1 / 7

Converting a scanned map into GIS data

Converting a scanned map into GIS data. John McVay. My Field of Study: Environmental Science with a concentration in Community Land Planning. Career Aspiration: work for a land trust. How can this skill be applied?.

Download Presentation

Converting a scanned map into GIS data

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Converting a scanned map into GIS data John McVay

  2. My Field of Study: Environmental Science with a concentration in Community Land Planning. • Career Aspiration: work for a land trust

  3. How can this skill be applied? • Project that this information comes from prioritized areas for habitat protection – what some land trusts do. • Sometimes work in remote areas with no previously prepared GIS. Physical map may be all you start with. • As a planner, you can create new features in GIS by sketching features on the scanned map

  4. But First… You Have to Get Scanned Map Set Up in ArcGIS How to do this: • Open scanned image in ArcMap, click yes to build pyramids.

  5. Set coordinate system • Determine x,y coordinates for control points - Zoom in enough so that you can read the coordinates - Coordinates along the top and y-coordinates down the left side

  6. Adding Coordinates: • Zoom in • Display the Georeferencing toolbar. • Click the View Link Table button • Click the Add Control Points button • Position the crosshair so that it lines up precisely with the intersection of the blue tic mark and the black line of the map border.

  7. Right-click and choose “input X and Y.” • Enter x and y coordinates • Once all four coordinates added, to permanently apply the transformation to the data, you must use the “Rectify” command from the Georeferencing menu

More Related