1 / 26

Some Fact about LEDs and UV-radiation

Some Fact about LEDs and UV-radiation. Labino AB Adisa Paulsson M.Sc., Product Development Engineer August 2010. Labino. We develop and manufacture the UV and white light lamps for industry and public sector. The lamps are based on MPXL and LED technology. Founded 1994, Sweden.

kishi
Download Presentation

Some Fact about LEDs and UV-radiation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Some Fact about LEDs and UV-radiation Labino AB Adisa Paulsson M.Sc., Product Development Engineer August 2010

  2. Labino • We develop and manufacture the UV and white light lamps for industry and public sector. • The lamps are based on MPXL and LED technology. • Founded 1994, Sweden

  3. Topics today • Historical development of the power LEDs • How LEDs operate • Factors influencing the Lifetime and Reliability • How to produce the white light • UV LED technology

  4. What are the LEDs? Electroluminescence! -Electroluminescence was discovered in 1907 -first LED was reported in 1927, by Oleg Losev -LEDs are semiconductor which emits the photons when current is passing trough the material -Color = energy gap of the semiconductor InGaN- near UV,blue,green AlGaN- red, infrared, amber

  5. LEDs become more and more bright! First power LED was introduced by Philips Lumileds 1999. XLamp XM LED delivers efficacy of 160 lm/W (at 350 mA) At 2A, XM LED produce 750 lm at 7W = 60W incandescent light bulb Luminous flux increased by factor of 2 every 18-24 months! 5 mm LEDs,1-2 lm Luxeon I- 5 lm 2002 Luxeon III- 50 lm 2006 Luxeon Rebel-120 lm, 2010

  6. Efficiency is increasing • Approaching 2010: Luminous efficiency 160 lm/ W phosphor white power LEDs •Expect ~ 200 lm/W power LED performance within the next 3-5 years

  7. More facts about LEDs The LEDs are not so cold ! ! Increasing the power requires more heat to evacuate !!

  8. Temperature effect on the LEDs! Efficiency Useful Life

  9. Temperature effect on the LEDs! Wavelength shift as a function of the temperature

  10. Lifetime of LEDs How to define the useful lifetime of the LEDs? Lumen maintenance or Lumen depreciation! LM-80 test criteria developed by U.S. Department of Energy and LRC L70 -at least 70 % of the initial lumen output B50-50% of population fails B50/L80 or B10/L70 B10/L70 at 60 000 hours

  11. Lifetime of LEDs 2. Temperature internal and ambient 1. Drive current Source: LED Magazine, 51 news letter, November 2007

  12. LED Luminaire Lifetime ● Complexity of LED luminaire. ● Luminaire reliability is the product of all the critical components: -in well designed luminaire - the failure should be caused by lumen depreciation

  13. Quality is a major issue! Performance of the white LEDs • The quality of commercial white LEDs used in • lightning products varies widely (26 batches) • -A quality assurance is needed to protect • consumers and prevent “market spoiling” Source: Mills E. and A. Jacobson, 2007, Light and Engineering

  14. Producing the White Light (1) -Color mixing of usually three colors -High efficacy -trade off between luminous efficiency and color rendering capability -requires electro-optical devices to control mixing of different colors -Individual colored LEDs respond differently to drive current, temperature- impact on white light quality 1. Color-mixing LEDs (RGB method)

  15. Producing the White Light (2) 1. Phosphor conversion approach (blue or UV-light +phosphor) Broadening of the spectra with phosphor layers GaN or InGaN LED -the most common method blue LED + Phosphor -UV phosphor coated LEDs –less efficient, better color rendering - low conversion efficiency -A lot of research to improve phosphor coating quality and efficacy -More simple and not so costly production compared to RGB system

  16. What are the Limits of the high power White Light chip? U.S. DOE Forecasted LED Efficacy Improvements, 2009 -Difference between cool and warm white origin from phosphor efficacy.

  17. How green are LEDs? Life cycle assessment of Ultra Efficient lamps Source: DEFRA-Department for Environment(UK), 2009

  18. UV-LED Technology What is the main difference between UV LED and traditional UV light source? No UVB! Xe spectra UV LED spectra

  19. UV LED Technology The peak wavelength is at 365 nm UV LED also emits a small amount of the visible light mostly blue-violet in spectral range 380nm to 475nm. blue LED, InGaN

  20. UV-LED and White Light The visible light (380nm-780) in UV sources-bad for many applications! White Light Block Filter! How to solve this technology insufficiency?

  21. Life time presumption of UV-LED - 6000 hours life test data -The data exceeds the absolute maximum rating.

  22. Measurement of the visible light in UV- light sources 1.Spectral sensitivity curve of the detector 2. Fluorescence of the detector High transmittance in visible area!

  23. UV LED versus MPXL MPXL UV-LED +light weighted and small +good efficiency +robust +long life +Intensity: 0.3 W of UVA radiation -High cost of lm/W compared to MPXL +Cold (no IR) -sensitive to high ambient temperature -Lack of standard optical solutions -Problem with white light leakage-requires filter -require active or passive cooling solution • -Big and clumsy • +high efficiency • +keeps running after drop • +lifetime up to 4000 hours • + high intensity: 5 W of UVA radiation • +relatively low cost • the bulb gets very hot • + Relative insensitive to ambient temperature Technologies are complementing each other!

  24. Conclusions • The LEDs have a great potential: light waited, high efficiency and low cost products(white). • Challenges: • Increase power per chip • Improve the efficacy of the LEDs specially UV and green • Increase the product quality and reliability • Increase the luminere system efficiency (electronic, optics, heat management) • Enhance production process/ Reduce binning • Reduce environmental impact • A new material for UV needed

  25. At Last LEDs…. • Who truly wants to unleash the potential of LED technology should not only seize the opportunities, but also bear some of the responsibilities. False or incomplete information → wrong expectations Wrong expectations→ Unhappy users 100 lm/W LEDs do not make a 100 lm/W light source 50 000 hours lifetime do not make a LED light source with 50 000 lifetime.

  26. Thank you! Labino AB Stockholm | Sweden

More Related