1 / 10

Crack determination

Crack determination . Made by Voronova O.Y. Scientific supervisor – Volchuc V.N. Language supervisor – Kuznecova E.S. Crack . Can be defined as an extreme defect, being a region with completely broken atomic bonds (bank of cracks) and partly broken atomic bonds (crack tip). Fracture.

jennis
Download Presentation

Crack determination

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Crack determination Made by Voronova O.Y. Scientific supervisor – Volchuc V.N. Language supervisor – Kuznecova E.S.

  2. Crack Can be defined as an extreme defect, being a region with completely broken atomic bonds (bank of cracks) and partly broken atomic bonds (crack tip).

  3. Fracture Brittle fracture Ductile fracture

  4. General Information -Experimental determination of crack -structural features -specimen “compact” model -stress intensity

  5. Fragility is not a property

  6. The influence of structural features • brittle fractures; • larger grains of ferrite; • distribution of cementite (Fe3C); • impurities effect.

  7. The effect of additives -oxygen,nitrogen,phosphorus, sulfur,silicon -vanadium,cobalt ,chromium -manganese,copper,nickel

  8. Standard sample Parameter of fracture toughness-is a property of material characterizes its viscosityor ability to slow down the destruction

  9. Stress intensity (29.6(-185.5(+655.7(-1017() - characteristic of fracture toughness in plane deformation (MPa× m1/2);B - specimen thickness (mm); W- width of specimen (mm); P -cycle loading;a - initial crack length (mm).

  10. Thank you for your attention!

More Related