1 / 47

Expertise hub for energy-efficient cooling & heating in European supermarkets

Expertise hub for energy-efficient cooling & heating in European supermarkets. HOW TO build a new eco-friendly SUPERMARKET. Scope of this presentation. Give guidelines for building new eco-friendly supermarkets, regarding building design, refrigeration & HVAC

gussie
Download Presentation

Expertise hub for energy-efficient cooling & heating in European supermarkets

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Expertise hub for energy-efficient cooling & heating in European supermarkets

  2. HOW TO build a new eco-friendly SUPERMARKET

  3. Scope of this presentation • Give guidelines for building new eco-friendly supermarkets, regarding building design, refrigeration & HVAC • Introduce state-of-the art energy efficient and eco-friendly refrigeration technologies, focusing on CO2 –only systems • Discuss the different possibilities for heat recovery

  4. table of content

  5. GENERAL INDEX ENERGY EFFICIENT BUILDING DESIGN ENERGY EFFICIENCY IN THE REFRIGERATION SYSTEM COMPONENT ENERGY EFFICIENCY MEASURES ENERGY EFFICIENCY IN HVAC SYSTEMS HEAT RECOVERY ENERGY EFFICIENCY IN LIGHTING

  6. energy efficient building design 01

  7. The building envelope Building envelope determines the heat leakage in/out the supermarket  the refrigeration and heating load ambient Small and compact size, but not claustrophobic Floor space design based on 90 % of the traffic on the busiest day (EPA 2010) Insulation Exemplar values for normative heat transfer coefficients for walls, roof and floor according to the building regulations in different parts of Europe.

  8. The building envelope For the construction, materials with low CO2 emissions throughout the life cycle should be chosen as far as possible • Kiwi-supermarket in Elverum, Norway, used near-produced wood as the main building material • Wooden wall constructions contribute to a good indoor climate and a reduced demand for ventilation, in addition to the low environmental impact https://kiwi.no/Informasjon/Fremtidsbutikken/

  9. Goals • Minimize heat load from the sun • Maximize the utilization of daylight • Minimize heat losses in winter How? • Minimize window area • Optimal window placement • Well-insulating windows A possibility: translucent daylight panels • Highly insulating porous silica aerogel (0.59 W/m²K) • Spread the light diffusively - no hot spots • Light transmission of 45 %. windows Rema 1000 Kroppanmarka Supermarket in Trondheim, Norway http://aerogelnorge.no/norge-rema-1000-kroppanmarka-2/

  10. Vestibule doors Air curtain to prevent mixing of outdoor and indoor air • Heat/cold • Dust, fumes insect • The energy source should be excess heat from the refrigeration system Doors

  11. Interior design Hot products far away from the refrigerated products. Fruit and vegetables close to the cold room to utilize the cold leakage

  12. Energy efficiency in the Refrigeration system 02

  13. 134a R-744 (carbon dioxide) as Working Fluid • Highlighted advantages in applying CO2: • high refrigerant density  • reduced compressor swept volume • small refrigerant lines • high compressor efficiency  • low pressure ratio • high heat transfer coefficients and • low specific pressure drops • (1 bar ~ 1 K) • Challenges / opportunities: • Increase in heat rejection loss • Increase in throttling loss

  14. A supermarket is a complex energy system, having to satisfy chilling and freezing of valuable food at different temperature levels, and at the same time maintaining customer comfort in the sales area. Refrigeration system Temperature levels for refrigeration and AC in a supermarket

  15. Refrigeration system architecture: The CO2evolution 1st generation: Booster system 2nd generation: Booster system with parallel compression 3rd generation: the ejector system

  16. The most widely applied CO2 only solution LT cabinets/evaporators are served by a separate, smaller booster compressor Fits best to cold climates, where the demand for AC is low • Hot climates may need an additional subcooler or evaporative cooling after the gas gooler • Too lowreturntemperatureafter gas coolermayalso be a problem Crucialcomponents • Flash-gas bypass valve • crucial for controlling sparatorpressure • De-superheatersafter LT compressor  Waste heat suitable for DHW production The booster system

  17. The amount of vapour downstream of the high-pressure control valve increases as the external temperature rises. A solution: an auxiliary, parallel compressor • Sucks either a part or the entire amount of vapour from the separator and compress is directly to the gas cooler pressure • Only operative if there is a sufficiently large amount of flash gas • Reduces flash gas losses • Allows integration of AC • The AC evaporator outlet enters directly the separator • AC cooling capacity is provided by the auxiliary compressor, determining the pressure level of the separator Booster system with parallel compression

