1 / 5

Group 7: Design automated test system for compressor test rig

Suggestion

jana
Download Presentation

Group 7: Design automated test system for compressor test rig

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Group 7: Design automated test system for compressor test rig Nicholas Azadian David Beqiraj Kevin Kanuk

    2. Suggestion #1: Velcro Contains two straps in which one side contains metal hooks while the other contains a metal curl like mesh. Supports normal force but not shear force

    3. Suggestion #2: Thermal Expansion Involves two metal plates in which one side of the plate is flat and the other contains rigid gear like teeth One plate is made of stainless steel and the other is made of aluminum. Both plates are cooled, pressed together, and then heated under constant pressure. Very Expensive

    4. Suggestion #3: Pipe press fitting Involves two pipes of the same diameter and a coupling of a slightly larger diameter. Inner surface of the coupling and outer surface of the pipe contains a rigid surface. Inner diameter of the coupling slowly decreases as you move towards the center. Both pipes are press fitted into the coupling. Round surface of the pipes and coupling reduces the chance of fracture due to the applied load.

    5. Final Decision: Suggestion #3

More Related