1 / 20

Quality Control In Measurements

Quality Control In Measurements. Tom Colella CLAS Goldwater Environmental Lab. Quality Control In Measurements. Measurement Comparison of unknown to known standard Validity depends on quality of standard Usually indirect, using calibrated system. Quality Control In Measurements.

emmett
Download Presentation

Quality Control In Measurements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Quality Control In Measurements Tom Colella CLAS Goldwater Environmental Lab

  2. Quality Control In Measurements • Measurement • Comparison of unknown to known standard • Validity depends on quality of standard • Usually indirect, using calibrated system

  3. Quality Control In Measurements • Calibration • What? • Response of measurement system related to amount of analyte • Why? • Eliminate BIAS • When? • Depends on nature of measurement system & frequency of use

  4. Quality Control In Measurements • Calibration Standards... • General Considerations • Purity • Stability • Storage • Homogeneity • Representativeness

  5. Quality Control In Measurements • Calibration Standards... • Stock Standard Preparation • Use calibrated equipment (Class M/A, TC/TD) • Consider stability vs. dilution error • Work in appropriate measurement range

  6. Quality Control In Measurements • Calibration Standards... • Matrix Matching • Prepare standards in same matrix as sample • Applies to extracts, digests, preservation, synthetic (lab) samples • NOT possible for natural samples

  7. Quality Control In Measurements • Calibration Standards... • Process in sample preparation or use process controls

  8. Quality Control In Measurements • Calibration Standards... • Range and distribution • Select high and low standards • Bracket samples with standards • Determine # of standards • Distribute evenly throughout range • Do not extrapolate

  9. Quality Control In Measurements • Calibration Standards... • External Standards • Same analyte prepared and measured separately from samples • Used to generate cal curve or response factor

  10. Quality Control In Measurements • Calibration Standards... • Internal Standards • Related analyte added to each calibrant, sample, QC; measured simultaneously • Corrects errors due to variation in measurement technique • Must behave similar to analyte • Use with instruments that measure multiple analytes simultaneously

  11. Quality Control In Measurements • Calibration Standards… • Method of Standard Additions • Form of internal calibration • Corrects matrix interference errors due to mismatch • Analyte of interest is added to samples at different levels • Concentration = negative x intercept

  12. Quality Control In Measurements • Calibration Standards.. • Calibration acceptance criteria • Response Factors • % CV • Calibration Curves • Correlation Coeff. Conc.Signal Response Factor 10 ppb 1025 V 102.5 V/ppb 20 1980 99.0 30 2890 96.3 40 4103 102.6 CV = 3.0%

  13. Quality Control In Measurements • QC Samples • Categories of error • Contamination • Calibration Drift • Bias • Imprecision

  14. Quality Control In Measurements • QC Samples... • Contamination • Field Blanks • Trip Blank • Equipment Blank

  15. Quality Control In Measurements • QC Samples... • Contamination • Lab Blanks • Storage Blank • Instrument Blank • Method Blank

  16. Quality Control In Measurements • QC Samples... • Calibration Drift • Initial Calibration Verification (ICV) • Continuing Calibration Verification (CCV)

  17. Quality Control In Measurements • QC Samples... • Bias • Spikes • Lab Fortified Matrix (LFM, “Spike”) • Trip Spike

  18. Quality Control In Measurements • QC Samples... • Bias • External Source QC (QCS, LFB, CRM) • SPEX, VHG, ERA, Ultra, NIST

  19. Quality Control In Measurements • QC Samples… • Bias • Surrogates

  20. Quality Control In Measurements • QC Samples… • Imprecision • Replicates - Combine with External Source QC (LFM)

More Related