  18. High-pressure control valve replaced with ejectors • Entrains part of the low-pressure fluid from the MT evaporators using the fluid coming from the gas cooler • Extends the operation time of the parallel compressors • Part of the MT compressor load shifted to the parallel compressor which has to overcome a significantly lower pressure lift • Higher overall COP Particularly important in warm climates where expansion losses are high Enables the use of flooded evaporators • Higher evaporation temperature Control dependent on load: • Multiejector(on-off) [4] • Adjustable area [5] The ejector system - The state of the art technology [4] Banasiak, K., A. Hafner et. al (2015). Development and performance mapping of a multi-ejector expansion work recovery pack for R744 vapour compression units. International Journal of Refrigeration, Volume 57, Pages 265-276 [5] R744.com (2016). CAREL, Carrier join forces to tackle 'CO2 equator'.

  19. Tamb Tamb Tamb Tamb qo qo qo qo DwExp.Dqo= DwExp. -D DwExp.Dqo= DwExp. -D DwExp.Dqo= DwExp. -D DwExp.Dqo= DwExp. -D Ejector principle Ex-Device inlet Utilisation of expansion work (work recovery potential) p = const. Expansion Device inlet The higher the ambient temperature, i.e. inlet temperature to the expansion device, the higher the throttling losses, i.e. the work recovery potential. Temperature [K] To h = const. 0 Entropy

  20. Ejector principle Pressure and velocity inside an ejector Motive flow from gas cooler Exit towards separator Pressure- lift Mixing Chamber Diffusor Suction flow from low pressure receiver Velocity Pressure

  21. ejector system with smart integration of AC No separate AC compressor • AC loop cooled down by evaporating CO2 in natural circulation from the separator • Easier regulation with only two evaporation pressure levels Three-stage gas cooling • Heat recovery • Possibility for regulation through by-passing

  22. Refrigeration SYSTEM: Plug-in units Small, leak tight and cheap, however.. Releases heat directly to the sales area • Increases AC need and energy costs • Should be avoided as far as possible Often synthetic refrigerants • Natural refrigerants (HCs) available from most suppliers • CO­2available from ISA and SANDEN/Hauser Menghini, S. (2016). CO2 Plug-in cabinets for supermarket - the ISA experience. ATMOsphere Europe, Barcelona.

  23. Component energy efficiency measures 03

  24. Frequency control/variable speed drive compressors • Energy savings of up to 25 % • Fewer compressors • Improved performance at part load • Increased working life Compressors

  25. Expansion valves: electronic instead of thermostatic • Adaptive adjustment during operation • Lower pressure difference, more radical decrease in high pressure Expansion valves

  26. A temperature increase by 3 K reduces energy use by ~3 % Higher evaporation temperature can be achieved with • Larger heat exchangers • Internal heat exchanger • Flooded evaporators, enabled by ejector technology Defrosting often based on time shift  Too many defrosting cycles Defrost on demand: by observing the evaporation temperature (the evaporator temperature drops upon defrosting) • Flooded CO2 refrigeration: once a week is sufficient! Evaporators

  27. Condensation temperature/high-side pressure should as low as possible. Gas cooler outlet temperatures can be lowered by using evaporative condenser/gas cooler cooling. • Serial arrangement of gas coolers should be applied with respect to heat recovery and rejection to different heat sinks Periodical cleaning air-cooled heat exchanger surfaces • Improves the heat exchange and hence reduces the energy use Condensers

  28. DISPLayCabinets The most important measure: Glass covers or lids • Product temperature reduced by 4-5 K • Energy need reduced by at least 40 % • Increased food safety Approximate cooling load for an open refrigerated multi-deck cabinet Kauffeld, M. (2015). Current and Future Carbon-saving Options for Retail Refrigeration. Sustainable Retail Refrigeration. J. A. Evans and A. M. Foster, Wiley Blackwell.

