1 / 286

Creating Symbols For Multiple Use

Creating Symbols For Multiple Use. Engineering Design Technology Sacramento City College. Objectives. Create and save blocks Insert blocks in drawings Edit a block and update it in a drawing. Insert drawings and blocks into drawings. Create blocks that are saved independent of the drawing.

Download Presentation

Creating Symbols For Multiple Use

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Creating Symbols For Multiple Use Engineering Design TechnologySacramento City College Creating Symbols/Blocks

  2. Objectives • Create and save blocks • Insert blocks in drawings • Edit a block and update it in a drawing. • Insert drawings and blocks into drawings. • Create blocks that are saved independent of the drawing. • Construct and use a symbol library of blocks. Creating Symbols/Blocks

  3. Symbols or “BLOCKS” Creating Symbols/Blocks

  4. Constructing Blocks • A block can be any • Shape. • Symbol. • View. • Drawing • Text • Group of lines. • that you use more than once. Creating Symbols/Blocks

  5. Constructing Blocks • Examples of blocks • Chair • Desk • Plumbing Fixture • Piping Symbol. • Etc. Creating Symbols/Blocks

  6. Constructing Blocks • When preparing drawings • LOOK for items that should be a block • Review the drawing. • Look for any shapes, components, notes, and assemblies that are used more than once. • These can be drawn once and then saved as blocks and re-used over and over again. • Saves time. • Saves $$$ for your company. Creating Symbols/Blocks

  7. Symbols • AutoCAD has two commands for blocks. • Block • WBlock Creating Symbols/Blocks

  8. Symbols • BLOCK – • Creates a block that is stored within the CURRENT drawing ONLY. • Re-use block over and over in THAT drawing. • LOCAL access only. Creating Symbols/Blocks

  9. Symbols • WBLOCK – • Creates a block that is saved as a separate drawing file on your diskette, flash or hard drive • Can be used in any drawing. • Put Blocks in Library on file server. • Can be used by the entire company. • GLOBAL access Creating Symbols/Blocks

  10. Creating Symbols as Blocks • Both typesof blocks can be scaled and rotated to meet the drawing requirements. Creating Symbols/Blocks

  11. Symbols • Both types of blocks can be used to create a symbol library. • A symbol library is a related group of symbols. • Pipe • Furniture • Mechanical symbols Creating Symbols/Blocks

  12. Creating a Block Creating Symbols/Blocks

  13. Creating a Block • Procedure to create a block. • 1. Select the drawing components that should be part of the block. • 2. Name the block. • 3. Indicate the block “handle” or Insertion Point. Creating Symbols/Blocks

  14. The Effect of Layers On Blocks Creating Symbols/Blocks

  15. Drawing the Block Components • Two Methods • 1. Draw blocks on Layer 0 • 2. Draw blocks with components on other layers. Creating Symbols/Blocks

  16. Drawing the Block Components • Method 1 – Created on Layer 0 • The block will have the samecolor, linetype and lineweight as the layer on which it is inserted. • The block will become “part of the family” where it is inserted. • Always create blocks on layer 0. • Usually the preferred method! Creating Symbols/Blocks

  17. Drawing the Block Components • Example 1: • If a block is • Created on Layer “0” and the • INSERT’ed on a layer with these attributes: • RED color • HIDDEN linetype • The block will appear RED and HIDDEN. Creating Symbols/Blocks

  18. Drawing the Block Components • Example 2: • If a block is • Created on Layer “0” and the • INSERT’ed on a layer with these attributes: • GREEN color • CENTER linetype • The block will appear GREEN and CENTER. Creating Symbols/Blocks

  19. Drawing the Block Components • Example 3 • The block components will always have specific color, linetype or lineweight regardless of which layer it is inserted on • OVERRIDE the • Color • Linetype • Of the block entities BEFORE creating the block. Creating Symbols/Blocks

  20. Layers and Blocks • Blocks when created • retain the properties of the layers on which they were created. • Retain the layers on which they were created. Creating Symbols/Blocks

  21. Layers and Blocks • ByLayer is the default creation mode. • When set to “ByLayer”, the block will take on the properties of the layer it is inserted. • Block color and linetype are determined by the layer on which they were created. Creating Symbols/Blocks

  22. Layers and Blocks • If a block named circle was created with • Red color. • Dashed linetype. • When inserted or used on the drawing, it remains red and dashed, no matter what layer it is inserted on. Creating Symbols/Blocks

