1 / 39

Chapter 6 Errors, Error Detection, and Error Control

Data Communications and Computer Networks: A Business User’s Approach. Chapter 6 Errors, Error Detection, and Error Control. Data Communications and Computer Networks Chapter 6. Objectives Identify the different types of noise commonly found in computer networks

garima
Download Presentation

Chapter 6 Errors, Error Detection, and Error Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Data Communications and Computer Networks: A Business User’s Approach Chapter 6 Errors, Error Detection, and Error Control

  2. Data Communications and Computer Networks Chapter 6 • Objectives • Identify the different types of noise commonly found in computer networks • Specify the different error prevention techniques and be able to apply an error prevention technique to a type of noise • Compare the different error detection techniques in terms of efficiency and efficacy • Perform simple parity and longitudinal parity calculations and enumerate their strengths and weaknesses

  3. Data Communications and Computer Networks Chapter 6 • Objectives • Cite the advantages of cyclic redundancy checksum and specify what types of errors cyclic redundancy checksum will detect • Differentiate the three basic forms of error control and describe under what circumstances each may be used • Follow and example of stop-and-wait ARQ, go-back-N ARQ and selective reject ARQ

  4. Data Communications and Computer Networks Chapter 6 • Introduction • Noise is always present. • If a communications line experiences too much noise, the signal will be lost or corrupted. • Communication systems should check for transmission errors. • Once an error is detected, a system may perform some action. • Some systems perform no error control, but simply let the data in error be discarded.

  5. Data Communications and Computer Networks Chapter 6 • Noise and Errors • White noise (also known as thermal or Gaussian noise) • Relatively constant and can be reduced. • Depends on temperature. As temp. increases the noise level increases • If white noise gets too strong, it can completely disrupt the signal.

  6. Data Communications and Computer Networks Chapter 6

  7. Data Communications and Computer Networks Chapter 6 • Removing Noise • From a digital signal – the signal is passed through a signal regenerator • From an analog signal – the signal is passed through filters, not as effective as the signal regenerator

  8. Data Communications and Computer Networks Chapter 6 • Noise and Errors • Impulse noise • One of the most disruptive forms of noise. • Random spikes of power that can destroy one or more bits of information. • Difficult to remove from an analog signal because it may be hard to distinguish from the original signal. • Impulse noise can damage more bits if the bits are closer together (transmitted at a faster rate).

  9. Data Communications and Computer Networks Chapter 6

  10. Data Communications and Computer Networks Chapter 6

  11. Data Communications and Computer Networks Chapter 6 • Noise and Errors • Crosstalk • Unwanted coupling between two different signal paths. • That is, electric or magnetic fields of one telecommunication signal affecting a signal in an adjacent circuit • For example, hearing another conversation while talking on the telephone. • Relatively constant and can be reduced with proper measures.

  12. Data Communications and Computer Networks Chapter 6

  13. Data Communications and Computer Networks Chapter 6 • Noise and Errors • Echo • The reflective feedback of a transmitted signal as the signal moves through a medium • Most often occurs on coaxial cable. • If echo bad enough, it could interfere with original signal • Relatively constant, and can be significantly reduced.

  14. Data Communications and Computer Networks Chapter 6

  15. Data Communications and Computer Networks Chapter 6 • Noise and Errors • Jitter • The result of small timing irregularities during the transmission of digital signals. • Occurs when a digital signal is repeater over and over. • If serious enough, jitter forces systems to slow down their transmission. • Steps can be taken to reduce jitter • Proper shielding to reduce electromagnetic interference and crosstalk • Limit number of times signal is repeated

  16. Data Communications and Computer Networks Chapter 6

  17. Data Communications and Computer Networks Chapter 6 • Noise and Errors • Delay distortion • Occurs because the velocity of propagation of a signal through a medium varies with the frequency of the signal. • Can be reduced by use of techniques that equalise transfer speeds of faster and slower signals • Attenuation • The continuous loss of a signal’s strength as it travels through a medium. Can be eliminated by amplifiers (analog signals) and repeaters (digital signals)

  18. Data Communications and Computer Networks Chapter 6 • Error Prevention • To prevent errors from happening, several techniques may be applied: • - Proper shielding of cables to reduce interference • - Telephone line conditioning or equalization • - Replacing older media and equipment with new, possibly digital components • - Proper use of digital repeaters and analog amplifiers • - Observe the stated capacities of the media

  19. Data Communications and Computer Networks Chapter 6

  20. Data Communications and Computer Networks Chapter 6 • Error Detection • Despite the best prevention techniques, errors may still happen. • To detect an error, something extra has to be added to the data/signal. This extra is an error detection code. • Let’s examine two basic techniques for detecting errors: parity checking, and cyclic redundancy checksum.

