Chapter 4 Imperfections: Point and Line Defects

Feb 05, 2012

640 likes | 1.18k Views

Dimensional Range for Different Classes of Defects. Stress Required to Shear a Crystal. Theoretical Shear Strength of Some Materials . Atomic point defects.. Two most common point defects in compounds:Schottky and Frenkel defects.. Point Defects. Interstices in FCC structure. (a) Octahedral void. (b)? Tetrahedral void..

Share Presentation

Embed Code

Link

jaden

Download Presentation

Chapter 4 Imperfections: Point and Line Defects

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

1. Chapter 4 Imperfections: Point and Line Defects

Geometry

Geometry. Point Line Line segment Ray Plane Parallel lines Intersecting lines Angles. Point An exact location in space Line An endless collection of points along a straight path Line segment Part of a line that has two endpoints. . A. Geometry. Ray

661 views • 13 slides

Grain Boundaries

Grain Boundaries. In the last four lectures, we dealt with point defects (e.g. vacancy, interstitials, etc.) and line defects (dislocations). There is another class of defects called interfacial or planar defects : They occupy an area or surface and are therefore bidimensional.

1.63k views • 38 slides

Properties of Point Defects in Semiconductors

Properties of Point Defects in Semiconductors. Dr. Blair R. Tuttle Assistant Professor of Physics Penn State University at Erie, The Behrend College. Semiconductor review and motivation Point defect calculations using ab initio DFT Applications from recent research:

1.81k views • 52 slides

Perpendiculars and Distance

Perpendiculars and Distance. Honors Geometry Chapter 3, Section 6. GeoGebra. Draw a line a, Draw a point off the line, C Add a point on the line, D Draw a segment between C and D Measure the segment Measure the angle BDC, select the points in exactly that order.

202 views • 4 slides

Point defects Line Defects - Dislocations Surface Defects - Grain Boundaries Majority of this chapter is on point defect

Defects in Ceramics. Point defects Line Defects - Dislocations Surface Defects - Grain Boundaries Majority of this chapter is on point defects. . Why bother?. Point defects dictate several properties: Diffusion which then determines sintering and sometimes creep Electrical conductivity

1.9k views • 33 slides

NEEP 541 – Microstructure

NEEP 541 – Microstructure. Fall 2002 Jake Blanchard. Outline. Microstructure Definitions. Defects. Planar Defects Grain boundaries Interphase boundaries Twin boundaries Domain boundaries Stacking defaults Volume Defects Cavities Precipitates cracks. Point Defects Vacancies

670 views • 27 slides

Lines and Line Segments

Lines and Line Segments. Geometry Vocabulary. POINT. A POINT IS AN EXACT POSITION. LINE. A LINE IS A SET OF POINTS THAT IS ENDLESS IN BOTH DIRECTIONS. LINE SEGMENT. A LINE SEGMENT IS A PART OF A LINE IT HAS TWO ENDPOINTS. RAY.

303 views • 11 slides

Chapter 2

Chapter 2. 2-6 rational functions. SAT Question of the day . Lines l and m are perpendicular lines that intersect at the origin. If line l passes through the point (2,-1), then line m must pass through which of the following points? A)(0,2) B)(1,3) C)(2,1) D)(3,6) E)(4,0). objectives.

301 views • 20 slides

Defects in Solids

Defects in Solids. . 0-D or point defects vacancies, interstitials, etc. control mass diffusion 1-D or linear defects dislocations control deformation processes 2-D or planar defects grain boundaries, surfaces, interfaces, heterophase boundaries 3-D or volume defects

587 views • 16 slides

How to construct a line perpendicular to a given line L through point A on L.

How to construct a line perpendicular to a given line L through point A on L. Given Line L through point A. Steps:. 1. Let B be an arbitrary point on Line L. 2 . Construct C on Line L on the opposite side of A such that CA=CB.

