1 / 58

ACS850-04 New Industrial Drive Module

ACS850-04 New Industrial Drive Module. Petri Torniainen 12.5.2009. ACS850-04. Table of Contents. What is ACS850-04 HW features SW features Control connections Options PC Tools Documents Sales arguments. ACS850-04. ABB Industrial Drive.

emahoney
Download Presentation

ACS850-04 New Industrial Drive Module

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ACS850-04New Industrial Drive Module Petri Torniainen 12.5.2009

  2. ACS850-04 Table of Contents • What is ACS850-04 • HW features • SW features • Control connections • Options • PC Tools • Documents • Sales arguments

  3. ACS850-04 ABB Industrial Drive • Very flexible drives that are easy to be configured to meet the needs of various industries and applications • ABB Industrial drives are designed especially for applications in process industries such as: • Pulp & paper • Metals • Mining • Cement • Chemical • Oil & gas • Examples of applications: • Cranes • Winders • Extruders • Mixers • Wire drawing machines • Separators • …

  4. ACS850-04 Drive modules • ACS850-04 is a drive module designed to be built into a customer’s own cabinet

  5. Global LV Drive Market 70% of total drives market is under 75 kW Market Shares by Power Range (MUSD, Y2006)

  6. ACS850-04 Market strategy - targets • Growth • In the new industries and applications • Low power market • In the module market • Strengthen position in the existing markets

  7. ACS850-04 ACS850-04, Highlights • Easy and cost efficient cabinet assembly • Flexible hardware and software • Advanced diagnostics and maintenance assistant • Intuitive to use • Built-in Safe Torque Off (STO) • Memory unit for easy drive management • Improved DTC, high performance motor control • Advanced energy saving features

  8. ACS850-04 Technology • Frames A and B: 1,1 – 7,5 kW • Frames C and D: 11 – 45 kW • DC-choke integrated as standard • Optional built-in EMC filter • Frames E0, E and G: up to 500 kW • New control unit JCON-11 (comes during Q2/2009) • In the beginning the control unit is JCON-01 • IO-options: F-series modules • Control and application technology: new fw that is partly based on the existing platforms • Control panel: ACS-CP-U +

  9. HARDWARE

  10. Hardware 500 1,1 kW 500 380 V Basic technical data • Power range: 1,1 – 500kW • 1.1 - 400 kW at 400V • Voltage range: 380 – 500V • 380 – 480 V in the beginning • 500 V: target for release Q2/2009 IP20; frames A-E IP00; frame G

  11. Hardware Hardware in brief • Optimized product for cabinet assembly • Side-by-side mounting • Compact, narrow design • Power terminals on top (up to 45 kW) enabling compact and EMC compliant installation • Plug-in terminals • I/O terminals • Power terminals up to 11 kW • 2 option slots for I/O extensions and encoders and 1 dedicated slot for fieldbus

  12. Hardware Hardware in brief • Cover for the control unit • Consists of two parts • If TTL encoder or resolver modules are used, the lower part of the cover to be left out (no space for the connector) • The control panel holder is available as an option • Can be attached either to the control unit cover or cabinet door • Coated boards as standard • Fan supervision (≤ 45 kW) • Supervises, if the fan is rotating or not

  13. Hardware Ambient conditions • Temperature: • - 10°C - 55°C • G frame up to 50°C • Derating above 40°C • Relative humidity: • Max. 95%, no condensation allowed • Altitude: • up to 4000 m • At 500V up to 2000 m • 1%/100 m derating above 1000m • Vibration: • Class 3M4 acc. to EN60721-3-3 • Climatic / environmental conditions: • Class 3K3, 3C2 acc. to EN60721-3-3

  14. Hardware Ratings • Similar kind of ratings as in ACS800, but new names: ACS850-04ACS800 I2N continuous nominal rating without overload Icontmax ILd light duty IN (110% OL for 1 min.) IHd heavy duty Ihd (150% OL for 1 min.) IMax maximum allowed current Imax Note: IMax is always available for 10 sec at start and after that depending on the drive temperature • Reasons for the new naming policy: • Uniform naming policy throughout the LV AC Drives • More logical than the naming policy today • More in line with competitor offering (e.g. Siemens)

  15. Hardware Ratings (frames A-D) Motor powers at 400 V supply voltage

  16. Hardware Ratings (frames E0-G) 1 Overloadability at 40°C 40% 2 Overloadability at 40°C 30% Motor powers at 400 V supply voltage

  17. Hardware Derating • Voltage derating: no derating needed from 400 V to 500 V • Temperature derating: 1%/1°C • Altitude derating: 1%/100m

  18. Hardware Dimensions and mounting * standard, no options

  19. Hardware Cable lengths • Max cable lengths: • Max. length of the STO cable is 25 m • Longer cable can be made by using extra relays • Max. length of the D2D link is 50 m

  20. SOFTWARE

  21. Software LOC MAIN MENU 2 PARAMETERS ASSISTANTS CHANGED PAR EXIT 16:31 ENTER LOC ASSISTANTS 2 Start-up Assistant Motor Set-up Application Speed control EXT1 Speed control EXT2 EXIT 16:31 SEL Software • Easy start-up • Macros: preprogrammed parameter settings • Start-up Assistant • Easy use • Intuitive parameter structure • Short/long parameter menus • I/O “mapping” • List of changed parameters • Flexibility • Extensive parameter settings • Limited block programmability as standard

