1 / 23

By: Tyler Rice, Chris Meyer August 21, 2007

Efficiency and Purity Studies Outside the VXD: Applying AxialBarrelTrackfinderZ and GarfieldTrackFinder. By: Tyler Rice, Chris Meyer August 21, 2007. Event and Particle Restrictions. Data Sample: ZPole bbar events Event Requirements Thrust value to exceed 0.94

kalei
Download Presentation

By: Tyler Rice, Chris Meyer August 21, 2007

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Efficiency and Purity Studies Outside the VXD:Applying AxialBarrelTrackfinderZ and GarfieldTrackFinder By: Tyler Rice, Chris Meyer August 21, 2007

  2. Event and Particle Restrictions Data Sample: ZPole bbar events Event Requirements • Thrust value to exceed 0.94 • Cosine theta of the thrust axis to be less than 0.5 in magnitude Particle Requirements • Not Backscatter • Charged, Intermediate or Final State • Path-length exceeds 500mm in magnitude • Transverse momentum above 0.75GeV • Cosine theta less than 0.7 in magnitude • Radius of origin less than 1200mm in magnitude Reconstructed Track Requirements • DCA < 100mm • Pt > 0.75 GeV/c • Cosine theta less than 0.8 in magnitude

  3. Procedure • Methods written into Garfield which determine the MC Particle associated with a found track • 10cm Z segmentation applied in both AxialBarrelZ (Lori Stevens) and Garfield Trackfinders (ABTFZ and GTF). • Methods written into ABTFZ to define the minimum number of layers necessary for a track to be found, this was then varied between 4 and 5 layers. • Events which pass the acceptable criteria are passed first into a cheater which removes all MC Particles originating within 2cm of the origin (these are assumed to have been found by another algorithm). The remaining list is then passed into ABTFZ, which further removes found MC Particles, and outputs the final list into GTF, which applies calorimeter assisted tracking to find the remaining tracks. • Histograms created with the kinematic properties of found, fake, and missed particle tracks. A “found” track requires at least 80% purity (either 4/4, 4/5, or 5/5 matching hits with an MC particle).

  4. Total Event and MC Particle List Figure1: Total number of events, out of 1000, which pass the event test stated above. Appx. 26%

  5. Figure 2: Total number of MC Particles passing our restrictions (289), plotted as a function of pT Figure 3: Total MC Particles plotted as a function of their respective number of hits on the five central tracking layers.

  6. Figure 4: Total MC Particles plotted as a function of radius of origin. 35 particles have a radius of origin outside 460mm (radius of the second layer)

  7. EfficiencyABTFZ Followed by GTF Requiring a Minimum 4hits in Either to Reconstruct a Track *Note* Figure 12 reflects a simple study that was done regarding 3 hit Garfield tracks, in which the GTF was set to a minimum 3hits and ABTFZ kept at 4hits.(10cm segmentation)

  8. 239 out of 289 Particles were Found, Which Equates to 83% Efficiency Figure5: Total number of MC particles found by ABTFZ (234/289) as a function of radius of origin (Rorg). All of the found particles have an Rorg under 460mm. Figure6: Total number found by GTF, only 5/289 total found tracks (2%). Again, all found Rorg lie under 460mm

  9. Missed MC Particles Figure7: Missed MC particles with Rorg. 35 of these lie outside 460mm. Eliminating all particles which originate outside 460mm (ones which leave at most 3 hits), we achieve 94% efficiency.

  10. Missed MC Particles with 460mm Rorg Cut Figure8: Total missed MC particles vs. transverse momentum. We see a spike right around 0.75 (the minimum allowed pT) Figure9: Total missed particles vs. number of hits. Only 7 of these are 4 or 5 hit tracks.

  11. PurityABTFZ Followed by GTF Requiring a Minimum 4hits in Either to Reconstruct a Track(10 cm segmentation in ABTF and GFT)

  12. 27 out of 266 ABTFZ Reconstructed Tracks were Fake Tracks. This equates to ~90% Purity for ABTFZ Figure10: Total number of fake reconstructed tracks (purity below 75%) plotted vs. transverse momentum. We again see a higher amount of fakes at low pT.

  13. 9 out of 15 GTF Reconstructed Tracks were Fake Tracks. This equates to ~40% Purity for Garfield Figure11: Total number of fake reconstructed tracks (purity below 75%) plotted vs. transverse momentum for the Garfield Trackfinder. We again see a higher amount of fakes at low pT.

  14. When letting in 3 hit (& 1 stub) tracks from Garfield, 18 out of 39 tracks are fake. This equates to only about 54% purity. Figure12: Total number of reconstructed 3 hit tracks. Fake tracks are plotted with “0” and high purity tracks with “1.” At the moment, there are just too many fake 3 hit non-prompt tracks to be useful.

  15. EfficiencyABTFZ Requiring a Minimum 5hits to Reconstruct a Track Followed by GTF Requiring a Minimum 4hits

  16. 210 out of 289 Particles were Found, Which Equates to 73% Efficiency Figure13: Total number of MC particles found by ABTFZ vs. radius of origin (Rorg). All of the found particles have an Rorg under 460mm. Figure14: Total number found by GTF, 66 out of 210 total found tracks. Again, all found Rorg lies under 460mm

  17. Missed MC Particles Figure15: Missed MC particles with Rorg. 35 of these lie outside 460mm. Eliminating all particles which originate outside 460mm (ones which leave at most 3 hits), we achieve 83% efficiency.

  18. Missed MC Particles with 460mm Rorg Cut Figure16: Total missed MC particles with Rorg < 460mm, vs. transverse momentum. Again, we see a large majority occurring at low momentum Figure17: Total missed particles with Rorg < 460mm vs number of hits. About 30 of these are 4 or 5 hit tracks

  19. PurityABTFZ Requiring a Minimum 5hits to Reconstruct a Track Followed by GTF Requiring a Minimum 4hits

  20. 8 out of 74 GTF Reconstructed Tracks were Fake Tracks. This equates to ~90% Purity for GTF Figure18: Total number of fake reconstructed tracks (purity below 75%) plotted vs. transverse momentum for the Garfield Trackfinder. We again see a higher amount of fakes at low pT.

  21. For Rorg < 460

  22. Conclusions (10cm Z Seg.) • The addition of GTF provides a modest increase in efficiency/purity • One reason GTF is missing the 4hit tracks that ABTFZ does not find may be because the tracks do not enter the calorimeter (further study on this will be done). A possible solution to this would be to run ABTFZ again after GTF with a 4hit minimum. Our hope is that this will find the remaining 4 hit tracks, but keep the number of fakes down. • The purity of 3 hit tracks in GTF is essentially too low to use. Can we do anything about this? • We are now working on an ABTFZ and GTF combined z-segmentation study. • We are also looking into the possibility of extending ABTFZ into the vertex detector.

  23. Thanks for Your Time!The End

More Related