1 / 29

Warm-Up

Warm-Up. What is the pH of a 0.00078 M solution of HI ? What is the pOH of a 0.045 M solution of NaOH ? What is the [H+] concentration of a solution of HBr that has a pH of 5.6? What is the pH of a 0.56 M solution of KOH?. Warm-Up. Write formulas for the following acids:

Download Presentation

Warm-Up

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Warm-Up • What is the pH of a 0.00078 M solution of HI? • What is the pOH of a 0.045 M solution of NaOH? • What is the [H+] concentration of a solution of HBr that has a pH of 5.6? • What is the pH of a 0.56 M solution of KOH?

  2. Warm-Up • Write formulas for the following acids: • Hydroiodic Acid • Carbonic Acid • Hydrosulfuric Acid • Nitrous acid

  3. pOH andTitrations Acids and Bases, Day 3 Whitaker 17 December 2013

  4. pOH • Same as pH, but opposite. • Goes from 0 -14 • 0 - 6.99 is basic • 14 – 7.01 is acidic • pOH = -log[OH-] • [OH-]=10-pOH

  5. REMEMBER!! • The molarity of an acid is the Hydrogen (or Hydronium) ion concentration! • The molarity of a base is the Hydroxide ion concentration!

  6. Example • Calculate the pOH for a solution of NaOH with a concentration of 1 x 10-4 M. • pOH = -log[OH-] • pOH = 4

  7. Example • Calculate the pOH for a solution of KOH with a concentration of 0.01 M. • pOH = -log[OH-] • pOH = 2

  8. Example • What is the concentration of a basic solution that has a pOH of 13? • [OH-] = 10-pOH • [OH-] = 1 x 10 -13 M

  9. pH and pOH • As the concentration of [H+] or [OH-] goes up, the other must go down. • pH + pOH = 14

  10. Example • What is the pH of a solution that is found to have a pOH of 10? • pH = 4

  11. Example • What is the pH of a 0.001 M solution of LiOH? • pOH = 3 • pH = 11

  12. Example • What is the pOH of a 0.0001 M solution of HCl? • pH = 4 • pOH = 10

  13. What is the pH of a solution HI with a concentration of .001 M? • What is the concentration of a strong acid with a pH of 3? • What is the pH of a solution of a NaOH with a concentration of 1.0 x 10-6 M?

  14. Objectives • Define aspects of a titration. • Calculate the molarity of a solution using titrations.

  15. Warm-Up • What is the pH of a 0.00078 M solution of HI? • What is the pOH of a 0.045 M solution of NaOH? • What is the [H+] concentration of a solution of HBr that has a pH of 5.6? • What is the pH of a 0.56 M solution of KOH?

  16. Warm-up • What’s the pH of a 0.0001 M solution of NaOH? • What’s the molarity of HCl if the pOH is 13? • If it takes 55 mL of 0.001 M HCl to neutralize 122 mL of a NaOHsolution, what is the concentration of the NaOH solution?

  17. Titrations and Indicators Acids and Bases Whitaker 18 December 2013

  18. Titrations • A titration is a way of determining the molarity of an unknown solution by adding small volumes of a solution with a known molarity. • Involve neutralization reactions.

  19. Neutralization Reaction • Remember that when an acid and base mix, a salt and water are always produced! • Example: • NaOH + HCl -> NaCl + H2O • KOH + HI -> KI + H2O • H2SO4 + 2 LiOH -> Li2SO4 + 2 H2O

  20. Vocabulary of Titrations • The equivalence point - point where exactly enough titrant has been added to react with all of the analyte. • Indicator -a compound that changes color at certain pH’s.

  21. Parts of the Burette Buret containing base or acid Buret clamp Stop-cock Flask Acid or base and indicator

  22. A little more math!!! • In titrations we are looking for the concentration (Molarity) of an unknown solution. • M1V1= M2V2 • Where M1 is the molarity of the acid • V1 is the volume of the acid • M2 is the molarity of the base • V2 is the volume of the base

  23. Example • If it takes 54 mL of 0.1 M NaOH to neutralize 125 mL of an HCl solution, what is the concentration of the HCl? .0432 M

  24. Example • If it takes 25 mL of 0.05 M HCl to neutralize 345 mL of NaOH solution, what is the concentration of the NaOH solution? .0036 M

  25. Indicators!!!

  26. Review • [H30] = [??] • How do acids and bases taste? • What is a strong acid? • What does alkaline mean? • What is the “most basic” pH?? • Under what conditions do gases best dissolve?

  27. Different Types of Acids • Monoprotic • Contains one Hydrogen • HCl • Diprotic • Contains two Hydrogens • H2SO4 • Triprotic • Contains 3 Hydrogens • H3PO4

  28. Changes to Math • When doing titrations, you must account for di- or triprotic acids by adding a 2 or 3 to the acid side.

  29. Example • If it takes 50 mL of 0.5 M KOH solution to completely neutralize 125 mL of sulfuric acid solution (H2SO4), what is the concentration of the H2SO4 solution?

More Related