1 / 9

Spezielle Anwendungen des VLSI – Entwurfs Applied VLSI design

Spezielle Anwendungen des VLSI – Entwurfs Applied VLSI design. Course and contest Results of Phase 3 Sebastian Kruse. Optimizations. Change of coefficent Now no adder is needed for calculation Look for higher metric at lower voltage area Comparison between different adder types.

Download Presentation

Spezielle Anwendungen des VLSI – Entwurfs Applied VLSI design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SpezielleAnwendungen des VLSI – EntwurfsApplied VLSI design Course and contest Results of Phase 3 Sebastian Kruse

  2. Optimizations • Change of coefficent • Now no adder is needed for calculation • Look for higher metric at lower voltage area • Comparison between different adder types

  3. Carry Skip Adder • Delay time of O() • Variable block size • Area compared to RCA: CLA CLA CLA CLA CLA CLA 0 1 0 1 0 1

  4. Han Carlson / Brent Kung • Han Carlson • Brent Kung Source: Binary Adder Architectures for Cell-BasedVLSI andtheirSynthesis, Prof.Dr. W. Fichtner, 1997

  5. Comparison between FPGA and ASIC • FPGA { Frequency / Area} • Carry Skip: 324.044 MHz / 143 LUT • Ripple Carry: 426,439 MHz / 109 LUT • Han Carlson: 332,779 MHz / 128 LUT • Brent Kung: 293,083 MHz / 135 LUT • ASIC { Frequency / Pdyn/ Pleak } • Carry Skip: 356 MHz / 3,156 nW / 19,330 nW • Ripple Carry:390 MHz / 3,135 nW / 19,185 nW • Han Carlson: 356 MHz / 3,146 nW / 19,241 nW • Brent Kung: 356 MHz / 3,148 nW / 19,244 nW

  6. Filter response • FPGA ASIC

  7. Results • Used parameters for synthesis in Synopsys: • set frequency 0.001 • compile_ultra • set_max_leakage_power 0 mw • set_max_dynamic_power 0 mw • set_wire_load_mode top

  8. Future improvements • Change type of adder (phase 3) • Brent Kung adder • Han Carlson adder • Carry skip adder • Only do an addition for important digits • Summation compression (Wallace tree) • Carry save representation

  9. Thank you for your attention!

More Related