1 / 39

Keith Smith

Emerging Technologies - Sustainable Development. Keith Smith. Centre for Clean Chemistry University of Wales Swansea. Need for Chemicals. Pharmaceuticals and health products. Plastics and other materials for construction and manufacturing. Agriculture - pesticides,

kosey
Download Presentation

Keith Smith

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Emerging Technologies - Sustainable Development Keith Smith Centre for Clean Chemistry University of Wales Swansea

  2. Need for Chemicals • Pharmaceuticals and health products • Plastics and other materials for • construction and manufacturing • Agriculture - pesticides, • weed - killers, fertilisers • Fuels and lubricants • Other - paints, dyes, liquid • crystals, specialities, etc.

  3. The World’s Population 1950 2.5 billion 1989 5.2 billion 2050 11 billion?

  4. Concerns and Solutions • Global population growth, leading • to increased consumption • Pollution of the environment, becoming • increasingly controlled • The chemicals/pharmaceuticals industry will come • under increasing pressure to adjust its processes to • ones that are more sustainable • Chemists need to devise new sustainable reactions

  5. Sustainable Development • Renewable energy. • Recycle all products. • Recover all waste. • Use atom efficient reactions. Search for Clean Chemistry

  6. Principles of Clean Chemistry • High yield of a single product. • Replace bulk reactants by catalysts. • Avoid/minimise use of solvent or replace • by water. • Use near - ambient conditions to minimise • fuel use. • Recycle any by-products or waste products.

  7. Electrophilic aromatic substitution • Many commercially important reactions • Acid activators often required • Waste acid streams need treatment • Excess reagents used, often involving heavy • metals or other undesirable materials • Reactions often not regioselective Need for clean chemistry

  8. CH3 CH3 CH3 CH3 NO2 H2SO4 + + HNO3 NO2 toluene NO2 ortho-nitrotoluene meta-nitrotoluene para-nitrotoluene Nitration of Toluene — a Dirty Process Disadvantages: • Yield of para product only about 35%. • Large excess of H2SO4 and excess HNO3 used. • Washes needed, giving large volume of acidic waste - water that has to be treated. • Fuel costs associated with distillation and sulfuric acid recovery.

  9. CH3 CH3 CH3 CH3 NO2 HNO3 + + Ac2O Hß NO2 toluene NO2 ortho-nitrotoluene meta-nitrotoluene para-nitrotoluene The Swansea Nitration Method Advantages: • Yield of para product is about 80%. • The only by-product (acetic acid) is easily recovered. • The H- catalyst can be re-used several times. • No water washing required. • Distillation costs (fuel) reduced.

  10. Comparison of the Old and New Nitration Methods To produce 100 tons para -nitrotoluene tons 200 Old Old 150 Old 100 New New New 50 Toluene required Nitric acid required By-product produced

  11. How the H- Catalyst Works Zeolite  • H- is a solid material known as a zeolite (the word • “zeolite” means “boiling stone”). • Zeolites are Si and Al mixed oxides with associated • cations, such as H+. • The H+ ions mean that zeolites can be strong acids, • making them useful as catalysts. • Zeolites have crystalline porous structures like • a mineral sponge. • The holes in the “sponge” have regular sizes, • with different sizes for different zeolites. • The reaction takes place within the confines of the pores.

  12. CH3 Potential catalytic sites Shape - Selectivity in a Zeolite Pore mainly para-product produced Interaction at a catalytic site favoured for attack at the para-position. REAGENT

  13. Further Nitration of Toluene

  14. Nitration of o-nitrotoluene Nitration is slow using acetic anhydride but quick using TFAA HNO3/TFAA high yield 2 : 1 HNO3/TFAA/Hb high yield 3 : 1 Zeolite has little effect on rate, but enhances selectivity a little Perhaps slowing down the reaction by adding diluent will help

  15. Effect of adding acetic anhydride HNO3/ TFAA/Ac2O 16% 2 : 1 HNO3/TFAA/Ac2O/Hb 99% 17 : 1 Reaction much slower without zeolite Zeolite enhances rate and selectivity substantially o-Nitrotoluene (17.5 mmol), HNO3 (17.5 mmol of 90%), TFAA (3.5 ml, 24 mmol), Ac2O (3.5 ml), Hb (1 g), -10 oC, 2 h

  16. One step dinitration of toluene Literature results: 2HNO3/H2SO4 4 : 1 24HNO3/Ac2O/Claycop/CCl4 85% 9 : 1 HNO3/H/reflux ?% 14 : 1 S.G.Carvalheiro, B.Manuela, P.Laszlo and A.Cornelis, PCT Int Appl, WO 94, 19, 310, 1/9/1994. R. Prins et al., poster at Europacat IV, Rimini, September 1999

  17. One step dinitration of toluene 0.5 g H (17.5 mmol scale) 98% 14 : 1 1.0 g H (17.5 mmol scale) 98% 25 : 1

  18. One pot two step dinitration of toluene 99% overall yield 70 : 1 ca. 3% of other isomers isolated yield 90% with 99% purity K Smith, T Gibbins, R W Millar and R Claridge, J. Chem. Soc., Perkin Trans. 1, 2000, 2753

  19. Another approach to “clean” nitration H Suzuki, S Yonezawa, N Nonoyama and T Mori, J. Chem. Soc., Perkin Trans. 1, 1996, 2385

  20. Modified approach to selective nitration Substrate Yield (%) Proportions ortho meta para toluene 85 53 2 45 benzene 50 -- -- -- fluorobenzene 95 7 0 93 chlorobenzene 95 14 <1 85 bromobenzene 94 22 <1 77 iodobenzene 95 37 1 62 K Smith, S Almeer and S J Black, Chem. Commun., 2000, 1571

  21. CH3 ca. 50% CH3 Br Br2 Fe(cat.) CH3 ca. 50% toluene Br Bromination of Toluene - Traditional Method 1 Advantages: reactants cheap; only one step. Problem: the two products have almost identical boiling temperature, so very difficult to separate — expensive in fuel and time.

