1 / 19

D. Bhattacharyya (PI)*, D. Meyer, J. Xu, L. Bachas (Co-PI),

Membrane-Based Nanostructured Metals for Reductive Degradation of Hazardous Organics at Room Temperature. D. Bhattacharyya (PI)*, D. Meyer, J. Xu, L. Bachas (Co-PI), Dept. of Chemical and Materials Engineering and Dept. of Chemistry, University of Kentucky, and S. Ritchie (Co-PI), L. Wu,

gaskill
Download Presentation

D. Bhattacharyya (PI)*, D. Meyer, J. Xu, L. Bachas (Co-PI),

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Membrane-Based Nanostructured Metals for Reductive Degradation of Hazardous Organics at Room Temperature D. Bhattacharyya (PI)*, D. Meyer, J. Xu, L. Bachas (Co-PI), Dept. of Chemical and Materials Engineering and Dept. of Chemistry, University of Kentucky, and S. Ritchie (Co-PI), L. Wu, Dept. of Chemical Engineering, Univ. of Alabama * email: db@engr.uky.edu * phone: 859-257-2794 Project Officer: Dr. Nora Savage, US EPA EPA Nanotechnology Grantees Workshop August 17-20, 2004

  2. Functionalized Materials and Membranes (Nano-domain Interactions) Tunable Separations (with Polypeptides) Hollman and Bhattacharyya, LANGMUIR (2002,2004); JMS (2004) Smuleac, Butterfield, Bhattacharyya, Chem. of Materials (2004) Reactions and Catalysis (nanosized metals, Vitamin B12, Enzymes) Ultra-High Capacity Metal Sorption (Hg, Pb etc) Bhattacharyya, Hestekin, et al, J. Memb. Sci. (1998) Ritchie, Bachas, Sikdar, and Bhattacharyya, LANGMUIR (1999) Ritchie, Bachas,Sikdar, and Bhattacharyya, ES&T (2001) *Ahuja, Bachas, and Bhattacharyya, I&EC (2004)

  3. Why Nanoparticles? • High Surface Area • Significant reduction in materials usage • Reactivity (role of surface defects, role of dopants such as, Ni/Pd) • Polymer surface coating to alter pollutant partitioning • Alteration of reaction pathway (ex, TCE -- ethane) • Bimetallic (role of catalysis and hydrogenation, • minimizing surface passivation) • Enhanced particle transport in groundwater

  4. Synthesis of Metal Nanoparticles in Membranes and Polymers • Chelation (use of polypeptides,poly(acids), and polyethyleneimine) • Capture and borohydride reduction of metal ions using polymer films containing polyfunctional ligands. • Mixed Matrix Cellulose Acetate Membranes • Incorporation of metallic salts in membrane casting solutions for dense film preparation. Formation of particles within the membrane occurs after film formation. • External Nanoparticle synthesis followed by membrane casting • Thermolysis and Sonication • Controlled growth of metal particles in polymeric matrices by decomposition of metal carbonyl compounds thermally or by sonication. • Di-Block Copolymers • The use of block copolymers containing metal-interacting hydrophilic and hydrophobic segments provide a novel approach for in-situ creation of nanostructured metals (4-5 nm) in the lamellar space of self-assembled thin films.

  5. Preparation of supported iron nanoparticles • Synthesis reaction: 5 ml NaBH4 (5.4M) solution drop-wisely N2 in N2 out Mixing Casting Water in oil micelle CA acetone solution Iron naoparticlesin Cellulose acetone solution Washed using methanol Iron nanopartilces Ethanol bath • The weight content of iron is 6.6% by AA (Atomic Absorption).

  6. TEM Characterization of pre-produced iron particles • TEM bright field image of pre-produced iron particles • TEM bright field image of CA membrane-supported iron nanoparticles

  7. Change of chloride ions in aqueous phase (TCE degradation to Cl-)

  8. Cellulose Acetate in Acetone Fe2+/Ni2+ (aq) NaBH4(aq or ethanol) Mixed-Matrix Membrane Preparation Phase Inversion Wet Process (nonsolvent gelation bath) Water or ethanol Dry Process Cellulose Acetate/Fe2+/Ni2+ Mixed-Matrix Membrane Reduction Cellulose Acetate/Nanoscale Fe-Ni Mixed-Matrix Membrane Meyer, Bachas, and Bhattacharyya, Env. Prog (2004)

