1 / 12

Signals and Systems

Signals and Systems. Lecture 20: Chapter 4 Sampling & Aliasing. Today's lecture. Spectrum for Discrete Time Domain Oversampling Under=sampling Sampling Theorem Aliasing Ideal Reconstruction Folding. General Formula for Frequency Aliases.

Download Presentation

Signals and Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Signals and Systems Lecture 20: Chapter 4 Sampling & Aliasing

  2. Today's lecture • Spectrum for Discrete Time Domain • Oversampling • Under=sampling • Sampling Theorem • Aliasing • Ideal Reconstruction • Folding

  3. General Formula for Frequency Aliases • Adding any integer multiple of 2πgives an alias = 0.4 π + 2 πl l = 0,1,2,3,….. • Another alias x3[n] = cos(1.6πn) x3[n] = cos(2πn - 0.4πn) x3[n] = cos(0.4πn) Since cos (2πn - θ) = cos (θ ) • All aliases maybe obtained as , + 2 πl , 2 πl - l = integer o o o

  4. Folded Aliases • Aliases of a negative frequency are called folded aliases Acos (2πn - n - θ) = Acos ((2π - )n- θ) = Acos (- n- θ) = Acos( n + θ) • The algebraic sign of the phase angles of the folded aliases must be opposite to the sign of the phase angle of the principal alias. o o o o

  5. Spectrum of a Discrete-Time Signal y1[n] = 2cos(0.4πn)+ cos(0.6πn) y2[n] = 2cos(0.4πn)+ cos(2.6πn)

  6. Spectrum for x[n]

  7. Digital Frequency and Frequency Spectrum

  8. Spectrum of a Discrete-time signal obtained by sampling • Starting with a continuous-time signal x[t] = A cos(ωot+ ) • Spectrum consists of two spectral lines at +ωo with complex amplitudes 1/2A e +jφ • The sampled discrete-time signal x[n] = A cos((ωo/fs)n+ ) x[n] = 1/2Ae+jφe+ j(ωo/ fs )n+ 1/2Ae - jφe - j(ωo/ fs )n • Has two spectrum lines at ώ = +ωo /fs, but it also must contain all the aliases at the following discrete-time frequencies ώ = + ωo /fs+ 2πl l=0, +1, +2,… ώ = - ωo /fs+ 2πl l=0, +1, +2,…

  9. Spectrum (Digital) with Over-sampling

  10. Spectrum (Digital) with fs = f (under-sampling)

  11. Sampling Theorem • Continuous-time signal x(t) with frequencies no higher than fmax can be reconstructed from its samples x(k Ts) if samples taken at rate fs > 2 fmax Nyquist rate = 2 fmax Nyquist frequency = fs/ 2 • Sampling theorem also suggests that there should be two samples per cycle. • Example: Sampling audio signals Normal human ear can hear up to 20 kHz

  12. Sampling Theorem

More Related