  22. Software LOC HELP Check: Excessive motor load, insuff. accel time, faulty motor, motor cables or connections. EXIT 16:31 OK LOC OVERCURRENT 01 FREQ AT FLT 10.8 Hz SPEED AT FLT 326 rpm TORQUE AT FLT EXIT 16:31 DIAG Software • Other added value features • Maintenance assistant • Reminds the user of the need of maintenance • Diagnostic assistant • Helps in locating the cause of the disturbance • Helps in restoring the problem • Advanced energy saving features • Energy efficiency optimizer • kWh/€/CO2 counter • Saved energy counter • Covering protections • Advanced thermal protection of IGBTs • Extensive preset and programmable protections

  23. Software 500 0 Hz Improved DTC • DTC with enhanced features • No. 1 motor control on the market • Standard sw supports Asynchronous motors and Permanent magnet motors • Output frequency up to 500 Hz • Improved stand still ID run vs. ACS800

  24. CONTROL CONNECTIONS

  25. Control connections Standard control connections (JCON-01) 1 2 3 4 5 6 7 8 9

  26. Control connections New control board • Some features needed for Industrial drive market are missing in JCON-01  new control board (JCON-11) • Sets the standard for the I/O and terminal numbering for the next generation Industrial drive products • Target for sales release: Q2/2009

  27. Control connections JCON-11 changes vs. JCON-01 • Changes: • 2 more RO • 1 dedicated DIL added • 1 AO changed from V to mA • 1 DIO is left out • Dedicated PTC/KTY input left out • however, one of the DIs can be configured as a PTC input • No. of GND terminals is reduced, but terminal size increased • 7 segment display is left out • Modbus / D2D link: • galvanic isolation • can configured either as a D2D or Modbus link • FPGA and RAM changed • “Future proof” terminal numbering (may not be the same as in the picture) • Possibility to split DI’s as two groups (in JCON-01 DI + DI/O signals were isolated as one group, in JCON-11 they are isolated as two groups that can be split) • New MU with bigger memory • New and old ones are not compatible with each other

  28. Control connections Standard control connections (JCON-11) • Connections: • 3 RO • 6 DI (one can be used as a PTC input) • 1 dedicated DIL • 2 DIO (can be used also as pulse input or output) • 2 AO (mA) • 2 AI (configurable mA or V) • Galvanically isolated RS485 link – can be configured alternatively either as Modbus or as D2D link • STO • Possibility for external 24 V DC supply • PC tool & control panel connection (can be used also for Modbus monitoring) • New Memory Unit • “Future proof” terminal numbering (may not be the same as in the picture)

  29. Control connections Control connections - highlights • Safe Torque Off (STO) as standard • SIL3 (IEC 61508) / Safety category 4 (EN954-1) • Solutions for other safety features available by external options • Safe Stop 1 (SS1), SIL3 • Safe Brake Control (SBC), SIL2 • Safe Limited Speed (SLS), SIL2 • Safe Direction (SDI), SIL2 • Safe Speed Monitor (SSM) , SIL2 • Safe Stillstand, SIL2

  30. Control connections ACS850-04 ACS850-04 Safe Torque Off interface STO

  31. Control connections Control connections - highlights • High flexibility • Configurable DIO, can be used also as a pulse input or output • Drive to drive link as standard • Enhanced features like multicasting and supervision of follower status • Memory Unit • Stores the complete software and parameter settings • Makes the recommissioning of the unit fast and easy • Gives a possibility for software and parameter configuration at e.g. ABB or OEM workshop before sending it to customer • Possibility to connect 24VDC external power supply

  32. OPTIONS

  33. Options Control & communication options 1/2 Two slots for control options 1 2 * When this module is used, the lower part of the control unit cover cannot be used

  34. Options Control & communication options 2/2 One slot for communication options 3

  35. Options Main circuit options • Flexibility with different main circuit options • Mains choke • EMC filter C3 • EMC filter C2 • Braking chopper (standard in frames A – D) • Braking resistor • Common mode filters • dU/dt filter • DC connection

  36. Options EMC filter options         Built-in option  External option - Not available * Max. cable length 100 m

  37. Options C3 (2nd env) EMC filters • Frames A – B • An external plug-in filter in the input terminals • Extra height ca. 150 mm • but due to the free space requirement above (200mm) the effect to the total height is much smaller! • If the height is critical, but there is space on the side, the external C2 filter is the solution • Frames C – G • Optional built-in EMC filter • In frames C and D possible to retrofit afterwards (a separate “lid” in the cover)

  38. Options C2 (1st env) EMC filters • Frames A – D • An external filter (same filters as in ACSM1) • Frames E0 & E • Optional built-in EMC filter • Frame G • Not available

  39. Options Dynamic braking options Braking choppers • In a common DC system several choppers can operate simultaneously Braking resistors • Available for different kind of pulse duty performance • Equipped with a thermal sensor as standard

  40. Options Main circuit options

  41. Options User interface – control panel Standard delivery • No control panel

  42. Options User interface – control panel Assistant control panel • Option + J400 • With real time clock • Incl. Control panel holder in the unit • The same holder can be used also in the cabinet door

  43. Options User interface – control panel Control panel holder in the unit • Option +J414 • Incl. control panel holder • No control panel – just a dummy panel with status LEDs

  44. Options User interface – control panel Control panel holder in the door • Option + J410 • Incl. Control panel • Incl. Control panel holder • Incl. IP54 kit • Incl. 3m cable • No control panel holder in the unit

  45. Options User interface – control panel Without control unit cover • Option + 0C103 • No control panel • No control panel holder

  46. Options Control panel and control unit options

  47. PC TOOLS

  48. PC tools DriveStudio Commissioning, tuning and monitoring tool • Parameters setting and signal monitoring • Data logger and on-line signal monitoring • Backup and restore • Context sensitive helps • Start-up and Diagnostic Assistants

  49. PC tools Sizing tool DriveSize • PC tool for sizing the motor and drive

  50. DOCUMENTATION

More Related