266 views • 5 slides

Crystal Defects Chapter 6

Crystal Defects Chapter 6. IDEAL vs. Reality. IDEAL Crystal. An ideal crystal can be described in terms a three-dimensionally periodic arrangement of points called lattice and an atom or group of atoms associated with each lattice point called motif:. Crystal = Lattice + Motif (basis).

1.77k views • 107 slides

3.3 Constructing Perpendicular to a Line

3.3 Constructing Perpendicular to a Line. Objectives: I CAN discover methods of constructing a perpendicular to a line from a point not on the line and from a point on the line. I CAN determine a method of find the shortest path from a point to a line. Serra - Discovering Geometry

301 views • 10 slides

PH0101 UNIT 4 LECTURE-7

PH0101 UNIT 4 LECTURE-7. POINT IMPERFECTIONS LINE IMPERFECTIONS SURFACE IMPERFECTIONS VOLUME IMPERFECTIONS. CRYSTAL DEFECTS AND IMPERFECTIONS. An ideal crystal is a perfect crystal in which each atom has identical surroundings. Real crystals are not perfect.

603 views • 41 slides

Poultry Improvement Project

Poultry Improvement Project . Defects, Uniformity, and Finsh. Defects. Refers to Imperfections of the poultry carcass. Feed in the crop. Bruises Ammonia Burns Blisters on Breast . Blisters on Breast. Birds that have laid in very wet litter may develop blisters on the skin of the breast.

208 views • 9 slides

Weld Defects

Weld Defects. Weld Defects. A defective weldments fails under service conditions. Formation of Welding defects depends upon 1. Mechanical properties of the base metal. 2. Section thickness. 3. Type of loading. 4. The environment etc. .

2.11k views • 21 slides

Parallel Line through Point A

Parallel Line through Point A. Aim: Construct a parallel line through a point off the line. P. Rule a line Mark a point near the line (Leave some space on either side of the line. Aim: Construct a parallel line through a point off the line. Compass point. P.

232 views • 11 slides

Stability and mobility of point defects and point-defect clusters in metals

Stability and mobility of point defects and point-defect clusters in metals. Nicholas Kioussis W. M. Keck Computational Materials Theory Center California State University Northridge. Zhengzheng Chen (CSUN) A. R. Akbarzadeh (CSUN) Nasr Ghoniem (UCLA) Dariush Seif (UCLA)

328 views • 17 slides

Power Point Prepared By

Power Point Prepared By. N K Srivastava KV NTPC Shaktinagar. Class : VII. Topic : Practical Geometry. Construction of a line parallel to a given line , through a point not on the line. Step 1 : Take a line ‘l’ and a point ‘A’ not on ‘l’ .A l.

487 views • 32 slides

The role of imperfections in biological systems

The role of imperfections in biological systems. Jan 2013 Regulatory Genomics Lecturer: Prof. Yitzhak Pilpel. What types of imperfections are there?. Mutations Transcription / translation errors (of what type) Nois expression More?. What could be the potential benefits of imperfections?.

395 views • 25 slides

An angle of 90° at a given point on a line

An angle of 90° at a given point on a line. A powerpoint presentation by Carmelo Ellul Head of Department (Mathematics). A. B. C. An angle of 90° at a given point on a line. Task: C is a point on line AB. Task: C is a point on line AB.

154 views • 3 slides

Chapter 12 Point-to-Point Access: PPP

Chapter 12 Point-to-Point Access: PPP. Point-to-Point protocol PPP stack. Point-to-Point Protocol: PPP. Many Internet users use telephone lines to connect home computers to Internet providers A point-to-point link protocol is required to control and manage the transfer of data PPP defines

593 views • 17 slides

Chapter 5: Defects in Solids

Chapter 5: Defects in Solids. P erfect crystals don’t exist. Many of the important properties of materials are strongly influenced by defects, or even entirely determined by their presence.

1.31k views • 17 slides

More Related