1 / 10

CHEM 355

CHEM 355. ADVANCED BIOCHEM. PLANT PIGMENTS. GO TO STATION WITH SAFETY SHEET WORK IN PAIRS TODAY. 2-4 LEAVES -viable/not dryed. Mortar& Pestle 0.5g sand & 15mL acetone. ISOLATE PIGMENT. MACERATE GRIND. BE QUICK ACETONE’S VERY VOLATILE. +anhydrous Na2SO4. MEASURE VOLUME. FILTER.

Download Presentation

CHEM 355

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHEM 355 ADVANCED BIOCHEM

  2. PLANT PIGMENTS • GO TO STATION WITH SAFETY SHEET • WORK IN PAIRS TODAY

  3. 2-4 LEAVES -viable/not dryed Mortar& Pestle 0.5g sand & 15mL acetone ISOLATE PIGMENT MACERATE GRIND BE QUICK ACETONE’S VERY VOLATILE +anhydrous Na2SO4 MEASURE VOLUME FILTER ZERO SPECTROMETER (acetone) FILL CUVETTE (GLASS) DILUTE IF NECESSARY (A>1) SCAN 400-700ηm & NEED ABSORBANCE λ =661.6,644.8,470 ηm FOR CALCULATION SCAN

  4. CONCENTRATE SAMPLE SEPARATE PIGMENTS & SCAN AGAIN APPLY EXTRACT TO PAPER DRAW & MEASURE Rf CHROMATOGRAPHY SOLVENT (9:1) PET ETHER:ACETONE CUT APART BANDS +TEST TUBES +acetone REPEAT IF NECESSARY CORK & LET SIT ~10MINS EXTRACT FROM PAPER INTO ACETONE STIR/SHAKE SCAN 400-700ηm RECORD ABSORBANCE MAX & λ DILUTE IF NECESSARY (A>1)

  5. ACID BASE PROPERTIES OF AMINO ACIDS • WORK IN PAIRS • PLOT AS YOU GO –(+ table) • VISUALIZE IT WITH A GRAPH! • WRITE DOWN SAMPLE INFO (ID , concentration, HCl, H2O)

  6. STANDARDIZE BASE WITH HCl CALCULATE BASE MOLARITY USE FOR CALCULATIONS CALIBRATE pH METER OBTAIN UNKNOWN AMINO ACID *NOTE SAMPLE ID & CONC Bring pH around 2 (1.8-2.3) Add 5 mL of HCl 0.1M (or more) CHECK pH BASE TITRATION PLOT AS YOU GO New

  7. VITAMIN A • WORK IN PAIRS • ENSURE SAPONIFICATION IS COMPLETE • PREPARE COLUMN – during saponification –watch for air bubbles -don’t let the column dry out • LOOK AT LABELS – what’s in the margarine (ingredients & concentration)

  8. OLIGONUCLEOTIDE SYNTHESIS • WORK IN PAIRS • Solvents – check labels • in fumehoods – watch your solvents! • λ = 504 ηm

  9. MILK PROTEINS – 2weeks • WEEK 1 -WORK IN PAIRS • CASEIN ISOLATION • PREPARE COLUMN FOR WHEY ISOLATION NEXT WEEK • SEAL WITH PARAFFIN • LEAVE ON BACK COUNTER WITH BEAKER BELOW

  10. MILK PROTEINS – 2weeks • WEEK 2 • WORK IN PAIRS • WHEY ISOLATION • CAREY or FIBRE OPTIC PROBE • TAKE ABSORBANCE READINGS AS YOU GO – DON’T WAIT TILL END

More Related