1 / 30

High gradient test results from X-BOX1

High gradient test results from X-BOX1. Ben Woolley XBOX Team CERN, Switzerland December 2013. Xbox-1 Layout. Clockwise from top-left: Modulator/klystron (50MW, 1.5us pulse) Pulse compressor (250ns, ratio 2.8) DUT + connections Acc. structure (TD26CC). Gallery. Bunker.

gwylan
Download Presentation

High gradient test results from X-BOX1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. High gradient test results from X-BOX1 Ben Woolley XBOX Team CERN, Switzerland December 2013

  2. Xbox-1 Layout • Clockwise from top-left: • Modulator/klystron (50MW, 1.5us pulse) • Pulse compressor (250ns, ratio 2.8) • DUT + connections • Acc. structure (TD26CC) Gallery Bunker

  3. System Layout and diagnostics Pulse forming network D.U.T HLRF Interlock systems Trig. And Clock

  4. Accelerating Structure Diagnostics RF Load RF Load Asymmetric Reflection WR90 Waveguide Ion gauge readout Ion gauge readout Output coupler Input coupler 50 dB directional coupler CLIC Accelerating Structure 3 dB Hybrid Beam-pipe Beam-pipe Incident power Upstream Faraday cup signal Downstream Faraday cup signal Reflected Power Transmitted Power RF Load RF Power From Pulse Compressor

  5. Accelerating Structure Diagnostics Vacuum valve Directional coupler RF hybrid splitter (behind metal support) Ion Gauge Faraday Cup Ion Gauge RF Load Structure input couplers Temperature probe Structure output couplers Ion Pump

  6. Operator display

  7. BD Detection: Breakdown Wilfrid Farabolini Transmitted pulse drops as the arc is established. Reflected power increases to the same order as the incident pulse. Faraday cup voltages are saturated: 100-1000x increase in charge emitted. We can use the difference in time between the transmitted power falling and the reflected power increasing to find the BD cell location. The phase of the reflected signal is used to pinpoint cell location.

  8. Breakdown: Steps taken We stop the next pulse from occurring and wait 2 seconds to let the vacuum level recover. All the signals are logged to file for later analysis. Over 20-30 seconds we ramp the power from zero back to the power set-point.

  9. Cavity Conditioning Algorithm Automatically controls incident power to structure. Short term: +10kW steps every 6 min and -10kW per BD event. Long Term: Measures BDR (1MPulse moving avg.) and will stop power increase if BDR too high.

  10. 100ns 200ns 250ns 150ns Pulse: 50ns 100 MV/m ~2x10-5BrD/pulse 05.12.2013 ~7x10-5BrD/pulse XBOX1 Full-fledged CLIC accelerating structure TD26R05CC build by CERN is successfully processed in XBOX1 up to 107 MW/m unloaded accelerating gradient at 250 ns pulses . We have started now study of breakdown rate evolution at the fixed (100 MV/m) gradient. CLIC

  11. Results: Renormalized pulse width Following CLIC structure design criteria's (A. Grudiev), we expect that at the fixed breakdown rate, the accelerating gradient scales with pulse length as: In the next plot, the processing results were renormalized with respect to 250 ns data.

  12. #668 Total:11168 #1500 ~200 ns

  13. BD cell location: TD26CC

  14. BD cell location: TD24R05

  15. Phase measurements Reflected phase are grouped and separated by 2p/3 • About 25% of BDs see a drift in position: • REF pulse is split in 2 parts that shows 2 different phases • The overall phase change is always negative  BD arc is moving towards the input.

  16. New Developments Dark current signal has been split and sampled at 1.25GSPS. Also we’ve added incident RF signal diode. Used to collect data for stress model analysis of the 100 pulses leading up to a BD event. We have successfully demonstrated that we can produce a CLIC pulse shape using the pulse compressor and the phase programmer. Wilfrid Farabolini

  17. Recent 100MV/m run Large BD triggers period of lower BDR but increases dark current. Also after this period there are less cluster events 45% vs. 25%.

  18. The big picture □ - Measured Values ○ - Rescaled by pulse width × - Rescaled to 100MV/m

  19. Results: TD26CC UP-TIME Uptime~75% Uptime <50% Klystron debugging Re-Calibration of signal paths >1week

  20. Klystron Vacuum + Gun Arcs Klystron gun arcs cause high vacuum for 20-50hrs

  21. Klystron Vacuum + Gun Arcs Gun arc causes erratic readings on the gun ion pump. Possible that IP is damaged. Gun arc discharges to the local ground loop, we see noise on all acquisition signals.

  22. Xbox-1: Future Developments • Try to solve ‘live with’ the klystron arcs. (Possible replacement with 2nd CPI XL5 tube). • Continue to develop phase measurement analysis. • Increase accuracy. • BD cell locations. • BD phase drifts. • Utilise other methods for BD cell location: dark current signals and X-rays emitted during BD. • Soon to have installation of dark current energy spectrometer  Should give better indication of the energies involved in accelerating electrons and ions during a BD. • Quicker/better method of calibration to be devised (less downtime). • Continue conditioning of the TD26CC structure. • Start dog-leg run in March to establish link between BDR and beam loading.

  23. Future Developments: XBOX-2 LLRF Board Fully Tested Functional plan completed PXI hardware purchased and Software partially completed CPI-XL5 tube fully conditioned at SLAC

  24. RF components & RF network integration

  25. Future Developments: XBOX-3 • 4 turn-key 6 MW, 11.9942 GHz, 400Hz power stations (klystron/modulator) have been ordered from industry. • The first unit is scheduled to arrive at CERN in October 2014. The full delivery will be completed before July 2015.

  26. Online automatic adjustment of the compressed pulse (arbitrary) shape.

  27. Summary TD26CC structure is conditioned up to 103MV/m for required CLIC pulse shape and BDR. Gun arcs in the klystron have slowed progress. Work and planning to greatly expand our testing capability is well underway.

  28. Thank you for your attention!

  29. Extra Slides

  30. Future LLRF Generation and Acquisition for X-band test stands 12GHz vector modulated signal to DUT 2.4GHz vector modulated signal 12 GHz BPF IF RF Vector Modulator RFout LOinLOout 2.4 GHz Oscillator LO 9.6GHz BPF X4 freq. Amp 12GHz CW reference signal LO 3dB hybrid 12 GHz BPF RF IF 2.4GHz CW reference signal Oscillators should be phase locked IF LO RF Input 1 IF LO 1.6 GSPS 12-bit ADCs RF Input 2 400 MHzLPFs IF Amps 11.6 GHz BPF X4 freq. IF Amp 2.9 GHz Oscillator LO RF Input 3 Digital IQ demodulation IF 12GHz CW reference signal LO RF_Referance

More Related