1 / 10

HCAl Sector 1-6 Production Readiness Review: Electronics

HCAl Sector 1-6 Production Readiness Review: Electronics. Eric J. Mannel Oct 8, 2019. HCal Boards. SiPM Daughter Boards: 1440/2000 - Delivered HCal Preamps: 288/320 - Complete HCal Interface Boards: 12/15 - Complete HCal Back Planes: 12/15 - Complete

haroldharris
Download Presentation

HCAl Sector 1-6 Production Readiness Review: Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HCAl Sector 1-6 Production Readiness Review: Electronics Eric J. Mannel Oct 8, 2019

  2. HCal Boards • SiPM Daughter Boards: 1440/2000 - Delivered • HCal Preamps: 288/320 - Complete • HCal Interface Boards: 12/15 - Complete • HCal Back Planes: 12/15 - Complete • LED Driver Boards: 12/15 - Complete • Preamp Output Signal Transition Boards: 18/29 – Complete • Test Pulse Adapter Board: 12/38 - Complete E.J. Mannel, BNL

  3. HCal Cables • Preamp Power Cable: • 24 lengths per module • 6 sets require • First set complete & installed • Parts on order for 5 additional sets • Assembly by NSLS-II Techs (D. Padrazo’s group) • Preamp Thermistor Cable 240/500 : Being assembled • LED Driver Cable • 12 required • Complete • Preamp Output Signal Cable: • 24 lengths per module • 6 sets require • First set complete & installed • Parts on hand for 5 additional sets • Assembly by NSLS-II Techs (D. Padrazo’s group) • HCal Test Pulse Jumper • 6 required • Complete E.J. Mannel, BNL

  4. HCal Preamp Power Cable E.J. Mannel, BNL

  5. HCal Signal Cable E.J. Mannel, BNL

  6. HCal Test Pulse Jumper Cable E.J. Mannel, BNL

  7. Tower Signal Mapping E.J. Mannel, BNL

  8. HCal Signal Cable Mapping E.J. Mannel, BNL

  9. HCal Module Signal Pin Mapping E.J. Mannel, BNL

  10. Final Comments • Design files will be captured in Vault as a single tar file • PDF versions of top/bottom assembly schematics will be posted to DocDB for reference • All electronics is ready to go • Signal and Power cables are in the process of being assembled. • On detector cable routing has been finalized by sPHENIX Techs (Franck T and Sal P) • Still need to do some work on cable labeling E.J. Mannel, BNL

More Related