1 / 6

Calibration Talking Points

Pulser Checking payload channels under construction Timing in all channels Coarse idea of antenna beam patterns Pulsing system during flight On-board gain calibrators What relation of system temperature to V rms for each channel Online monitoring. Calibration Talking Points.

idola
Download Presentation

Calibration Talking Points

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pulser Checking payload channels under construction Timing in all channels Coarse idea of antenna beam patterns Pulsing system during flight On-board gain calibrators What relation of system temperature to Vrms for each channel Online monitoring Calibration Talking Points

  2. Pulse types • Method 1: Fast, broadband pulse • Can get Avtech pulse ~ 200 V pk2pk into 50  • 800 W instantaneous • (eg 40 psec risetime 0.1 to 6 GHz bandwidth) • Good for timing in system (sub-nanosecond) • Power shared among bands • Method 2: • Narrow band pulse with reasonable timing: 2-10 nsec • Can amplify easily to 25 W • (up to 500 MHz, can get to ~1000 MHz?) • Gives more power in band • Not for checking triggering 40 ps r.t. Volts 1 nsec

  3. Could reasonably transmit 25 W into 1000 MHz band Assuming 80km line of sight -80 dBm in 300 MHz thermal noise in 300 MHz bandwidth is -90 dBm So should be visible “Standard gain horn” can transmit broadband pulse with good phase center with 15 dBi directivity. Will be large for 200 MHz. But could test triggering Narrow band pulses can be more easily transmitted and detected. How many ground locations? Transmitting ground to balloon

  4. To determine system temperature of each channel….from physics point of view, says how well we know our threshold Harsh environment could alter our gain & noise levels relative to ground Sets absolute scale of Vrms Prefer switch in load and/or noise diode in front of LNA Need to do this without reducing sensitivity of nominal system If we trust gain & noise of LNA, do this downstream of LNA? Adds complexity. Could instrument this on a few channels and carry it to others based on Vrms from ice in aperture. On board “mini-cal”

  5. Sun: Could map out antenna beam (0.5 deg vs. ~60 deg) Intensity varies on mostly long timescales Should be bright enough to see Moon: Similar size to Sun About 200 K, but does not fill beam. Well known temperature Even using averaging SNR is very small ~10-4 Anyway get this for free with some number of random (“zero bias”) triggers (~0.1 Hz) Other in-flight calibrators

  6. Should be monitoring data from ground Taking “zero-bias” or “minimum bias” data Vrms (Tsys) on each channel Frequency power spectrum for each channel ~1MHz res’n Trigger rates Singles rates per channel Intermediate coincidence rates Trigger rates ~ 5-10 minute time response Online Monitoring

More Related