1 / 23

A Low Supply Voltage CMOS Bandgap And Sub-threshold Voltage Reference

A Low Supply Voltage CMOS Bandgap And Sub-threshold Voltage Reference. EE610 Course Project. Anurag Sindhu(Y5106) Ashish Bhatia (Y5121). Basic Idea. For generating a temperature independent voltage reference, we need Voltage with negative TC (Temp Coeff.) : V 1

gaetan
Download Presentation

A Low Supply Voltage CMOS Bandgap And Sub-threshold Voltage Reference

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Low Supply Voltage CMOS Bandgap And Sub-threshold Voltage Reference EE610 Course Project Anurag Sindhu(Y5106) Ashish Bhatia (Y5121)

  2. Basic Idea • For generating a temperature independent voltage reference, we need • Voltage with negative TC (Temp Coeff.) : V1 • Voltage with positive TC : V2 • A circuit to linearly combine them(a1V1 + a2V2) such that net voltage has (almost) zero TCδ(a1V1 + a2V2) /δT = 0

  3. Negative TC Voltage • VBE of BJT decreases with temperature

  4. Positive TC Voltage • VBE1 – VBE2 = VT ln(Jc1/Jc2) = VPTAT increases with temp if Jc1 >Jc2 • In our case Jc1/Jc2 = (Ic1*A2)/(Ic2*A1) = 10*10 = 100 • => VBE1 – VBE2 = 120 mV (approx) at 300K

  5. Voltage to Current Conversion I = k(VBE1-(VBE2-VTHP2)-VTHP1)2 = k(VBE1-VBE2) 2 …(1)

  6. Current to Voltage Conversion (with Amplification) 5I = 0.2k(VBG-(VBE2-VTHP2)-VTHP6)2= 0.2k(VBG-VBE2)2 …(2)

  7. I = k(VBE1-VBE2)2 …(1) 5I = 0.2k(VBG-VBE2)2 …(2)Solving (1) and (2)VBG = VBE2 + 5(VBE1-VBE2)

  8. I = k(VBE1-VBE2)2 …(1) 5I = 0.2k(VBG-VBE2)2 …(2)Solving (1) and (2)VBG = VBE2 + 5(VBE1-VBE2) decreases with Temp 2mV/K increases with Temp 0.4 mV/K

  9. 5I 2I 5I 10 I 10 I 11 I I I I I I I M9 M10 M11 M12 Mc M1 M2 M6 Q2 M7 M8 M4 M3 Q1 M5

  10. Our Innovation • To generate dual voltage references • Bandgap reference (1.157 V) • Sub-threshold reference (326 mV)

  11. Circuit for sub-threshold reference M13 and M14 acts as Voltage Divider to producesub threshold output = 326 mV

  12. Complete Circuit

  13. Simulation Results

  14. Vmax = 1.158 VVmin = 1.140V Variation = 18 mV (from -25C to 75C)

  15. Vmax = 327.5 mVVmin = 315.5 mVVariation = 12 mV (from -25C to 75C)

  16. Vmax = 1.104 mVVmin = 1.084 mV Variation = 20 mV (Vdd varying from 1.3 to 1.5V)

  17. Vmax = 308 mVVmin = 292 mV Variation = 16 mV (Vdd varying from 1.3 to 1.5V)

  18. Advantages • Does not use Resistance or Op Amp => can be fabricated on any Digital CMOS technology • Dual Voltage reference available => can be used in low power systems • Devices operate at sub-threshold voltage during low computation periods • Jump to saturation mode during high computation periods

  19. Main Challenge • Short Channel Transistors do not follow square law characteristics => adjustment to ideal W/L values, through iteration for getting desired current

  20. References • “A Low-Supply-Voltage CMOS Sub-Bandgap Reference”, Adriana Becker-Gomez, T. Lakshmi Viswanathan, T. R. Viswanathan, IEEE Transactions On Circuits And Systems—II: Express Briefs, Vol. 55, No. 7, July 2008 • “Design of Analog CMOS Integrated Circuits”, Behzad Razavi, Tata McGraw Hill Publishers (Edition 2002)

More Related