1 / 11

Geometric Dimensioning and Tolerancing

Geometric Dimensioning and Tolerancing. Chapter 4 , Feature Control Frames. Review. Chap 1 – Introduction importance of interchangeable parts need to avoid ambiguity in drawings Chap 2 – Symbols & Abbreviations Dimensioning Symbols ; Geometric Characteristics ; Modifying Symbols

ilori
Download Presentation

Geometric Dimensioning and Tolerancing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Geometric Dimensioning and Tolerancing Chapter 4, Feature Control Frames

  2. Review • Chap 1 – Introduction • importance of interchangeable parts • need to avoid ambiguity in drawings • Chap 2 – Symbols & Abbreviations • Dimensioning Symbols ; Geometric Characteristics ; Modifying Symbols • Chap 3 – Datums • datums define coordinate systems from which measurements are taken during part inspection

  3. Introduction • The feature control frame provides a specified control for single or multiple features. • A feature control frame must contain at least a geometric characteristic symbol and a tolerance value.

  4. Geometric Characteristics Explained in detail in Chapters 6 and 8.

  5. Attachment • The placement of the feature control frame governs what information it is conveying surface of cylindrical feature center axis of cylindrical feature

  6. Attachment • 4 placement styles • The feature control frame is placed below a dimension pertaining to a feature. The leader is from the dimension. • A leader from the feature control frame runs to the controlled feature. • A side or end of the feature control frame is attached to an extension line from the feature. The feature surface must be a plane. • A side or end of the feature control frame is attached to a feature-of-size dimension extension line.

  7. Content of a Feature Control Frame • The first compartment is always a geometric characteristic symbol. • The next compartment is a tolerance.

  8. Content of a Feature Control Frame • The next compartments identify datums as needed to define the reference coordinate system. • The feature control frame may contain modifiers.

  9. Read from left to right.

  10. Types of Feature Control Frames • single • combined • feature given a tolerance and then identified as a datum

  11. Evaluation control combined surface geometric characteristic tolerance left right primary line compartments no I O

More Related