  29. High-efficiency fan motors and fan power adjustment Evaporator fan outside the cabinet Anti-condensate heaters on the display doors LEDs inside the cabinet Better insulation material Infrared reflecting shades and baldachins Night covers Improved anti-sweat heaters, edge/rim heating, dew point control Correct product loading ALL cabinets connected to the same compressor MUST be designed for the same evaporation temperature! DISPLayCabinets

  30. Energy efficiency in the HVAC system 04

  31. Air handling unit (AHU) • AHUs designed for supermarkets should be employed • Often AHUs designed for offices used in supermarkets • Necessary features • Heating with waste heat from the refrigeration system (system COP↑) • Permanent magnet (PM) motor with 90 % efficiency, low noise, vibration • Dehumidification (system COP↑) • Bypass possibilities • lower pressure drops Supermarket AHU unit by Systemair, employed in REMA 1000 Kroppanmarka in Trondheim Hafner, A. (2013). CREATIV Energy efficient supermarket - overview and status. CREATIV Consortium Day.

  32. Heat and colddistribution Heating/cold climates: Floor heating • Improved customer comfort • Even temperature distribution in the store (natural air flow direction) • Possibility for zonal temperature control • Thickness of pipes and floor must be considered • Floor has thermal capacity  slow response, but reduces heating peaks Cooling/hot climates: several air coolers distributed in the sales area • Smaller stores: possibility to utilize CO2 directly from the refrigeration system • Beneficial transport properties of CO2 enable reduced pumping power, and lower temperature lift Local space heating and cooling units utilizing CO2 directly from the central refrigeration system as the heating/cooling medium by Enex Girotto, S. (2016). Direct space heating and cooling with refrigerant CO2. ATMOsphere Europe, Barcelona.

  33. HEAT RECOVERY 05

  34. Heat recovery Transcritical CO2 systems are particularly well suited for heat recovery owing to high discharge temperatures Heat sinks (from highest to lowest temperature level): • Hot storage tanks • Domestic hot water (DHW) heating • Supply air in the AHU/air curtain • Floor heating • Snow melting • Energy wells • Charge during summer, discharge during winter • Free cooling to AHU • Stable heat sink for CO2, reducing the Excess heat from supermarket should be utilized in nearby businesses or residential buildings

  35. Heat recovery • CO2 system offers efficient hot water production. • Requires: • Demand for high temperature lift • Low secondary fluid inlet temperature Ref: Nekså

  36. Heat recovery CO2 gas cooler heat recovery in a hot climate, shown in a temperature-entropy (T-s) diagram. CO2 gas cooler heat recovery in a cold climate (with high external heating demand), shown in a temperature-entropy (T-s) diagram.

  37. Heat recovery 1. Red loop: Hot storagetanks, supplying AHU, DHW (and floorheatingifneeded) 2. Blue loop: Floor heating 3. Purple loop: Energy wells 3 temperaturelevels Integrated refrigeration and HVAC solution for REMA 1000 Kroppanmarka supermarket, Trondheim http://geminiresearchnews.com/2014/06/drastic-cut-in-electricity-bill-for-supermarket/

  38. Energy Efficiency in Lighting 06

  39. Corresponds to ~20 % of the supermarket energy demand Important regarding the sales, especially for fresh products Energy efficiency measures • LED-lights   • Lighting control based on the amount of daylight available • Presence detection for areas with lower usage (staff areas, etc.) • Room surfaces painted with matt colors with high reflectance lighting

  40. SUMMARY 07

  41. Energy savingmeasures - summary Energy saving in percentage of aggregated energy consumption of the refrigeration system through different measures • Kauffeld, M. (2015). Current and Future Carbon-saving Options for Retail Refrigeration. Sustainable Retail Refrigeration. J. A. Evans and A. M. Foster, Wiley Blackwell.

  42. Refrigeration system and HVAC • Central, integrated refrigeration and HVAC system with CO2 • Heat recovery considering temperature levels • Energy accumulation in the form of thermal storage • Intelligent system control • AHU unit designed for supermarkets Refrigerated cabinets/rooms • Glass lids/doors • Improved insulation • Infra-red reflecting shades and baldachins • Improved air curtain in open refrigerated multi-decks • Improved anti-sweat heaters, edge/rim heating, dew point control • LED lighting • Correct product loading • Improved fan and/or fan motor Energy savingmeasures - summary

  43. Evaporators • Higher evaporation temperature through • Increased heat exchanger area • Flooded evaporators • Defrost on demand Condensers • Reduced condensation temperature • Floating condensing pressure (adjusted to ambient temperature). • Evaporative condenser/gas cooler cooling • Serial arrangement of gas coolers: 1) heat recovery; 2) heat rejection to ambient; 3) heat rejection towards alternative heat sinks, such as energy wells, water storage tanks, etc. • Cleaning Energy savingmeasures - summary

  44. Fundingopportunities? • Separate documentwithfinancingopportunities for different European countriesavailable in report D2.3 at the homepage of Supersmart: http://www.supersmart-supermarket.info/downloads/

