1 / 5

MAIN MENU

MAIN MENU. QUIT X. New Queensland Licensing Pathway. Introduction. SECTION 1 – Conduct routine checks. SECTION 2 – Plan work. Links have been disabled. Use your Enter button or mouse click to move to next screen. SECTION 3 – Check controls and equipment. SECTION 4 – Shift load.

thetis
Download Presentation

MAIN MENU

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MAIN MENU QUIT X New Queensland Licensing Pathway Introduction SECTION 1 – Conduct routine checks SECTION 2 – Plan work Links have been disabled. Use your Enter button or mouse click to move to next screen. SECTION 3 – Check controls and equipment SECTION 4 – Shift load SECTION 5 – Shut down equipment CONTACT EASY GUIDES WWW EASY GUIDES ONLINE SECTION 6 – Secure site Click to start

  2. A multi rubber tyred roller compacts the surface A multi rubber tyred roller compacts the surface by kneading the material with the weight of the roller and rolling of the tyres. multi rubber tyred roller

  3. Travel directly down a slope When travelling a roller across a sloping surface, the safest direction of travel is directly down the sloping surface. This way, there is less chance of the roller becoming unstable (and possibly turning over). GO STRAIGHT DOWN THE SLOPE

  4. WRONG DO NOT leave engine running while unattended NEVER leave an unattended roller engine running. Always switch off the roller when it is not being used.

  5. Removing radiator cap that has not cooled off To remove the radiator filler cap of a roller that has not completely cooled off, slightly loosen cap to release pressure and then slowly remove cap. Make sure that you use gloves and a rag to remove the cap so that you don’t burn yourself.

More Related