtual Gateway IP Address: 1.1.1.1

  9. Configure a Wireless LAN Controller • Mobility/RF Group Name: rf01 • Network Name (SSID): public • Allow Static IP Addresses [YES][no]: no • Configure a RADIUS Server now? [YES][no]: no

  10. Configure a Wireless LAN Controller • Enter Country Code (enter 'help' for a list of countries) [US]: • Enable 802.11b Network [YES][no]: yes • Enable 802.11a Network [YES][no]: yes • Enable 802.11g Network [YES][no]: yes • Enable Auto-RF [YES][no]: yes

  11. Configure a Wireless LAN Controller • WLC Rebooting

  12. Configure a Wireless LAN Controller • WLC services starting

  13. Configure a Wireless LAN Controller • Open Internet Explorer • https://192.168.2.10 • Login • Username: cisco • Password: cisco

  14. Join a LWAP to the Controller • 1130 and 1240 access point (already converted to LWAP)‏ • Connect access point to same layer 2 network as WLC (192.168.2.0)‏ • In this lab everything is on vlan1 (untagged)‏ • The access point will automatically associate with the WLC • This controller supports six access points

  15. Convert a AP to LWAP • AP before conversion

  16. AP1131AG-A-K9 • Product/Model Number: AIR-AP1131AG-A-K9 • Top Assembly Serial Number: FTX1117T0Y8 • System Software Filename: c1130-k9w7-tar.123-8.JEA • System Software Version: 12.3(8)JEA • Bootloader Version: 12.3(8)JEA

  17. Convert a AP to LWAP • AP before conversion

  18. AP1242AG-A-K9 • Product/Model Number: AIR-AP1242AG-A-K9 • Top Assembly Serial Number: FTX1038B3GJ • System Software Filename: c1240-k9w7-tar.123-8.JA2 • System Software Version: 12.3(8)JA2 Bootloader Version: 12.3(7)JA1

  19. Upgrade Tool • Upgrade Tool v3.2 • Download from Cisco • LWAP Recovery Image • Download from Cisco • Use to covert AP to LWAP

  20. Convert a AP to LWAP • Upgrade Tool

  21. Convert a AP to LWAP • IP File • IP Address of AP • User Name • Telnet password • Enable password

  22. Convert a AP to LWAP • Image loading onto AP

  23. Convert a AP to LWAP • LWAP associating to WLC

  24. Convert a AP to LWAP • LWAP downloading WLC code

  25. Convert a AP to LWAP • LWAP fully associated with WLC

  26. WLAN Configuration • Public WLAN • Private WLAN

  27. Public WLAN • Creating a new WLAN called “Public

  28. Public WLAN • Profile Name • WLAN SSID

  29. Public WLAN • Enabling “Public WLAN” • Allowable Radios • Network • Broadcast

  30. Public WLAN • Web Authentication

  31. Public WLAN • DHCP Required • P2P Blocking

  32. Public WLAN • AP configuration • WLAN Override

  33. Public WLAN • Connecting to “Public”

  34. Public WLAN • Web login

  35. Private WLAN • Creating “Private”

  36. Private WLAN • Enabling “Private WLAN” • Limiting Radios • Network • Broadcast

  37. Private WLAN • Layer 2 Encryption • WPA2+PSK

  38. Private WLAN • DHCP Required • P2P Blocking

  39. Private WLAN • Limiting WLAN's on AP radio

  40. Code Upgrade • SolarWinds TFTP server • Code stored here • GUI • Download file to Controller

  41. Code Upgrade • Upgrade started

  42. Code Upgrade • TFTP Server showing transmission

  43. Code Upgrade • Upgrade completed

  44. Code Upgrade • Reboot WLC to complete upgrade

  45. Install and Configure WCS • Windows Server 2003 • WCS 5.1.64.0 • WCS Password • Cisco101 • Server IP Address • 192.168.2.8

  46. Install and Configure WCS • Installation • Java • Apache • DB • WCS

  47. Install and Configure WCS • WCS Service • Starting

  48. Install and Configure WCS • WCS not running • Start Service • Reboot server

  49. Install and Configure WCS • Installing WCS on Linux • Chmod +x on .bin file • Make excutable • /WCS-STANDARD-K9-5.1.64.0.bin

  50. Install and Configure WCS • Login through web browser • Once WCS, Apache, DB are running

More Related