1 / 21

AIR CONDITIONING SYSTEM DIAGNOSIS

AIR CONDITIONING SYSTEM DIAGNOSIS. CHAP 4 AND 7. OBJECTIVES. Diagnose six system malfunctions by gauge readings. Identify the low and high side of the air conditioning system. Read and understand temperature-pressure charts. Discuss temperature-pressure relationships. OBJECTIVES.

Download Presentation

AIR CONDITIONING SYSTEM DIAGNOSIS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AIR CONDITIONING SYSTEM DIAGNOSIS CHAP 4 AND 7

  2. OBJECTIVES • Diagnose six system malfunctions by gauge readings. • Identify the low and high side of the air conditioning system. • Read and understand temperature-pressure charts. • Discuss temperature-pressure relationships.

  3. OBJECTIVES • Identify differences between CFC-12 and HFC-134a systems. • Identify differences between thermostatic expansion valve (TXV) and fixed orifice tube (FOT) systems. • Understand the proper handling of refrigerants and refrigeration oil.

  4. INTRODUCTION • Figure 4-1, (Pg 68C) shows the dividing line between low and high sides. • Low side gauge is a compound gauge. • There is a direct relationship between pressure and temperature. • Air temp flowing through evaporator will be a few degrees warmer than the refrigerant.

  5. ACSYSTEM Low side Expansion Valve High side

  6. CHECK THESE FIRST • BELT TENSION • CLUTCH OPERATION • RADIATOR/CONDENSER FAN OPERATION • PROPER FLOW FROM DUCTS • SIGHT GLASS IN R-12 SYSTEMS • REFRIGERANT CHARGE • SUCTION LINE • LIQUID LINE • SERVICE VALVES • LINES, HOSES, CONNECTIONS

  7. SYSTEM DIAGNOSIS • Knowing the ambient air temperature. • Determine normal HIGH side pressure. (Pressure chart page 69C) • There are seven conditions for A/C systems. • 1 normal condition. • 6 conditions that indicate a malfunction.

  8. NORMAL OPERATIONAmbient Temperature: 90 degrees Fahrenheit • Low-side gauge: Normal pressure • CFC-12: 32-33 PSI • HFC-134a: 30-31 PSI • High-side gauge: Normal pressure • CFC-12: 185-190 PSI • HFC-134a: 204-210 PSI

  9. PLATE 1 • Normal expansion valve system

  10. PLATE 9 • Normal orifice tube system

  11. INSUFFICIENT COOLING #2 • Low side Gauge: Low Pressure CFC-12 15 psig HFC-134a 12 psig • High Side Gauge: Normal Pressure CFC-12 190 psig HFC-134a 208 psig • Possible Causes: Thermostat (icing) Low side restriction Moisture in system pg 70C

  12. CONDITION #2

  13. INSUFFICIENT OR NO COOLING #3 page 71C • Low Side Gauge: Low or Very low Pressure • CFC-12: 18 psig • HFC-134a : 15 psig • High Side Gauge: Low Pressure • CFC-12: 130-135 psig • HFC-134a: 139-144 psig • Possible causes: Clogged TXV inlet screen, bad valve, Moisture in system

  14. Pg 72C INSUFFICIENT OR NO COOLING #4 • Low side gauge: Low Pressure • CFC-12: 22 psig • HFC-134a: 20 psig • High side gauge: High to extremely High • CFC-12: 250 psig • HFC-134a 281 psig • Causes: Restriction in High Side • Temperature change present at restriction

  15. Pg 73C INSUFFICIENT OR NO COOLING #5 • Low side: High Pressure • CFC-12: 44 psig • HFC-134a: 43 psig • High side: Low Pressure • CFC-12: 140 psig • HFC-134a: 150 psig • Causes: Bad Clutch, Bad compressor • (compressor not turning normally mech... or electrical)

  16. INSUFFICIENT COOLING #6 pg 74C • Low Side: High Pressure • CFC-12: 40 psig • HFC-1334a 38 psig • High Side: Normal Pressure • CFC-12: 170 psig • HFC-134a: 184 psig • Causes: Expansion Valve stuck open

  17. Pg 75C INSUFFICIENT OR NO COOLING #7 • Low Side: High Pressure • CFC-12: 42 psig • HFC-134a: 37 psig • High Side: High to extremely High • CFC-12: 235 psig • HFC-134a: 263 psig • Causes: Air in system, Overcharge, overcharge of oil, Clogged condenser, Non op Fans, Engine overheating

  18. R-22 for LEAK TESTING • R-12 = 50psi • R-22 = 100psi • Do NOT mix refrigerants • R-22 is NOT a replacement for R-12 • Small amounts of R-22 used in leak testing can be vented to atmosphere. • Can Dye Test if needed (pg 197L) page 82C

  19. SERVICING TIPS • A/C oil level should be checked each time the system is drained. • Keep the cap on oil container. • Refrigerant oil is hygroscopic. • Moisture is damaging to A/C system. • Add oil removed from system if a major loss has occurred.

  20. PREVENTIVE MAINTENANCE • Inspect electrical system for A/C • Inspect Blower motor for abnormal noises, leaves in ducts, etc. • Check Voltages • Check Compressor Clutch operation • Check Belts and A/C Hoses • A/C Function Check page 88

  21. Your so Cool, Later Babe!!!

More Related