Download
1 / 5
50 likes | 126 Views
MAIN MENU. QUIT X. New Queensland Licensing Pathway. Introduction. SECTION 1 – Conduct routine checks. SECTION 2 – Plan work. Links have been disabled. Use your Enter button or mouse click to move to next screen. SECTION 3 – Check controls and equipment. SECTION 4 – Shift load.
E N D
MAIN MENU QUIT X New Queensland Licensing Pathway Introduction SECTION 1 – Conduct routine checks SECTION 2 – Plan work Links have been disabled. Use your Enter button or mouse click to move to next screen. SECTION 3 – Check controls and equipment SECTION 4 – Shift load SECTION 5 – Shut down equipment CONTACT EASY GUIDES WWW EASY GUIDES ONLINE SECTION 6 – Secure site Click to start
Finding the correct track sag or tension for a specific machine You can find out the correct track sag or tension for a specific machine by looking at the manufacturer’s manual. checking for track sag The manufacturer’s manual will tell you the correct track sag for your machine.
When to wear a safety helmet Wear a safety helmet where there’s a chance that you could be hit on the head. Many sites will have the requirement that you wear a safety helmet while you are there.
Clay is harder than topsoil to excavate, push and spread Clay is harder to excavate, push and spread. SOIL CLAY Larger particles that don’t stick together make topsoil easier to excavate, push and spread. Fine particles that stick together make clay more difficult to excavate, push and spread.
What to do with raised attachments when leaving the dozer Before leaving your dozer you should: 1. Lower all the hydraulically raised attachments to the ground. 2. Remove pressure from hydraulic lines.