  9. M2+ + PAA-Na+ M2+-PAA + Na+ COO- COO- COO- Mo: Nanosized Mo in membrane phase Nano-structured Metal Formation and Hazardous Organic Dechlorination with Functionalized Membranes (with simultaneous recapture/reuse of dissolved metals). Metal Reduction (Borohydride or electrochemical) M2+ Recapture with membrane-bound PAA Carboxylic Groups (loss of metals and metal hydroxide pptn. On Mo surface prevented) Mo + PAA PAA:Poly-amino acid Or Poly-acrylic acid Selective Sorption Chlorinated organics in water R-Cl Mo M2+ + 2e- In Membrane R-Cl + H+ + 2e- R-H + Cl-

  10. Nanoparticle Synthesis in Membrane (use of PAA) Nano Fe/Ni or Fe/Pd particles immobilized in membrane Membrane support Cross-section Post coating with Ni or Pd Polyether sulfone (PES) Polyvinylidene fluoride (PVDF) PAA+Fe2++EG Dip Coating NaBH4 solution Ethylene glycol (EG) Polyacrylic acid (PAA) 110 °C 3 hour Uncrosslinked PAA-Fe2+ Crosslinked PAA-Fe2+

  11. A B (A) SEM surface image of nanoscale Fe/M particles immobilized in PAA/MF composite membrane (reducing Fe followed by metal deposition) (100,000); (B) Histogram from the left SEM image of 150 nanoparticles. The average particle size is 28 nm, with the size distribution standard deviation of 7 nm.

  12. Image of Fe/Ni particles Prepared in a TEM Grid (Ni post-Coated) 50.8 nm

  13. Reducing Fe followed by Ni deposition Fe Fe Ni Ni Simultaneous reduction of Fe and Ni STEM-EDS Mapping (using JOEL 2010)

  14. TCE Dechlorination by Fe/Ni and Fe/Pd Nanoparticles in Membrane Metal loading:45mg/40mL Initial TCE: 10µg/ml Fe: Ni= 4:1 (in PES support)

  15. C: TCE concentration kSA: surface-area-normalized reaction rate as: specific surface area m: mass concentration of metal t: time ()Fe/Ni (simultaneous reduction); ()Fe/Ni (Ni deposition on Fe); ()Fe/Ni (solution phase) () Fe/Pd Surface-Area-Normalized Dechlorination Rate (wide variation of kSA showing the importance of surface – active sites and role of hydrogenation) Fe/Ni Fe/Pd Other source kSA* * From B. Schrick, J.L. Blough, A.D. Jones, T.E. Mallouk, Hydrodechlorination of Trichloroethylene to Hydrocarbons Using Bimetallic Nickel-Iron Nanoparticles. Chem.Mater. 2002, 14, 5140-5147.

  16. Effect of Ni content in Fe/Ni particles on KSA Initial TCE: 20mg/L Reaction volume: 110mL Fe/Ni in PVDF support (Posting coating Ni) Fe Ni All experiments were performed in batch systems using nanosized Fe/Ni particles (Post coating Ni) immobilized in PAA/PVDF membrane.

  17. Main intermediates at short time: 2,5,2’-trichlorobiphenyl, 2,2’-dichlorobiphenyl, 2-chlorobiphenyl Metal loading:22mg/20mL Pd = 0.4 wt% Initial organic concentration:8.4mg/L in 50% ethanol/water Reactions of 2,3,2’,5’-Tetrachlorobiphenyl (PCB)with Fe/Pd (~30 nm) in PAA/PVDF membrane

  18. Dechlorination Study under Convective Flow Mode(PVDF-MF membrane & Fe/Pd nanoparticles) • 22 mg Fe/Pd (Pd=0.4wt%) in PAA/PVDF • membrane (4 samples of membranes in stack) • Membrane area = 13.5 cm2 • Membrane thickness = 125m  4 • Membrane Permeability = 210-4 cm3cm-2bar-1s-1 • Pressure:0.3~4 bar 2,2’- Chlorobiphenyl Degradation

  19. Acknowledgements • US EPA- STAR Program Grant # R829621 • NSF-IGERT Program • NIEHS-SBRP Program • Dow Chemical Co. • Undergrads: UK--Melody Morris, Morgan Campbell, Alabama--Cherqueta Claiborn

More Related