1 / 32

Drift chamber for super-Belle

Drift chamber for super-Belle. Present performance and background Idea for upgrade Upgrade plan Summary. Shoji Uno (KEK) Jan-20 th , 2003 at Super B-factory WS in Hawaii. Wire chamber. Wire chamber is a good device for the central tracker.

lea
Download Presentation

Drift chamber for super-Belle

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Drift chamber for super-Belle • Present performance and background • Idea for upgrade • Upgrade plan • Summary Shoji Uno (KEK) Jan-20th, 2003 at Super B-factory WS in Hawaii

  2. Wire chamber • Wire chamber is a good device for the central tracker. • Less material  Good momentum resolution. • Cheap  It is easy to cover a large region. • Established technology  Easy construction. • Many layers  Provide trigger signals and particle ID information. • Can the wire chamber survive at S-KEKB? • Answer is ” Yes”. • My talk and Senyo’s talk.

  3. Momentum Resolution • Thanks for filling He based gas and using Aluminum field wires. • The resolution was calculated using cosmic ray events during a normal physics run. • BaBar data was obtained from a talk in Vancouver WS.

  4. Bhabha Mu pair M.I.P in Hadronic events 0.35<P<0.88GeV/c without any PID. Electron dE/dx Resolution • Good resolution was obtained. • It is useful to identify hadrons and electrons.

  5. CDC Exp 27 Run 206 HER 1.1A LER 1.5A L=9.6x1033cm-1s-1 Hit rate/wire(kHz) Cathode Inner Main Layer Hit Rate • ~200kHz for inner most layers. • Chamber itself was working. • No significant gain degradation was observed for four years operation. • Exceeds 0.2C/cm. • 5-10KHz for most of layers. • Quite small. • The gas chamber can work at 20 times higher beam background. • Inner most part was replaced with a new chamber in the last summer.  At S-KEKB, it will be covered with a silicon detector.

  6. Total Current Draw of CDC • Total CDC current(8400 wires) has kept about 1mA at the maximum beam current for each years. • Vacuum condition is improving from year to year. • Better masking system has been adopted for fixed masks near IP and movable masks in arc section.

  7. Radiation Damage Test Gain degradation Total accumulated charge on sense wire(C/cm) a: ’93 Plastic tube d: ’94 SUS tube b: ’93 Plastic tube + O2 filter e: ’94 SUS tube + O2 filter c: ’94 Plastic tube f: ’94 Plastic tube

  8. Simulation Study for Higher Beam Background Detail will be reported by K.Senyo. MC +BGx1 MC+BGx20

  9. Idea for upgrade • In order to reduce occupancy, • Smaller cell size • More wires.  smaller hit rate for each wire. • Shorter maximum drift length  shorter maximum drift time. • A new small cell drift chamber was constructed((Maximum drift length is 2.5mm). • Inner most three layers were replaced with the new chamber in the last summer. • Faster drift velocity • Shorter maximum drift time. • One candidate : 100% CH4  Drift time simulation shows maximum drift time is similar to the present gas due to a large Lorentz angle. • More study

  10. Small Cell Drift Chamber

  11. Photo of small cell chamber Just after wire stringing Installation in the last summer

  12. XT Curve & Max. Drift Time Normal cell(17.3mm) Small cell(5.4mm)

  13. Drift Velocity • Two candidate gases were tested. • CH4 and He-CF4 • In case of He-CF4, higher electric field is necessary to get fast drift velocity. • In case of CH4, faster drift velocity by factor two or more can be obtained, even in rather lower electric field.

  14. dE/dx Resolution • The pulse heights for electron tracks from 90Sr were measured for various gases. • The resolutions for CH4 and He(50%)-C2H6(50%) are same. • The resolution for He-CF4 is worse than Ar-based gas(P-10).

  15. He/C2H6 = 50/50 Pure CH4 Drift time (msec) 100nsec 100nsec Distance from wire (cm) xt curve for 7mm cell Drift time (msec) Distance from wire (cm)

  16. Wire configuration • 9 super-layers : 5 axial + 4 stereo(2U+2V) • A 160*8, U 160*6, A 192*6, V 224*6, • A 256*6, U 288*6, A 320*6, V 352*6, A 388*8 • Number of layers : 58 • Number of total sense wires : 15104 • Number of total wires : ~60000

  17. Deformation of endplate • Number of wires increase by factor 2. • Larger deformation of endplate is expected. • It may cause troubles in a wire stringing process and other occasions. • In order to reduce deformation of endplates, • The endplate with a different shape is considered. • Wire tension of field wires will be reduced.