  21. Data Communications and Computer Networks Chapter 6 • Parity Checks • Simple parity - If performing even parity, add a parity bit such that an even number of 1s are maintained. • If performing odd parity, add a parity bit such that an odd number of 1s are maintained. • For example, if the character 1001010 is to be sent, using even parity, a parity bit = 1 would be added to the character. • If the character 1001011 is to be sent, using even parity, a parity bit = 0 would be added to the character.

  22. Data Communications and Computer Networks Chapter 6 • Parity Checks • Longitudinal parity adds a parity bit to each character then adds a row of parity bits after a block of characters. • The row of parity bits is actually a parity bit for each “column” of characters. • The row parity bits plus the column parity bits add a great amount of redundancy to a block of characters.

  23. Data Communications and Computer Networks Chapter 6

  24. Data Communications and Computer Networks Chapter 6

  25. Data Communications and Computer Networks Chapter 6 • Parity Checks • Both simple parity and longitudinal parity do not catch all errors. • Simple parity only catches odd numbers of bit errors. • Longitudinal parity is better at catching errors but requires too many check bits added to a block of data. • We need a better error detection method. What about cyclic redundancy checksum?

  26. Data Communications and Computer Networks Chapter 6 • Cyclic Redundancy Checksum • The CRC error detection method treats the packet of data to be transmitted as a large polynomial. • The transmitter takes the message polynomial and using polynomial arithmetic, divides it by a given generating polynomial. • The quotient is discarded but the remainder is “attached” to the end of the message.

  27. Data Communications and Computer Networks Chapter 6 • Cyclic Redundancy Checksum • The message (with the remainder) is transmitted to the receiver. • The receiver divides the message and remainder by the same generating polynomial. • If a remainder not equal to zero results, there was an error during transmission. • If a remainder of zero results, there was no error during transmission.

  28. Data Communications and Computer Networks Chapter 6

  29. Data Communications and Computer Networks Chapter 6 Error Control Once an error is detected, what is the receiver going to do? 1. Do nothing 2. Return an error message to the transmitter 3. Fix the error with no further help from the transmitter

  30. Data Communications and Computer Networks Chapter 6 Error Control Do nothing Seems like a strange way to control errors but some newer systems such as frame relay perform this type of error control. Return a message has three basic formats: 1. Stop-and-wait ARQ (Automatic Repeat reQuest) 2. Go-back-N ARQ 3. Selective-reject ARQ

  31. Data Communications and Computer Networks Chapter 6 • Error Control • Stop-and-wait ARQ is the simplest of the error control protocols. • A transmitter sends a frame then stops and waits for an acknowledgment. • If a positive acknowledgment is received, the next frame is sent. • If a negative acknowledgment is received, the same frame is transmitted again.

  32. Data Communications and Computer Networks Chapter 6

  33. Data Communications and Computer Networks Chapter 6 • Error Control • Go-back-N ARQ is a more efficient protocol. • It assumes that multiple frames are in transmission at one time. • If a frame arrives in error, the receiver can ask the transmitter to go back to the Nth frame and retransmit it. • After the Nth frame is retransmitted, the sender resends all subsequent frames.

  34. Data Communications and Computer Networks Chapter 6 • Error Control • Selective-reject ARQ is the most efficient error control protocol. • If a frame is received in error, the receiver asks the transmitter to resend ONLY the frame that was in error. • Subsequent frames following the Nth frame are not retransmitted. • Figure 6-10 shows a normal transmission of frames with no errors, while Figures 6-11 and 6-12 show examples of errors.

  35. Data Communications and Computer Networks Chapter 6

  36. Data Communications and Computer Networks Chapter 6

  37. Data Communications and Computer Networks Chapter 6

  38. Data Communications and Computer Networks Chapter 6 • Error Control • For a receiver to correct the error with no further help from the transmitter requires a large amount of redundant information accompanying the original data. • This redundant information allows the receiver to determine the error and make corrections. • This type of error control is often called forward error correction.

  39. Data Communications and Computer Networks Chapter 6 • Error Detection and Error Control in Action • Asynchronous transfer mode (ATM) incorporates many types of error detections and error control. • ATM inserts a CRC into the data frame (the cell). • This CRC checks only the header and not the data. • This CRC is also powerful enough to perform simple error correction on the header. • A second layer of ATM applies a CRC to the data, with varying degrees of error control.

More Related