1 / 5

Gothic arch break-down chairs Original chairs by Sir Kragon, original plans by Master Terafan and now modified by Barún

Gothic arch break-down chairs Original chairs by Sir Kragon, original plans by Master Terafan and now modified by Barún Pól Ó Briain. 40”. 41”. 10”. 11”. 20.5”. 24”. to make this chair back. 1 of each of these, glued together. Arm Rise (Cut/assemble two per chair).

foster
Download Presentation

Gothic arch break-down chairs Original chairs by Sir Kragon, original plans by Master Terafan and now modified by Barún

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Gothic arch break-down chairsOriginal chairs by Sir Kragon, original plans by Master Terafan and now modified by Barún Pól Ó Briain

  2. 40” 41” 10” 11” 20.5” 24” to make this chair back 1 of each of these, glued together

  3. Arm Rise(Cut/assemble two per chair) Seat(Cut one per chair) 24” 20.5” 16” 21.5” 16.5” 5” 26” 1.0” .75” 29” 1.5” 18” 8” 1.0” Three times the thickness of the sides The thickness of the sides 16.5” Front of Seat Chair Legs(Cut two per chair) Detail of the tabs The left space (shaded area) is the thickness of the sides of the chairs. (I used ¾” plywood.)

  4. 10” 21.5” Position the seat slots so the rear of the seat is 1” lower than the front. Make the line of the slots for the back perpendicular to the seat, (dashed line) 16.5” 5” 29” 26” ½” 18” 17” 8”

  5. How to layout on 4’ X 8’ sheets of Plywood 18mm or ¾” Plywood 12mm or ½” Plywood

More Related