1 / 7

Geometric Dimensioning and Tolerancing

Geometric Dimensioning and Tolerancing. unit 5, product plans & virtual condition chapter 7, virtual c ondition. Introduction. Chapter introduces an important concept related to the mating of parts in an assembly.

jdrummond
Download Presentation

Geometric Dimensioning and Tolerancing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Geometric Dimensioning and Tolerancing unit 5, product plans & virtual condition chapter 7, virtual condition

  2. Introduction • Chapter introduces an important concept related to the mating of parts in an assembly. • Interchangeability of parts and assemblies can only be ensured when parts are accepted at virtual condition or better.

  3. External Feature • Suppose we’re making a clearance hole to fit over a peg. How big should we make the hole to make sure we have clearance? Well, what’s the virtual size of the peg?

  4. Virtual Condition The virtual condition of a hole is the region that is guaranteed to be free space. The virtual condition of a peg is the region that might be occupied. If the virtual condition of the hole is larger than the virtual condition of the peg, then we are guaranteed that the hole will clear the peg.

  5. The virtual size of a hole will equal the diameter of the hole minus any position tolerance. Check the extreme limits.

  6. The virtual size of a peg will equal the diameter of the peg plus any position tolerance. Check the extreme limits.

  7. Guaranteeing Part Mating • The hole in the block will always clear the peg if: the virtual size of the hole (the guaranteed free space) is greater than the virtual size of the peg (the largest possible region that may be occupied by the peg).

More Related