1 / 5

Balance Training Tower

Balance Training Tower. System Analysis Describing device to customer. Usage Top View. Screen for PT to set up game and then get readings from at the end. Tower 1. PT. Patient. Tower 2. Distance to Patient Ideal: Electrical Technology Back up 1. Laser Tape Measure

jerria
Download Presentation

Balance Training Tower

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Balance Training Tower System Analysis Describing device to customer

  2. Usage Top View Screen for PT to set up game and then get readings from at the end Tower 1 PT Patient Tower 2 Distance to Patient Ideal: Electrical Technology Back up 1. Laser Tape Measure Back up 2: Electrical Tape Measure Back up 2. Matt

  3. Rounded Corners Usage Side View LED Lights above and below buttons. 5” 7.5” .5” Capacitance Button 5’ Red- incorrect Green- achieved Yellow- goal Removable Base Design -30lbs 15lbs per side Assuming 27” Tower weight 25lbs

  4. On/Off Switch Usage Back View Screen Buttons underneath associated will be specific to the current menu. User’s Manual Removable Battery Recharge outside of the system Specialized battery with instructions on where to buy.

  5. Powered On (Switch! Not low power mode) • Common: • Calibrate initial variables • Patient to tower • Tower to tower • Angle? • “Play again” prompt @ end of round PT Options Power Tower Connect (Rotate Colors while searching, Green LED’s & success MSG on connect Output Information Timed Touch Proximity Touch • PT Configuration Options • Choose timeout(10 seconds) • PT Configuration Options • Choose available targets • Choose timeouts(10 sec default) • # of levels? (default 5 buttons) • Power off capacitance buttons • Power on IR sensors Future game Idea: # of misses Determines Enough of game • Power off IR sensors • Power on capacitance sensors • Information Output to PT • Closest distance attained • LED’s indicate current location • Red: part way • Yellow: closer • Green: target obtained • Information Output to PT • # of targets successfully hit out of total • Total elapsed time total • Time it took to hit button from time light turn on • Location of success/failures

More Related