1 / 13

DC ELECTRICAL CIRCUITS

DC ELECTRICAL CIRCUITS. INDUCTANCE. DC ELECTRICAL CIRCUITS.

inez
Download Presentation

DC ELECTRICAL CIRCUITS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DC ELECTRICAL CIRCUITS INDUCTANCE

  2. DC ELECTRICAL CIRCUITS • When current travels down a conductor it creates a magnetic field around the conductor, this magnetic field induces an EMF onto the wire and will also induce a voltage onto other conductors running in parallel with the current carrying conductor. CURRENT FLOW

  3. DC ELECTRICAL CIRCUITS • Inductance is the ability of a device or circuit to oppose a change in current flow. • Induction is the action of inducing an EMF when there is a change in current. • The unit of measure for inductance is the henry (H) and the symbol for inductance is (L).

  4. DC ELECTRICAL CIRCUITS • Types of inductors;

  5. DC ELECTRICAL CIRCUITS • As you can see in the picture below an inductor can be nothing more than a coil of wire.

  6. DC ELECTRICAL CIRCUITS • The larger the conductor and the more coils it has creates a much larger inductive field, by wrapping the coil around iron the inductance increases greatly

  7. DC ELECTRICAL CIRCUITS • The symbols for inductors is pictured below.

  8. DC ELECTRICAL CIRCUITS • Most DC circuits reach the steady state condition within a fraction of a second after power is applied. • In the steady state condition the current has reached is calculated value per ohms law. • Because of other circuit characteristics the current does not reach steady state value instantaneously, there is a transient time in which the current builds up to its steady state value.

  9. DC ELECTRICAL CIRCUITS • During the time transient, when the current is changing from zero to its specified value, self induction occurs. • Self induction is the action of inducing an EMF into a conductor when there is a change of current in the conductor. • The transient time depends on the value of the inductance and the value of any resistance

  10. DC ELECTRICAL CIRCUITS • To determine the time constant of an inductor the formula is; T = L/R • In a circuit that consist of a .5mH inductor and a 1KΩresistor the time constant is; T = .005H/1000Ω or .000005uS • This means it will take 5uS for the current through the inductor to reach 63.2%

  11. DC ELECTRICAL CIRCUITS • If the maximum current through the circuit is 100A, the current after one time constant is; 100A x .632 = 63.2A • The current must increase another 36.8 amps before it reaches it’s maximum value. • During the second time constant the current increases by another 63.2% of the remaining 36.8A.

  12. DC ELECTRICAL CIRCUITS • The calculation for the second time constant is; 36.8A x .632 = 23.25A Adding this to the first time constant; 23.25 + 63.2 = 86.45A • After five times constants the current through the inductor is considered to be at its maximum value.

  13. DC ELECTRICAL CIRCUITS • Inductors in series; Lt = L1 + L2 + L3 + Ln • Inductors in parallel;

More Related