  23. Layers and Blocks • A block defined in ByLayer mode retains its properties, including layer. • If the layers do not exist in the drawing where the block is being inserted, AutoCAD creates these layers. Creating Symbols/Blocks

  24. Layers and Blocks • A block must be created on layer 0 to assume the properties of the layer it is inserted on. Creating Symbols/Blocks

  25. Layers and Blocks • If a block is created on layer 0, and inserted on layer 1, it becomes part of Layer 1 and assumes Layer 1 properties. • If the block is exploded, the objects return back to layer 0 and to the original color and linetype of Layer 0. Creating Symbols/Blocks

  26. ByLayer vs ByBlock • If the current linetype is set to BYLAYER, • The block is created with the current linetype assigned to that layer. Creating Symbols/Blocks

  27. ByLayer vs ByBlock • If the current linetype is set to BYBLOCK, • The block will assume the current color and linetype when it is inserted into a drawing. Creating Symbols/Blocks

  28. ByLayer vs ByBlock • If the current linetype is set to BYBLOCK, • Objects are created using the CONTINOUS linetype until the objects are grouped into a block. • When the block is inserted into the drawing, those objects acquire the current linetype setting. Creating Symbols/Blocks

  29. ByLayer vs ByBlock • If the current color is set to BYLAYER, • Objects are created with the color assigned to the current layer. • If the current color is set to BYBLOCK • Objects are created using color 7 (white or black) until the objects are grouped into a block. • When the block is inserted into the drawing, it acquires the current color setting. Creating Symbols/Blocks

  30. Changing Block Properties Creating Symbols/Blocks

  31. Changing Block Properties • Use the Properties window to change the properties of a block. • To open the Properties window • Right-click, choose Properties • Or • Double-click entity. Creating Symbols/Blocks

  32. Creating Symbols/Blocks

  33. Forcing Color/Linetypes for Blocks Creating Symbols/Blocks

  34. Drawing the Block Components • Occasionally you will need to create a block with • Specific colors. • Specific linetypes. • A BLOCK can be created with specific colors and linetypes regardless of the layer it is to be used on. Creating Symbols/Blocks

  35. Drawing the Block Components • A user can override the • color • linetype settings • before drawing the objects • Use OBJECT PROPERTIES drop-down box. Creating Symbols/Blocks

  36. Drawing the Block Components • To allow the block to assume the current color and linetype when the block is inserted into a drawing, set the current object color and linetype to ByBlock. Creating Symbols/Blocks

  37. Drawing the Block Components • To set the color to ByBlock, • Pick ByBlock in the Color Control drop-down list of the Object Properties toolbar. • OR • Pick Color... from the Format pull-down menu to access the Select Color dialog box. • OR • Pick the ByBlock button in the Logical Colors area. Creating Symbols/Blocks

  38. Drawing the Block Components • To set the linetype to ByBlock, • Pick ByBlock in the Linetype Control drop-down list of the Object Properties toolbar. • OR • Pick Linetype... from the Format pull-down menu to display the Linetype Manager dialog box. • OR • Pick ByBIock in the Linetype list and then pick the Current button. Creating Symbols/Blocks

  39. Creating Symbols/Blocks

  40. Creating Symbols/Blocks

  41. Creating Symbols/Blocks

  42. Drawing the Block Components • A block created with ByBlock settings assumes the current color and linetype when it is inserted into a drawing, regardless of the current layer setting. Creating Symbols/Blocks

  43. Creating Blocks Creating Symbols/Blocks

  44. To Create A Block • To create a BLOCK: • Pick the Make Block button in the Draw toolbar • OR • Pick Make... from the Block cascading menu in the Draw pull-down menu • OR • Enter B, BLOCK, or BMAKE at the Command: prompt. • Any one of these methods displays the Block Definition dialog box. Creating Symbols/Blocks

  45. Creating Symbols/Blocks

  46. To Create A Block • 1. In the Name: text box, enter a name for the block, such as BORDER. • The name cannot exceed 255 characters. • It can include numbers, letters, and spaces, as well as the dollar sign ($), hyphen (-), and underscore (-). Creating Symbols/Blocks

  47. Creating Symbols/Blocks

  48. Creating Symbols/Blocks

  49. To Create A Block • 2. In the Objects area, pick the Select objects button • Use your pointing device to select objects for the block definition. • Select all the objects that will make up the block. Press [Enter] when you are done. Creating Symbols/Blocks

  50. Creating Symbols/Blocks

More Related