  45. What´snext? Online survey on criteria for the EU Ecolabel on: www.supersmart-supermarket.info Next Labelling Board Assembly in spring 2017 Stay informed and contribute to the criteria development process: • Become a member of an Expert Panel and the Labelling Board of the SuperSmart project. • Sign up for the expert panels and training events at: info@supersmart-supermarket.org

  46. References Axell, M. and P. O. Fahlen (1998). Promotion of energy efficient display cabinets. Joint International Conference of IIR. Bobbo, S., R. Camporese, L. Fedele, M. Scattolin and B. Lamanna (2005). Energetic performance of different 4. expansion valves in a supermarket. Proceedings IIR International Conference on Commercial Refrigeration. Bouchareb, M., J. P. Gibson and F. Lubich (2003). "Drehzahlregulierung von Kälteverdichtern mit intelligenten Frequenzumrichtern - Kostensenkung durch Energieeinsparung und Kühlgutqualitätsverbesserung." KI Luft- und Kältetechnik39(9): 400-404. EnOB, F. f. E. B. (2013). "Energieeffizienter Supermarkt nutzt Tageslicht und Erdreichkälte." EnBauRetrieved 09.05, 2016, fromhttp://www.enob.info/de/sanierung/projekt/details/energieeffizienter-supermarkt-nutzt-tageslicht-und-erdreichkaelte/ EPA (2010). DesigningforEnergy Efficiency. Energy & Store Development Conference, Minneapolis, USA, United States Environmental Protection Agency. Faramarzi, R. (2004). Showcasing energy efficient emerging refrigeration technologies.Emerging Technologies in Energy EfficiencySummit, San Francisco. Gillaux, S. (2016). 100% CO2 solutions for small and medium store formats. ATMOsphere Europe, Barcelona. Goetjes, H. (2007). "Verändern neue AC-Lüfter die Gebäudetechnik?" HK-Gebäudetechnik3: 62-63. Hafner, A. (2013). CREATIV Energy efficient supermarket - overview and status. CREATIV Consortium Day. Hafner, A. and S. Tønseth (2014). Drastic cut in electricity bill for supermarket. Gemini. ISA. (2016). "Panda Co2 Plugin." Retrieved 15.6.2016, from http://www.isaitaly.com/en/refrigeration/chilled-display-cases/upright/panda-co2-plugin.

  47. More References J Sainsbury (2014). Running on rubbish: Supermarket comes off national grid to be powered by food waste alone. http://www.j-sainsbury.co.uk/media/latest-stories/2014/0618-running-on-rubbish-supermarket-comes-off-national-grid-to-be-powered-by-food-waste-alone/. Jorschick, H. (2014). Measurement and Evaluation of Energy Integrated Supermarkets Concept Mater's Thesis, Norwegian University of Science and Technology. Kauffeld, M., J. Harnisch and J.-M. Rhiemeier (2008). Environmental impact of various alternative supermarket refrigeration systems. 8th IIR Gustav Lorentzen Conference, IIR. NREL (2012). Retail Building Guide for Entrance Energy Efficiency Measures, National Renewable Energy Laboratory. Passivhaus Institut (2015). Kriterien für den Passivhaus-, EnerPHit- und PHI-Energiesparhaus-Standard. http://passiv.de/downloads/03_zertifizierungskriterien_gebaeude_de.pdf Philips Electronics (2012). Supermarkets - See what light can do for your customers. P. Electronics. R744.com. (2015b). "SANDEN / Hauser CO2 plug-in system installed at Biocoop21." Retrieved 15.6.2016, from http://www.r744.com/articles/6739/sanden_hauser_co_sub_2_sub_plug-in_system_installed_at_biocoop21. Raghavan, R. and N. Narendran (2002). Refrigerated display cabinet case lighting with LEDs. Solid State Lighting II: Proceedings of SPIE, Troy. Santoso, Y. (2016). Alfamidi’s Actions against Global Warming. ATMOsphere Asia 2016, Tokyo. Trondheim Kommune, M., Grafisksenter (2014). Energispareprisen 2014 tildeles Rema 1000 Kroppanmarka, Trondheim Kommune. Uto, S. (2016). Lawsons’s Actions against Global Warming. ATMOsphere Asia 2016, Tokyo. Zijdemans, D. (2012). Vannbaserte oppvarmings-og kjølesystemer, Skarland Press AS.

More Related