1 / 31

Chap.31 Surface Treatment, Finishing & Surface Integrity

Chap.31 Surface Treatment, Finishing & Surface Integrity. Tab3-1. Contents. Mechanical Cleaning & Finishing: Abrasive Cleaning, Barrel Finishing & Tumbling, Vibratory Finishing, Mass-Finishing, Belt Sanding, Wire Brushing, Buffing, Electorpolishing Chemical Cleaning:

kamana
Download Presentation

Chap.31 Surface Treatment, Finishing & Surface Integrity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chap.31 Surface Treatment, Finishing & Surface Integrity

  2. Tab3-1 Contents • Mechanical Cleaning & Finishing: • Abrasive Cleaning, Barrel Finishing & Tumbling, Vibratory Finishing, Mass-Finishing, Belt Sanding, Wire Brushing, Buffing, Electorpolishing • Chemical Cleaning: • Alkaline Cleaning, Solvent Cleaning, Vapor Degreasing, Ultrasonic Cleaning, • Acid Pickling • Coatings: • Painting( Wet / Dry), temperature), Hot Dip Coating, Chemical Conversion Coating, Coloring Metals, Electroplating, Anodizing, Electroless Plating, Mechanical Plating, Porcelain Enameling • Vaporized Metal Coatings, Cladding, Textured Surface, Coil-coated Sheet, Edge Finishing & Burrs, Fatigue Failures

  3. Tab31-1

  4. Tab3-1 Mechanical Cleaning & Finishing • Abrasive cleaning: Some type of abrasive, usually sand and steel grit, or a high-velocity air blast is impelled against the surface to remove foreign materials such as sand or scales. • Barrel finishing or tumbling: Barreling or vibrating with the use of synthetically shaped media and compounds • Buffing: Polishing with a revolving cloth buffing wheel • Wire brushing • Belt sanding • Electropolishing (anode: work): 전기도금(anode: plate metal; cathode: work)의 원리를 반대로 이용

  5. Mechanical Cleaning and Finishing

  6. Mechanical Cleaning and Finishing

  7. Mechanical Cleaning and Finishing

  8. Tab31-2 Mass Finishing

  9. Mechanical Cleaning and Finishing

  10. Tab3-1 Chemical Cleaning • Alkaline cleaning: emulsification (유화) of the oils and greases • Solvent cleaning • Vapor degreasing • Pickling • Ultrasonic cleaning • Painting • Acrylic enamels are widely used for automobile finishes. • Dipping, hand spraying, automatic spraying, electrostatic spray finishing, and electrocoating • Often at least two coats of paint are required. • The first coat is to 1) assure adhesion, 2) provide a leveling effect, and 3) improve corrosion resistance and thus prevent later coatings from being dislodged.

  11. Tab31-3 Coatings

  12. Tab3-1 Metal/Oxide Coatings and Platings • Hot dipping (용융도금법): 주로 주철이나 강을 도금재료의 용탕 속에 담갔다가 꺼냄으로써 피막을 입혀 내부식성을 높히는 것. 예: Galvanized plate (아연도강판): 자동차 차체용 • Electroplating (전기도금법): 음극(cathode)의 소재와 양극(anode)의 도금재료 사이의 전위차에 의해 야기되는 전해작용을 이용, 양극에서 방출되는 금속이온들이 전해액 속의 이온들과 결합하여 음극으로 이동되어 증착. 도금재료: 크롬, 니켈, 카드뮴, 구리, 아연, 주석. • Electropolishing (anode: work): 전기도금(anode: plate metal; cathode: work)의 원리를 반대로 이용 • Anodizing (양극처리법): 소재를 양극으로 하면 양극에서 발생하는 산소를 이용하여 소재표면에 산화층을 입힐 수 있음, 주로 알루미늄, 착색피막, 도색 예비공정(알루미늄은 도색이 곤란), 내부식성 증가 • Electroless plating (무전해도금법): 화학반응을 이용한 도금, 도금재료: 주로 니켈, 전기 전도성이 없는 플라스틱도 도금 가능.

  13. Coatings

  14. Tab31-4 Coatings

  15. Coatings

  16. Coatings

  17. Coatings

  18. Coatings: Anodizing

  19. Coatings: Electroless Plating

  20. Tab3-1 Vaporized Metal Coatings • Vacuum coating (진공증착법) • 고온의 진공상태에서 피복될 금속을 기화시켜 모재의 표면에 매우 얇은 피복층을 형성 • 복잡한 형상에도 균일한 피복 가능 • 고가 금속(금, 은)을 증착, 장식용(보석, 가전제품) • Sputtering • 불활성기체(아르곤)가 전기장에 의해 이온화되면서 생기는 양이온이 피복재료(음극)를 때리면 피복재료의 원자가 튀어 나와 모재표면에 응축됨. • 면도날의 크롬 피복: 내부식성 향상

  21. Edge Finishing and Burrs

  22. Tab31-5

  23. Edge Finishing and Burrs

  24. Surface Integrity

  25. Tab31-6 Surface Integrity

  26. Surface Integrity

  27. Surface Integrity

  28. Fatigue Failure Associated with Surface Integrity

  29. Fatigue Failure Associated with Surface Integrity

More Related