1 / 20

Net 222: Communications and networks fundamentals ( Practical Part)

Net 222: Communications and networks fundamentals ( Practical Part). Tutorial 4 : Chapter 7 Data & computer communications. Stop-and-Wait ARQ. Simplest flow and error control protocol Data frames and ACK frames are numbered alternately (0,1)

ivi
Download Presentation

Net 222: Communications and networks fundamentals ( Practical Part)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Net 222: Communications and networks fundamentals (Practical Part) Tutorial 4: Chapter 7 Data &computer communications Networks and Communication Department

  2. Stop-and-Wait ARQ • Simplest flow and error control protocol • Data frames and ACK frames are numbered alternately (0,1) • When receiver sends ACK1: it acknowledges data frame 0 and is expecting data frame 1, ACK0 acknowledges data frame 1 and is expecting data frame 0 • Sequence Numbers are incremented modulo 2. 1+1 = 0 , and 0+1=1 • Receiver has a counter (R ) which hold the number of the expected frame to be received. R is incremented by 1 modulo 2 when the expected frame is received. • The sender keeps a counter (S ) which holds the number of the last transmitted frame. S is incremented by 1 modulo 2 when the acknowledgement of the last transmitted frame is received and the next frame is transmitted

  3. Normal operation Last transmitted frame Expected frame to be received

  4. Stop-and-Wait ARQ – Cont’d • If the receiver detects an error in the frame it discards it • If the receiver receives an out-of-order frame ( frame 0 instead of frame 1 or vice versa), it knows that the expected frame is lost or damaged and discards the out-of-order frame and resend the previous ACK • The sending device keeps a copy of the last frame transmitted until it receives the right acknowledgment (ACK) for the frame • The sender starts a timer when it sends a frame. If an ACK is not received within the allocated time, the sender assumes that the frame was lost or damaged and resends it

  5. Stop-and-Wait ARQ, lost frame

  6. Stop-and wait ARQ Example Networks and Communication Department

  7. Go-Back-N ARQ • Setup – Sender sliding window • Frames are numbered sequentially using k-bit in the frame header • For k bits frame sequence numbers 0 – (2k –1), repeated • k=3  (0,1,2,3,4,5,6,7,0, 1,2,3,4,5,6,7,…), • k=4  (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,0, 1,2,3,4,5,6,7,8,....15,….), • Sender can send multiple frames while waiting for ACK, but total number of unacknowledged frames should not exceed 2k –1 which is called window • Window is an imaginary placeholder that covers the frames sequence numbers which can be in transit • The frames to the left of the window are already acknowledged and to the right can not be sent until window slides over them • Frames inside the window are outstanding (have been sent but not yet acknowledged OR will be sent soon once received from upper-layer) • Sender window will slide to frame number (i ) when (ACK i) is received. • Sf : first outstanding frame , Sn : next frame to send

  8. Go-Back-N ARQ • Setup –Receiver sliding window • The size of the receiver window is always 1 and points to the next expected frame number to arrive • This means that frames should arrive in order • If the expected frame is received without errors, the receiver window slides over the next sequence number. • Operation • The receiver sends a positive ACK if a frame has arrived without error and in order (with the expected sequence number ) • Receiver does not have to acknowledge each individual frame received correctly and in order. • Receiver can send cumulative ACK for several frames (ACK 5 acknowledges frames (0,1,2,3,4) and expecting frame 5) • If the frame is damaged or out-of-order, the receiver discards it (and stay silent) and also discards all subsequent frames until it receives the one expected. • In this case, no ACK will be transmitted • If the sender timer expires before receiving an ACK, it will resend ALL frames beginning with the one expired until the last one sent (Go-Back-N).

  9. Go-Back-N ARQ, normal operation K=2 Sequence # : 0 – (2k –1), 0  3 Window size: 2k –1 = 3 Window size=1 Sender window will slide to frame number (i ) when (ACK i) is received.

  10. Go-Back-N ARQ Example Networks and Communication Department

  11. Go-Back-N ARQ Example Timeout for frame 1 expired Networks and Communication Department

  12. Selective-Reject ARQ • Setup-Window size (for both sender and receiver) • For k bit sequence number the maximum window size 2k-1 • Operation • Sender in case of damaged or lost frame retransmits • Those which are negatively acknowledged • Those for which timer expires • Receiver can accept out of order frames and buffer (store) them until the lost, damaged, or delayed frame arrives. • Receiver does not acknowledge out of order frames but buffers them only • If the receiver receives an out-of-order, error frame, it will send a frame called Negative Acknowledge (NAK or SREJ)with the number of the frame to be retransmitted only. • NAK improves the performance because it requests retransmission of the lost frame before the corresponding sender timer expires

  13. Selective RejectExample K=3 Sequence # = 0 – (2k –1), 0  7 Window size: 2k-1=4 Window size: 2k-1=4 Networks and Communication Department

  14. Question . In the Go-Back-N ARQ Protocol, we can send several frames before receiving acknowledgments. If a frame is lost or damaged, all outstanding frames sent before that frame are resent. In the Selective- Repeat ARQ protocol we avoid unnecessary transmission by sending only the frames that are corrupted or missing. Both Go- Back-N and Selective-Repeat Protocols use sliding windows. In Go-Back-N ARQ, if k is the number of bits for the sequence number, then the size of the send window must be at most ; the size of the receiver window is always 1. In Selective- Repeat ARQ, the size of the sender and receiver window must be at most Networks and Communication Department

  15. Question A five-bit sequence number can create sequence numbers from 0 to 31. The sequence number in the Nth packet is (N mod 32). This means that the 101th packet has the sequence number (101 mod 32) or 5. Networks and Communication Department

  16. Question Networks and Communication Department

  17. Question Networks and Communication Department

  18. Question Draw the flow diagram of a system using Go back N ARQ protocol for five frames using 4-bits sequence numbers. Assume the fourth frame (frame 3) is lost. size of Sender window: (2k –1) =15 size of receiver window :1 frames sequence numbers: 0 – (2k –1) = 0-15 Networks and Communication Department

  19. Networks and Communication Department

  20. The End Any Questions ? Networks and Communication Department

More Related