  18. Curved Endplate • Deformation of endplate due to wire tension was calculated at design stage of present Belle CDC. Deformation(mm) 35.2 2.03 1.31 Present New

  19. Baseline design CDC SVD

  20. Main parameters

  21. Expected performance • Occupancy • Hit rate : ~140kHz  ~7Hz X 20 • Maximum drift time : 80-300nsec • Occupancy : 1-4% 140kHz X 80-300nsec = 0.01-0.04 • Momemtum resolution(SVD+CDC) • sPt/Pt = 0.19Pt  0.30/b[%] : Conservative • sPt/Pt = 0.11Pt  0.30/b[%] : Possible  0.19*(863/1118)2 • Energy loss measurement • 6.9% : Conservative • 6.4% : Possible  6.9*(752/869)1/2

  22. Summary • Present CDC is working well. • Good momentum resolution is obtained even for low momentum range. • Energy loss measurement is also good. • Beam background is manageable range. • Vacuum condition is still improving. • New CDC • Smaller cell size for inner most layers. • New gas with a fast drift velocity is preferred. • Larger outer radius • Better performance is expected.

  23. Chamber Gas • He(50%)-C2H6(50%) • Longer radiation length(680m). • Drift velocity is higher than other He-based gas. • Average drift velocity : ~3.3cm/msec in the chamber cell. • Maximum drift time : ~400nsec for 18mm cell size. • Good dE/dx resolution. • Gas system • Gas circulation( Flow rate : 3.0 liter/min). • Fresh gas( Input flow rate : 0.3 liter/min). • Keeping anabsolute pressure constant. • O2 contamination ~50ppm (with O2 filter) • H2O contamination ~500ppm ( no control )

  24. Momentum Resolution • We could obtain a small constant term using He-based gas and aluminum field wires. • Slop parameter is not so good as compared with expected value. • We had to change the electronics parameters to reduce the cross talk. • HV is slightly lower than the original value. • Alignment is not perfect. • More tuning to reject bad points. • Some effects from the beam background. Transverse Momentum(GeV/c)

  25. dE/dx Measurement • MQT chip (Charge to Time conversion) and multi-hit TDC. • 80% truncated mean. • Relativistic rise. • 1.4 for electron. • Good PID performance for lower momentum region. • dE/dx information helps to separate high momentum K/p. Normalized dE/dx log10P(GeV/c)

  26. Comparison with Babar • Momemtum resolution(SVD+CDC) • sPt/Pt = 0.19Pt  0.30/b[%] : Belle • sPt/Pt = 0.13Pt + 0.45 [%] : BaBar • Mass(dE) resolution • Mass resolution for inclusive J/y  m+m- • 9.6 MeV(Belle) vs 12.3 MeV(BaBar) • dE resolution for B0 D-p+, D- K+p-p- • 13.8MeV(Belle) vs 19.0MeV(BaBar) • We could obtain better resolution than BaBar. • BaBar has a CFRP support cylinder with 2mm thickness between SVD and CDC. • Tracking efficiency for low momemtum particles is worse than BaBar. • D*+D*-yield(slow p eff.) ~0.5(?) x BaBar • 3 layers SVD (Belle) vs 5 layers SVD(BaBar) • Energy loss measurement • 5.6%(Belle)vs 7%(Babar) for Bhabar events

  27. Pulse Height Variation 2000 • Total accumulated charge. • >0.2 coulomb/cm at inner most layer for 4 years. • No significant deterioration, so far. Layer 49 Layer 1 Layer 3 Layer 49 Layer 1 2002 Layer 3

  28. CH4 • Faster drift velocity • Factor two faster than He(50%)-C2H6(50%) • Long radiation length • Same as He(50%)-C2H6(50%) • Good dE/dx resolution • Same resolution is expected from a test using electron from 90Sr. • Small radiation damage • Similar performance as He(50%)-C2H6(50%)

  29. Electron Drift Simulation • Electron drift simulation in gas volume was done by A.Sugiyama of Saga Univ., recently. • He/C2H6=50/50(present gas) and pure CH4 under 1.5 Tesla. • Small cell size(7mm) and normal cell size(18mm) Maximum drift time for pure CH4 is not shorter than the present gas due to large Lorentz angle. • Simulation shows He/CH4 =50/50 is slightly better than the present gas. • Smaller ionization loss  Worse spatial resolution and worse dE/dx resolution?

  30. Drift line for 7mm cell Pure CH4 He/C2H6 = 50/50

  31. Wire configuration • Super-layer structure • 6 layers for each super-layer • at least 5 layers are required for track reconstruction. • Even number is preferred for preamp arrangement on support board to shorten signal cable between feed-through and preamp. • Additional two layers in inner most super-layer and outer super-most layer. • Higher hit rate in a few layers near wall. • Inner most layer and outer most layer are consider as active guard wire.

  32. Problems and Cures • Cross Talk • Coaxial cable between pin and preamp. • Better grounding is also effective. • We replaced all cables with coaxial ones in summer 2003. • Then, electronics parameter will move back original one. • High background around inner most layer • Enlarge inner radius : 7.7cm  16cm • Smaller cell size : 8.6mm(64 in f)  6.8mm (160 in f) • One inner cylinder  No additional wall • Inner most layer should be considered as a guard wire(active). • 3D Tracking(especially, low momentum tracks) • 6(?) layers SVD • 6 layers in stereo super layer • Better track reconstruction program. • Charge division?

More Related