1 / 18

Resistor Combinations; Source Transformation

Resistor Combinations; Source Transformation. Dr. Holbert February 4, 2008. Introduction. For analysis, series resistors/impedances can be replaced by an equivalent resistor/ impedance Parallel resistors/impedances can be replaced by an equivalent resistor/ impedance

kaz
Download Presentation

Resistor Combinations; Source Transformation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Resistor Combinations; Source Transformation Dr. Holbert February 4, 2008 EEE 202

  2. Introduction • For analysis, series resistors/impedances can be replaced by an equivalent resistor/ impedance • Parallel resistors/impedances can be replaced by an equivalent resistor/ impedance • Complicated networks of resistors/ impedances can be replaced by a single equivalent resistor/impedance EEE 202

  3. i(t) i(t) + + v(t) Req v(t) – – Equivalent Resistance • Req is equivalent to the resistor network on the left in the sense that they have the same i-v characteristics • The rest of the circuit cannot tell whether the resistor network or the equivalent resistor is connected to it EEE 202

  4. Req Series Resistance Req = R1 + R2 + R3 R1 R2 R3 EEE 202

  5. R1 R2 Req Parallel Resistance R3 EEE 202

  6. Equivalent Sources • An ideal current source has the voltage necessary to provide its rated current • An ideal voltage source supplies the current necessary to provide its rated voltage • A real voltage source cannot supply arbitrarily large amounts of current • A real current source cannot have an arbitrarily large terminal voltage EEE 202

  7. A More Realistic Source Model i(t) The Circuit + Rs + – vs(t) v(t) – The Source EEE 202

  8. I-V Relationship The I-V relationship for this source model is v(t) = vs(t) –Rsi(t) v(t) i(t) EEE 202

  9. Open Circuit Voltage • If the current flowing from a source is zero, then the source is connected to an open circuit • The voltage at the source terminals with i(t) equal to zero is called the open circuit voltage: voc(t) EEE 202

  10. Short Circuit Current • If the voltage across the source terminals is zero, then the source is connected to a short circuit • The current that flows when v(t) equals zero is called the short circuit current: isc(t) EEE 202

  11. voc(t) and isc(t) • Since the open circuit voltage and the short circuit current determine where the I-V line crosses both axes, they completely define the line • Any circuit that has the same I-V characteristics is an equivalent circuit v(t) voc(t) isc(t) i(t) EEE 202

  12. Equivalent Current Source i(t) The Circuit + is(t) Rs v(t) – EEE 202

  13. Source Transformation Rs + – Vs Is Rs EEE 202

  14. Source Transformation • Equivalent sources can be used to simplify the analysis of some circuits • A voltage source in series with a resistor is transformed into a current source in parallel with a resistor of the same value • A current source in parallel with a resistor is transformed into a voltage source in series with a resistor of the same value EEE 202

  15. Averaging Circuit How can source transformation make analysis of this circuit easier? 1kW 1kW + + – + – V1 Vout 1kW V2 – EEE 202

  16. Source Transformations 1kW 1kW + + – + – V1 Vout 1kW V2 – EEE 202

  17. Source Transformations + 1kW 1kW 1kW V1 /1kW V2 /1kW Vout – Which is a single node-pair circuit that we can use current division on! EEE 202

  18. Class Examples • Drill Problems P3-1, P3-2, P3-3 EEE 202

More Related