1 / 7

Ch. 13 Study Guide

Ch. 13 Study Guide. B. Plot the Production Function D. and TC curve. 2c. What happens to the MPL as more workers are added to the production facility? Why? Use this information about the MPL to explain the slope of the production function. MPL decreases as more workers are added

flavio
Download Presentation

Ch. 13 Study Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ch. 13 Study Guide B. Plot the Production Function D. and TC curve

  2. 2c. What happens to the MPL as more workers are added to the production facility? Why? Use this information about the MPL to explain the slope of the production function. • MPL decreases as more workers are added • Each worker has to share fixed inputs • As input increases, Q increases but at a slower rate and the slope of production function gets flatter

  3. 2e. Explain the shape of the TC curve • As Q increases, and DMP sets in, the TC gets steeper. • In order to produce more Q, the firm must employ greater amounts of input and costs rise at an increasing rate.

  4. 3b. Plot AFC, AVC, ATC, and MC

  5. 3c Explain the shape of curves in 2b • AFC- FC divided by increasing Q so always falling • AVC, ATC, MC : all fall and then rise because of increasing MP followed by decreasing MP • ATC: high at low levels of Q b/c of FC is spread over only a few units; will drop as Q increases; ATC rises because even as AFC falls, AVC rises substantially

  6. 3d. Explain relationship between ATC and MC • When MC < ATC, ATC falling • When MC > ATC, ATC rising • MC crosses ATC at min of ATC = Efficient Scale • 3e. Explain ATC, AFC, AVC • ATC = AFC + AVC • Distance between ATC and AVC = AFC; and that distance is always getting smaller

  7. 3f What is Bob’s efficient scale? How to find?

More Related