1 / 16

‘Feeder Blockage Removal Device’ Shane Phillips – Saraji Mine (BMA)

‘Feeder Blockage Removal Device’ Shane Phillips – Saraji Mine (BMA). Presentation Overview. Context for innovation (problem) Solution generation Innovative approach Opportunity for replication Acknowledgements. Context for Innovation.

icrawford
Download Presentation

‘Feeder Blockage Removal Device’ Shane Phillips – Saraji Mine (BMA)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ‘Feeder Blockage Removal Device’ Shane Phillips – Saraji Mine (BMA)

  2. Presentation Overview • Context for innovation (problem) • Solution generation • Innovative approach • Opportunity for replication • Acknowledgements

  3. Context for Innovation • Saraji Mine is one of BMA’s 8 mines operating in the Bowen Basin – producer of high quality coking coal with a production name plate capacity of 8Mtpa • As part of coal processing activities, coal is temporarily stored prior to treatment in the Preparation Plant, on the crushed coal stockpile • Coal is extracted from the crushed coal stockpile and fed onto the Plant feed conveyor via 5 vibratory feeders located under the stockpile • Feeders work to draw coal from the bottom of the stockpile onto the feed conveyor, located in a service tunnel

  4. Context for Innovation • Bridging occurs periodically in the hopper section of the feeders, disrupting the continuous supply of coal onto the feed conveyor • An incident occurred in early 2008 which initiated a review of feeder unblocking practices • Opportunity to review practices that had been in place for +30 years across the Industry and to initiate the development of a ‘hard control’ or ‘engineered solution’ to a long standing safety issue • Feeders located in a difficult operational environment • limited access, high noise/dust/vibration level area

  5. Solution Generation • Blockages previously removed via a manual water lance operated via an inspection hatch on the side of the feed chute section of the feeder • Commenced 3 phase solution generation process: • Developed range of new ‘safe’ hand tools (short term action) • Developed a range of trial high pressure water based lances (medium term action) • Installation and automation of best performing trial lance (long term solution) • Final solution: remotely operated, pneumatic ram driven water lance – removes personnel from the physical hazard associated with previous unblocking methods and the hazards associated with the work environment • Solution fully installed and operational in June 2009

  6. Solution Generation

  7. Solution Generation

  8. Solution Generation

  9. Solution Generation

  10. Solution Generation

  11. Solution Generation

  12. Solution Generation

  13. Solution Generation

  14. Innovative Approach • Benchmarked other Sites and engaged equipment manufacturer in devising final solution – no suggestions forthcoming for easy replication • Solution to problem developed by Operations and Maintenance personnel on-Site • Hand tools and trial water lances constructed using parts that were readily available on-Site • Final solution scope: • Fix device that when not in use was fully retractable and did not impede coal flow through hopper section • Easily removable for repair/maintenance • Able to be automated and operated remotely (ie from Plant Control Room) • Able to use existing infrastructure (ie water supply) • Final design and installation was a relatively low cost solution to a long standing HSEC issue

  15. Opportunity for Replication • Innovation has been shared extensively throughout BMA/BHP Billiton (publications and web-site articles) • Today is our opportunity to share information regarding our ‘Feeder Blockage Removal Device’ with personnel across the Industry for the purpose of replication where applicable • Innovation originally devised for a specific feeder/coal operational scenario, but it has application in any situation in which water or air could be used to remove a blockage or build-up of material • Devices can easily be retrofitted to existing installations, low cost and easily able to be maintained

  16. Acknowledgements • Coal Handling and Preparation Department personnel at Saraji Mine would like to thank the following people and Companies for their assistance in making this project possible: • Department personnel – Glen Althaus, Glenn Deaves, Matt Boswood, Dave Kilpatrick, Warren Borg, Max Fraser, Bob Eldridge • Group Engineering • Advanced Cutting Solutions

More Related