  22. CH3 H2SO4 HNO3 CH3 toluene NO2 + CH3 CH3 CH3 NO2 CH3 CH3 + Fe/HCl NaNO2 HCl CuBr NO2 NH2 N2+ Br Cl- Bromination of Toluene Traditional Route 2 Advantage: easy separation at nitro stage; single isomer after. Problems: Low overall yield; several stages, each having its own waste. Easily separated by distillation

  23. CH3 CH3 toluene Br2 Na-Y 99% yield Br heat NaBr + H-Y The protonated catalyst can be re-activated by heating. Bromination of Toluene — a Clean Approach

  24. To produce 100 tons para -bromotoluene tons 600 450 New method Old method possibility 1 Old method possibility 2 300 150 Bromine used Toluene used Other materials used Waste products Comparison of theOldandNewBromination Methods

  25. PEN - an important speciality polymer (PEN is the homopolymer of ethylene glycol with 2,6-naphthalenedicarboxylic acid) Applications of PEN: • Films:(Magnetic recording tapes, flexible printed circuit boards) • Industrial Fibres:(Rubber reinforcement for tyres, hoses and belts) • Packaging:(High acidity foods, carbonated beverages) • Liquid Crystalline Polymers: (Melt-processible thermotropic liquid crystalline polyesters) • Coatings, Inks and Adhesives: (Improvements in flex, surface hardness, etc.)

  26. An interesting problem - selective 2,6-dialkylation of naphthalene (an important PEN intermediate) (a potential precursor)

  27. The nature of the problem Requirements • A high conversion of naphthalene to alkylated products • A high yield of the desired 2,6-dialkylnaphthalene • Very little of any other dialkylnaphthalene, especially 2,7-

  28. Catalyst HM HY HY Naphthalene conversion (%) 74.4 94.0 52.4 DAN (%) 36.3 43.2 27.8 2,6-DAN (%) 25.7 18.6 23.3 5.9 2,6/2,7 3.0 1.2 Reference Kim et al. Applied Catal.A:Gen., 131, 1995, 15. Moreau et al. J. Org. Chem., 57, 1992, 5040. Moreau et al. Applied Catal.A:Gen., 159, 1997, 305. Recently published results for 2,6-dialkylnaphthalene (DAN) selectivity

  29. HY (15) HM (10) HBeta (12) HZSM-5 (25) HMMS (10) Catalyst (Si/Al) 89 22 49 0 Naphthalene conversion (%) 43 45 2 4 0 DTBN (%) 9 33 2 2 0 2,6-DTBN (%) 6 2.7 1.1 - - 1.9 2,6/2,7 Varying the catalyst Preliminary investigation: 2 h autoclave reactions at 160 oC (Catalyst (0.5 g), Nap (10 mmol), ButOH (20 mmol), cyclohexane (100 ml))

  30. Optimisation of the reaction • Increasing the temperature • Increasing the reaction time • Increasing the amount of catalyst • Increasing the amount of tert-butanol • Decreasing the amount of solvent • Increasing the Si/Al ratio • Multistage reactions in 10 ml solvent

  31. 2 4 3 Stage 1 92 97 96 72 Naphthalene conversion (%) 65 64 65 44 DTBN (%) 63 61 62 43 2,6-DTBN (%) 34.8 19.1 25.1 37.1 2,6/2,7 Multistage reactions in 10 ml solvent 1 h autoclave reactions at 180 oC (HM (Si/Al (10) (4.0 g), Nap (10 mmol), ButOH (80 mmol), cyclohexane (10 ml)) Observations: Increases the conversion Maximum yield of DTBN and 2,6-DTBN by 2nd stage Decreases the 2,6/2,7 ratio somewhat

  32. HY HM Catalyst 52.4 96 Naphthalene conversion (%) 27.8 61 DTBN (%) 23.3 60 2,6-DTBN (%) 5.9 50.6 2,6/2,7 Reference P. Moreau et al. Applied Catal.A:Gen., 159, 1997, 305. K. Smith and S.D. Roberts Catalysis Today, 2000, 60, 227-233. Comparison of results for 2,6-di-tert-butylnaphthalene (DTBN) selectivity after optimisation

  33. Conclusions • Nitration of aromatics with very high regioselectivity. • Direct nitration of toluene to 2,4-dinitrotoluene • (near quantitative yield, 2,4:2,6 ratio around 70). • New nitration reaction using N2O4 and O2 over Hb. • Bromination of aromatics with superb regioselectivity. • Selective di-tert-butylation of naphthalene to the 2,6-isomer in 60% yield with a 2,6-:2,7- ratio of over 50.

  34. Thanks The Funding Bodies: Zeneca, EPSRC, DERA, Governments of Qatar and Kuwait, Zeolyst International (for samples) Researchers Adam Musson (Gareth DeBoos) Tracy Gibbins (Ross Millar, Rob Claridge) Saeed Almeer (Steve Black) Dawoud Bahzad Simon D Roberts My Research Group

  35. 1999

More Related